Pyle PMX6BU Bedienungsanleitung

Pyle Stabmixer PMX6BU

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PMX6BU (12 Seiten) in der Kategorie Stabmixer. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
PMX6BU
Wireless DJ Sound FX Audio Mixer
Wireless BT Streaming Stage & Studio Mixer System
with Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio
www.PyleUSA.com
2
PMX6BU Wireless DJ Sound FX Audio Mixer
Wireless BT Streaming Stage & Studio Mixer System with
Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio
System Pairing - Connection Setup:
1. Be sure that the DJ Sound FX Audio Mixer switch is set to POWER OFF
position.
2. Turn each channel and volume controls to position.LEVEL MASTER 0
3. Next, turn ON the unit and receiver. Ensure both units are fully charged
(if the battery indicator is red, then it requires charging). LED
4. Use an Aux (3.5mm) audio cable to connect the wireless audio receiver's
into a compatible speaker audio input jack -- and ensure if the ' ' Aux
mode on the connected speaker is activated.
5. Pair your wireless receiver with the audio mixer.
*See the included 'Quick Start Guide':
Press the ‘POWER button on the wireless receiver (the indicator a. EMIT
light will blink).
indicator is blinking, press the button (the b. While the EMIT 5.8G/BT
indicator light will remain solid).RXD
indicator light remains solid, press and hold the c. While the RXD
button for ~ 5 seconds (or until the ‘RXD indicator blinks red).5.8G/BT
indicator light blinks red, hit the switch and power d. While the RXD ON
the mixer unit.
e. Press the Lock Code button on the rear of the mixer unit. Then press
and hold the Match Code button for about ~5 seconds or until the
Work LED indicator blinks. The system is pairing while the RXD
indicator on the receiver blinks -- and the Work LED indicator on the
mixer blinks. Wait until the Work LED indicator on the mixer remains
solid to proceed to the next step.
f. While the Work LED indicator light on the mixer remains solid, press
the Lock Code button to secure the wireless pairing connection
(if a successful wireless pairing connection is made, the RXD indicator
on the receiver will stop blinking red).
Stream some sound! You can now connect the wireless receiver to a g.
compatible speaker system via Aux-Input connection cable.
www.PyleUSA.com
3
6. Adjust and set the volume control levels accordingly. Begin playing
audio through channel 1 while slowly adjusting the control to the LEVEL
desired setting. Proceed to adjust the settings accordingly for each audio
channel in use.
Limitless Speaker Connection
… + N
5.8GHz receiver
1
3
2N
N+1


Produktspezifikationen

Marke: Pyle
Kategorie: Stabmixer
Modell: PMX6BU

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PMX6BU benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Stabmixer Pyle

Bedienungsanleitung Stabmixer

Neueste Bedienungsanleitung für -Kategorien-