QSC I/O-8 Flex Bedienungsanleitung

QSC niet gecategoriseerd I/O-8 Flex

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für QSC I/O-8 Flex (16 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
™
Hardware User Guide
I/O-8 Flex – Channel Expander
TD-000520-00-A
*TD-000520-00*
2
TD-000520-00-A
EN
EXPLANATION OF TERMS AND SYMBOLS
The term “ ” indicates instructions regarding personal safety. If the instructions are not followed the result may WARNING!
be bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are CAUTION!
not followed, it may result in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of
theprocedure.
The term " " is used to indicate additional useful information.NOTE
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-
insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important
safety, and operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
• - If installed in a closed or multi-unit rack assembly, the ambient operating Elevated Operating Ambient
temperature of the rack environment may be greater than room ambient. Consideration should be given to
ensure that the maximum operating temperature range (0°C to 50°C (32°F to 122°F ) is not exceeded.
• – Installation of the equipment in a rack should be such that the amount of air flow Reduced Air Flow
required for safe operation of the equipment is not compromised.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not submerge the apparatus in water or liquids.
7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
8. Clean only with a dry cloth.
9. Install in accordance with the manufacturer's instructions.
10. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
11. Do not unplug the unit by pulling on the cord, use the plug.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Adhere to all applicable, local codes.
16. Consult a licensed, professional engineer when doubt or questions arise regarding a physical equipment installation.
3
EN
TD-000520-00-A
Maintenance and Repair
WARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially
adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons
and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only
by a QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury,
harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
IMPORTANT!: PoE+ Power Input - Requires IEEE 802.3at Class 4 PSE able to source full power
(25.5W at LAN A port on the I/O-8 Flex channel expander).
IMPORTANT!: The Q-SYS I/O-8 Flex may operate at elevated temperatures and therefore its exterior
may become noticeably warm. This is normal. The Q-SYS I/O-8 Flex is designed with convection
cooling in mind and therefore incorporates industrial high-temp components to accommodate higher
operating temperatures.
Expected Product Life Cycle Storage Temperature range: Relative Humidity:: 20 years, -20°C to + 70°C, range of
5 - 85% RH non-condensing.
Warranty
For a copy of the QSC Limited Warranty, visit the QSC, LLC. website at www.qsc.com
Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC, LLC., en www.qsc.com
Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC, LLC.à www.qsc.com
Besuchen Sie die Webseite von QSC, LLC. (www.qsc.com) um eine Kopie der beschränkten Garantie von QSC zu erhalten.
如果您想要QSC有限保修的複印本，请造访QSC音频产品的网站www.qsc.com
Для получения копии ограниченной гарантии QSC посетите веб-сайт QSC, LLC., расположенный по
адресу www.qsc.com.
www.qsc.com QSC QSC  
QSC限定保証の複製には、QCSのウェブサイトwww.qsc.comにアクセスしてください。

Produktspezifikationen

Marke: QSC
Kategorie: niet gecategoriseerd
Modell: I/O-8 Flex

Brauchst du Hilfe?

Wenn Sie Hilfe mit QSC I/O-8 Flex benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd QSC

QSC

QSC DCA 1622 Bedienungsanleitung

22 September 2024
QSC

QSC Cinema Core 110c Bedienungsanleitung

20 September 2024
QSC

QSC AcousticDesign YS8T Bedienungsanleitung

6 September 2024
QSC

QSC AcousticCoverage AC-C4T-nb Bedienungsanleitung

2 September 2024
QSC

QSC CX168 Bedienungsanleitung

31 August 2024
QSC

QSC I/O-8 Flex Bedienungsanleitung

30 August 2024
QSC

QSC Core 510i Bedienungsanleitung

9 August 2024
QSC

QSC Q-SYS NV-32-H Bedienungsanleitung

4 August 2024
QSC

QSC Attero Tech unDNEMO Bedienungsanleitung

29 Juli 2024
QSC

QSC CX-Qn 8K8 Bedienungsanleitung

25 Juli 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

Hilti

Hilti AI T43-P Bedienungsanleitung

22 September 2024
Allen & Heath

Allen & Heath iDR0 Bedienungsanleitung

22 September 2024
Beurer

Beurer HK 47 Bedienungsanleitung

22 September 2024
Autel

Autel MaxiScan MS300 Bedienungsanleitung

22 September 2024
Harvia

Harvia Xenio CX170XW Bedienungsanleitung

22 September 2024
Jensen

Jensen XDA91RB Bedienungsanleitung

22 September 2024
Planet

Planet MFB-F60 Bedienungsanleitung

22 September 2024
IFM

IFM OG5046 Bedienungsanleitung

22 September 2024
IFM

IFM SBY323 Bedienungsanleitung

22 September 2024
CyberPower

CyberPower HT1208TC Bedienungsanleitung

22 September 2024