PVI VeCODER ULTRA Bedienungsanleitung

PVI Nicht kategorisiert VeCODER ULTRA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr PVI VeCODER ULTRA (21 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
VECODER ULTRA IP SERIES H264 ENCODER
Pro Video instruments
VeCoder Ultra IP Series H264 Encoder
1
VECODER ULTRA IP SER IES H.26 4
PRODUC T SPECS & FEAT URES
Power 220V/110V AC –
Encoding - Latest H.264 Encoding Technology (Depending on Model) HD 720P/ 1080I/1080P @ 60 Hz Ultra Low
Latency. Standard Baseline/Main/High Prole Support. HDMI 2.0 and HDCP compliant.
Supports ACC/Mpeg1L2 Audio
CBR/VBR (constant & Variable) Bitrates opon available with up to 12mphs bitrate.
Four Stream Encoders for support of mulple styles of formats and encoding preferences to dierent servers.
RTMP, HLS, HTTP, UDP, RTSP
Ability to Distribute any 720p/1080P Video DIRECTLY to unlimited Smart TVs, Mobile Phones, Tablets, PCs, IP
Box es
IPTV over LAN - -Fi Internet Wi –
Plays Directly on Any Smart TV - Add More Modules or units for More Channels
Change Channels on TV via TV Remote Control in your SmartTV IPTV app .
Built-In Gigabit Server to stream directly to hundreds of simultaneous Player
-Can also stream to YouTube - Wowza - Akamai and others
Dual Simultaneous Encoders and scalers to create two versions of the same channel
-opmize for TV play and mobile Play simultaneously
5 Logo Generators CG
Modular-Expandable-Reliable
Pro Video instruments
VeCoder Ultra IP Series H264 Encoder
2
POWERING THE DEVICE . QUICK GUDIE FIR ST MODULE IP - 192.168.1.168 – –
a) Connect your included Power cord to the unit.
b) Once the unit is powered on insert your valid HDMI Video Signals into the HDMI port
c) Set your computer to a stac IP as 192.168.1.100 ( see below on how to set your local stac IP connecon)
d) Connect your PC ETHERNET PORT to the First Module ETHERNET PORT using a patch cordVeCoder’s .
Depending on the amount of modules you have will determine the available channels and Default ip’s. We
recommend you Connect to the rst Module with the default IP label of 192.168.1.168.( Please refer to
picture above)
e) Run VLC VideoLan video playback soware ( www.videolan.org ) On VLC > MEDIA > OPEN NETWORK
STREAM > You should now see the video playing on VLC hp://192.168.1.168/0.ts.
f) Each LAN Port is used for Each Module.
g) Each Module has four channels/HDMI Inputs. Depending on the module you are connected to will
determine the Stream IP you use in VLC. Please refer to the Welcome Status page of the Module you are
connected to for the IP stream available .
NOTE: If the above is not working, please check all connecons, Network Sengs, and ensure your video source
is working. You could also try with another pc, or reset the VeCoder unit by pressing the Reset buon for 20
seconds on the rear panel of the unit . This will default the modules IP sengs back to default of 192.168.1.168.


Produktspezifikationen

Marke: PVI
Kategorie: Nicht kategorisiert
Modell: VeCODER ULTRA

Brauchst du Hilfe?

Wenn Sie Hilfe mit PVI VeCODER ULTRA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert PVI

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-