Rain Bird Falcon 6504 Bedienungsanleitung

Rain Bird Nicht kategorisiert Falcon 6504

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rain Bird Falcon 6504 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 61 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
Rain Bird Corporation
6991 E. Southpoint Road
Tucson, AZ 85756
Phone: (520) 741-6100
Fax: (520) 741-6522
Rain Bird Corporation
970 West Sierra Madre Avenue
Azusa, CA 91702
Phone: (626) 812-3400
Fax: (626) 812-3411
www.rainbird.com
® Registered trademark of Rain Bird Corporation
© 2023 Rain Bird Corporation 10/23 D#: D42375
Falcon® 6504 Rotor
Installation and Operating Guide
Pull-Up Slot
Nozzle Retention
Arc Adjustment Slot
A
B
C
D
E
English
Arc Adjustment
The arc is adjustable from 40°–360° (PC units only). All part-circle
Falcon® 6504 rotors are factory preset to approximately 180 degrees.
It can be adjusted from the right trip. The left trip is fixed.
Align Fixed Left Trip (A)
1. Pull up turret and turn to the left trip point (counterclockwise). Caution: If the rotor does not
turn easily, first turn it right (clockwise) to the right trip point.
2. Next turn the turret until the arrow points in the direction you want to set the left edge trip.
Nozzle Installation (D & E)
1. Insert the Pull-up Tool into the pull-up slot, turn 90 degrees, and lift up stem. Use the
Hold-up tool to support the riser in this extended position.
2. Loosen the nozzle retention screw until it no longer obstructs the nozzle opening in the
nozzle housing.
3. Insert the color-coded nozzle firmly into the opening until it is flush with the nozzle turret.
4. Tighten the nozzle retention screw clockwise to secure the nozzle. The screw threads must
engage the nozzle surface to ensure proper seating of the nozzle.
5. To remove the nozzle, first back out the nozzle retention screw. Then insert a flat-head
screwdriver into the slot in the lower right side of the nozzle to pry it loose.
To increase the arc: (B)
1. While holding the nozzle turret at the fixed left stop, insert tool or screwdriver into the
adjustment socket.
2. Turn the screwdriver counter clockwise (+) to increase the arc.
3. Each full turn of the counterclockwise turn of the screwdriver will add
45 degrees of arc.
4. When the maximum arc of 360 degrees has been set, you will feel some resistance in the
adjustment screw. Do not adjust the rotor beyond the maximum arc.
To decrease the arc: (C)
1. While holding the holding turret at the fixed left stop, insert tool or screwdriver into the arc
adjustment socket.
2. Turn the screwdriver clockwise (-) to decrease the arc.
3. Each full clockwise turn of the screwdriver will remove 45 degrees of arc.
4. When the minimum arc of 40 degrees has been set, you will feel some resistance in the
adjustment screw. Do not adjust the rotor below the minimum arc.
Radius Adjustment (radius can be reduced up to 25%)
1. Insert tool or screwdriver into the nozzle retention socket.
2. Turn the screwdriver clockwise to reduce radius, and counterclockwise to increase radius.
Note: Interrupting water stream decreases distribution uniformity.
Falcon
®
6504 Nozzle Performance
IMPERIAL
Pressure
psi
Nozzle Radius
ft.
Flow
gpm
Precip
In/h
Precip
In/h
30 04 39 2.9 0.37 0.42
06 43 4.2 0.44 0.50
40 04 41 3.3 0.38 0.44
06 45 4.9 0.47 0.54
08 49 6.6 0.53 0.61
10 51 8.1 0.60 0.69
12 53 9.7 0.66 0.77
14 55 11.3 0.72 0.83
16 55 12.6 0.80 0.93
18 59 13.7 0.76 0.87
50 04 41 3.7 0.42 0.49
06 47 5.5 0.44 0.51
08 51 7.4 0.55 0.63
10 53 9.1 0.62 0.72
