PureTools PT-TOOL-500 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für PureTools PT-TOOL-500 (24 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
User Manual
PT-TOOL-500
User Manual
HDMI 2.0 LCD Test Pattern Monitor
Model PT-TOOL-500
Designed in Germany
© 2016 PureLink GmbH All rights reserved.
User Manual
PT-TOOL-500
The PT-TOOL-500 HDMI 2.0 LCD Test Pattern Monitor has been tested for conformance to safety regulations
and requirements, and has been certied for international use. However, like all electronic equipments, the PT-
TOOL-500 should be used with care. Please read and follow the safety instructions to protect yourself from possi-
ble injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
Use only the power adapter and power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Table of Contents
1. Safety and Notice 2 ..................................................................................
2. Introduction ....................................................................................... 3
3. Features ........................................................................................... 3
4. Package Contents 3 ..................................................................................
5. Specication ....................................................................................... 4
6. Connection Diagram 5 ................................................................................
7. Panel Description 6 ..................................................................................
8. Menu Operation 7 ....................................................................................
9. Generator ......................................................................................... 8
10. Receiver ........................................................................................... 9
11. HDCP Test 10 ........................................................................................
12. EDID Analysis 11 .....................................................................................
13. LOOP Test 12 .........................................................................................
14. Ethernet Control (Tcp/Ip) 13 ..........................................................................
15. Upgrade PT-TOOL-500 17 .............................................................................
16. EYE Pattern 20 .......................................................................................
17. Warranty .........................................................................................22
2
User Manual
PT-TOOL-500
4K2K60 4:4:4 8bit, 4K2K60 4:2:0 16bit HDR pattern generator
4.3” touch panel
Supports mouse control
Supports user control device through Ethernet
Firmware update through USB Flash Drive
Supports user defined pattern up to 2GB
Embedded LINUX KERNAL system with limitless extension
Scrambler supported for videos over 340MHz output wise
Loop test capability to provide statistics analysis for connection stability
Supports HDMI loop through function
HDCP test allow verify HDCP of HDMI source and transmit HDCP encrypted video
Qualified physical layer performance to ensure the best compatibility
Battery powered for portability, it can extend operation time with full load up to 4 hours
Rechargeable battery design with short charging time about 2 hours.
3. Features
The PT-TOOL-500 HDMI 2.0 LCD Test Pattern Monitor is a versatile HDMI 2.0 toolbox with full bandwidth and HDCP
2.2 support. For ease of HDMI 2.0 installations, PT-TOOL-500 is equipped with both HDMI 2.0 pattern generator
and analyzer. With this handy and portable gadget, users will appreciate at the built-in long hour operation char-
geable battery, video patterns, touch panel control, cloud based rmware upgrade access and many other features
such as HDCP analyzer or loop test in single piece of device. In the meantime, PT-TOOL-500 can support 8 channel
LPCM audio with selectable sample rate. One more attractive feature of PT-TOOL-500 comes from bypassing HDMI
input to the connected display or built-in 4.3” touch panel to allow users to verify HDMI sources instantly.
PT-TOOL-500 is the most cost eective HDMI 2.0 tool in the market to make HDMI installation much easier than
ever.
2. Introduction
3
1. Before using the PT-TOOL-500, please plugging the power adapter to switch off the
shipping mode.
i
• 1x PT-TOOL-500
• 1x IR blaster 1x IR receiver
• 2x DC 24V
• 1x User Manual
4. Package Contents


Produktspezifikationen

Marke: PureTools
Kategorie: Nicht kategorisiert
Modell: PT-TOOL-500

Brauchst du Hilfe?

Wenn Sie Hilfe mit PureTools PT-TOOL-500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert PureTools

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-