QSC I/O-USB Bridge Bedienungsanleitung

QSC Nicht kategorisiert I/O-USB Bridge

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für QSC I/O-USB Bridge (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
ÂŽ
™
Hardware Quick Start Guide
Q-SYS™ I/O-USB Bridge
• Read these instructions
and keep a copy on
hand.
• Heed and follow
all warnings and
instructions.
• Install only in
accordance with
the manufacturer’s
instructions.
• Use only attachments
and accessories that
are specied by the
manufacturer.
• Refer all servicing
to qualied service
personnel.
• Adhere to all applicable
local codes.
• Use only a Class 2 LPS
power supply.
IMPORTANT SAFETY INSTRUCTIONS
TD-000543-01-B
*TD-000543-01*
EN
Maintenance and Repair
WARNING: Advanced technology, e.g., the use of modern
materials and powerful electronics, requires specially adapted
maintenance and repair methods. To avoid a danger of
subsequent damage to the apparatus, injuries to persons and/
or the creation of additional safety hazards, all maintenance or
repair work on the apparatus should be performed only by a QSC
authorized service station or an authorized QSC international
distributor. QSC is not responsible for any injury, harm or related
damages arising from any failure of the customer, owner or user
of the apparatus to facilitate those repairs.
TD-000543-01-B 2
EN
FCC Statement
NOT: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RoHS Statement
The QSC Q-SYS I/O-USB Bridge is in compliance with European Directive
2011/65/EU – Restriction of Hazardous Substances (RoHS2).
The QSC Q-SYS I/O-USB Bridge is in compliance with “China RoHS”
directives.
3 TD-000543-01-B
EN
Connections and controls
1 2 3 4
Front panel
1. USB 2.0 Type A host ports—Total maximum current
available from these ports is 500 mA with PoE or external 12 V 2A
DC supply.
2. USB 2.0 Type B device port—Connect to a host PC to bridge
Q-SYS audio and/or video (UAC / UVC).
3. Power LED indicator.
4. ID button and LED indicator.
Press the button to identify this unit in Q-SYS Designer or Q-SYS
Congurator.
The LED blinks when this device’s ID mode is enabled by pressing
the ID button or through Q-SYS Designer or Q-SYS Congurator.
Packing List
Item Quantity
I/O-USB Bridge (includes Euro connectors for RS232 and
external power)
1
Plastic anchors for wall mounting (in fastener kit) 4
#6 pan head screws (in fastener kit) 4
Warranty document 1
TD-000543-00 Quick Start Guide 1


Produktspezifikationen

Marke: QSC
Kategorie: Nicht kategorisiert
Modell: I/O-USB Bridge

Brauchst du Hilfe?

Wenn Sie Hilfe mit QSC I/O-USB Bridge benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert QSC

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-