Pyle PAD12MXUBT Bedienungsanleitung

Pyle Plattenspieler PAD12MXUBT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PAD12MXUBT (14 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/14
www.PyleUSA.com2
For the best results and the satisfaction from your new unit, please
read this manual thoroughly, and retain it for future reference.
ATTENTION
To avoid the possibility of malfunction/damage to the product, damage to
data, or damage to other property. Please follow the points as below.
OPERATION AND MAINTENANCE
• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the device, TV, or radio may generate
noise.
• In order to prevent the possibility of panel disguration, unstable operation, or
damage to the internal components. Do not expose the device to excessive dust
or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or
in a car during the day).
• Do not place vinyl, plastic or rubber objects on the device, since this might
discolor the panel.
When cleaning the device, use a dry and soft cloth. Do not use paint thinners,
cleaning uids, or chemical impregnated wiping cloths.solvents,
• Condensation can occur in the device due to rapid, drastic changes in ambient
temperature when the device is moved from one location to another, or aircon-
ditioner is turned on or off. For example, using the device while condensation is
present can cause damage. If there is reason to believe that condensation might
have occurred, leave the device for several hours without turning on the power
the condensation has completely dried out.until
• Avoid setting all controls to their maximum. Depending on the condition of the
connected devices, doing so may cause feedback and may damage the speakers.
When turning on the power in your audio system, always turn on the power
amplier LAST, to avoid speaker damage. When turning the power off, the power
amplier should be turned off FIRST for the same reason.
www.PyleUSA.com 3
PRECAUTIONS WHEN USING THE USB 2.0 AND 5V DC TERMINALS
Precautions When Using the USB 2.0 and 5V DC Terminals. When connecting
the USB 2.0 connector to computer, please must abide following points. If not,
it may cause computer crash, breakdown or losing data. If the computer or
mixer crash, rstly restart the application software or computer operating
system or disconnect the mixer, then power on again.
• Use an AB type USB cable. USB 3.0 cable cannot be used.
• Before connecting the computer to the USB 2.0 terminal, exit from any power-
saving mode of the computer (such as suspend, sleep, standby).
CONTROLS AND FUNCTIONS for PAD12MXUBT - PAD22MXUBT
12
3 5
20
22
16
14
4 6 7 8 11
12
13
19
1. [MIC/LINE & GUITAR] Input
jack, this combo jack can be
used to connect the mono
signal such as XLR microphone
or 1/4” line input device, or
connect with an instrument
such as an electric guitar or
an electric bass, they need to
be converted with SWITCH .
2. [MIC/LINE & GUITAR]
Converting switch, for conver-
ting the different input source.
Press down this switch to
connect with a high impe-
dance audio source, such as
electric guitar or bass. When
the switch is bounced up, it
connects with XLR microphone
or 1/4” low impedance audio
device.


Produktspezifikationen

Marke: Pyle
Kategorie: Plattenspieler
Modell: PAD12MXUBT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PAD12MXUBT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Plattenspieler Pyle

Bedienungsanleitung Plattenspieler

Neueste Bedienungsanleitung für -Kategorien-