12 55 11.0 0.70 0.81
14 59 12.7 0.70 0.81
16 61 14.3 0.74 0.85
18 59 15.4 0.85 0.98
60 04 41 4.0 0.46 0.53
06 47 6.0 0.52 0.60
08 51 8.2 0.61 0.70
10 55 10.0 0.64 0.73
12 57 12.2 0.72 0.83
14 61 14.0 0.72 0.84
16 63 15.7 0.76 0.88
18 63 17.1 0.83 0.96
70 04 41 4.4 0.50 0.58
06 49 6.3 0.51 0.58
08 51 8.9 0.66 0.76
10 57 10.8 0.64 0.74
12 59 13.2 0.73 0.84
14 61 15.2 0.79 0.91
16 63 16.9 0.82 0.95
18 65 18.3 0.83 0.96
80 04 43 4.6 0.48 0.55
06 49 6.9 0.55 0.64
08 53 9.4 0.64 0.74
10 55 11.6 0.74 0.85
12 61 14.0 0.72 0.84
14 61 16.2 0.84 0.97
16 63 18.1 0.88 1.01
18 65 19.6 0.89 1.03
90 18 65 21.7 0.99 1.14
METRIC
Pressure
bar
Nozzle Radius
m
Flow
m3/h
Flow
l/m
Precip
mm/h
Precip
mm/h
2.1 04 11.9 0.66 10.98 9 11
06 3.1 0.95 15.90 11 13
2.5 04 12.3 0.72 11.92 10 11
06 13.5 1.05 17.56 12 13
08 14.9 1.50 25.20 13 16
10 15.5 1.84 30.60 15 18
12 16.2 2.20 36.60 17 19
14 16.8 2.57 42.60 18 21
16 16.8 2.86 47.40 20 24
18 18.0 3.11 51.60 19 22
3.0 04 12.5 0.78 13.02 10 12
06 14.1 1.16 19.34 12 13
08 15.1 1.56 26.04 14 16
10 15.8 1.92 31.99 15 18
12 16.4 2.31 38.44 17 20
14 17.2 2.68 44.63 18 21
16 17.4 3.00 49.95 20 23
18 18.0 3.25 54.11 20 23
3.5 04 12.5 0.85 14.09 11 13
06 14.9 1.26 20.96 11 13
08 15.5 1.69 28.24 14 16
10 16.2 2.08 34.70 16 18
12 16.8 2.52 41.98 18 21
14 18.0 2.91 48.45 18 21
16 18.6 3.27 54.53 19 22
18 18.1 3.53 58.78 22 25
4.0 04 12.5 0.89 14.91 11 13
06 14.4 1.34 22.33 13 15
08 15.5 1.83 30.44 15 17
10 16.6 2.23 37.17 16 19
12 17.3 2.72 45.28 18 21
14 18.5 3.12 52.01 18 21
16 19.1 3.50 58.37 19 22
18 19.0 3.81 63.45 21 24
4.5 04 12.5 0.96 15.94 12 14
06 14.6 1.40 23.33 13 15
08 15.5 1.95 32.43 16 19
10 17.1 2.37 39.44 16 19
12 17.7 2.89 48.17 18 21
14 18.6 3.32 55.38 19 22
16 19.2 3.71 61.82 20 23
18 19.5 4.03 67.12 21 24
5.0 04 12.7 1.01 16.84 13 15
06 14.9 1.47 24.50 13 15
08 15.7 2.05 34.16 17 19
10 17.2 2.50 41.64 17 19
12 18.1 3.04 50.72 19 21
14 18.6 3.51 58.49 20 23
16 19.2 3.91 65.11 21 24
18 19.8 4.23 70.51 22 25
5.5 04 13.1 1.04 17.39 12 14
06 14.9 1.56 25.79 14 16
08 16.1 2.13 35.54 16 19
10 16.8 2.63 43.84 19 22
12 18.6 3.18 52.92 18 21
14 18.6 3.67 61.23 21 25
16 19.2 4.10 68.40 22 26
18 19.8 4.44 74.07 23 26
6.0 18 19.8 4.79 79.77 24 28
6.2 18 19.8 4.93 82.13 25 29
Precipitation rates based on half-circle operation
Square spacing based on 50% diameter of throw
Triangular spacing based on 50% diameter of throw
Performance data collected in zero wind conditions.
Performance data derived from tests that conform with ASABE Standards;
ASABE S398.1.

Produktspezifikationen

Marke: Rain Bird
Kategorie: Nicht kategorisiert
Modell: Falcon 6504

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rain Bird Falcon 6504 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Rain Bird

Rain Bird

Rain Bird Falcon 6504 Bedienungsanleitung

10 März 2024
Rain Bird

Rain Bird 550 Bedienungsanleitung

10 Dezember 2023

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

J.P. Instruments

J.P. Instruments EDM-900 Bedienungsanleitung

18 April 2024
Tascam

Tascam VSR-265 Bedienungsanleitung

18 April 2024
IFM

IFM DI6001 Bedienungsanleitung

18 April 2024
Best Fitness

Best Fitness BFE1 Bedienungsanleitung

18 April 2024
AMX

AMX PC1 Bedienungsanleitung

18 April 2024
Mikrotik

Mikrotik SXT LTE6 kit Bedienungsanleitung

18 April 2024
IFM

IFM PPA060 Bedienungsanleitung

18 April 2024
EMG

EMG 81 Bedienungsanleitung

18 April 2024
IFM

IFM LDL200 Bedienungsanleitung

18 April 2024
Güde

Güde = GDM 450 VD Bedienungsanleitung

18 April 2024