Promethean ActivPanel AP4-80E Bedienungsanleitung

Promethean Desktop ActivPanel AP4-80E

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Promethean ActivPanel AP4-80E (4 Seiten) in der Kategorie Desktop. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Installation Guide
TP-2018-IG-V01
powered by
Installation
2 - ActivPanel Installation Guide
1 To open the ActivPanel carton, you will need to remove the plastic locks by squeezing the tabs and
pulling outward.
2 Lift the cover off the ActivPanel carton.
3 Assess the room or wall where the ActivPanel will be installed.
Check for pipes, electrical, etc.
Determine what wall anchors are necessary
Locate mounting studs
4 Reference the ActivPanel Installation Guide for measurements. Mark the measurements on the wall
and drill the holes.
5 Remove the ActivPanel wall bracket from ActivPanel, rotate it 180 degrees, and attach to the wall.
The at side goes against the wall.
6 Remove the vertical wall mounting bars from the ActivPanel.
7 Flip the vertical ActivPanel mounting bars over and reinstall them.
ActivPanel Installation Guide - 3
8 Install the ActivConnect G-Series bracket on the ActivPanel using the following instructions depending
on the model of the ActivPanel. Please reference your ActivPanel packaging or packaging label to
nd the size and model number.
ActivPanel v4 - 55”, 65”, 75” and 84” Ac vPanelti v4 - 70.5 and 80
Install the mounting bracket included in the
ActivPanel packaging on the bottom center
of the back of the ActivPanel.
Rear bottom of ActivPanel v4 - 55”, 65”, 75, 84”
Install the mounting bracket included
in the ActivConnect G-Series box by
using the pre-mounted screws provided
on the back of the ActivPanel in the
upper corner.
Rear of the ActivPanel v4 - 70”, 80”.5
Place the ActivConnect in the mounting bracket with the port sides facing the left
and upward.
9 To connect the ActivConnect G-Series to the ActivPanel, please follow the connectivity
instructions below.
VIDEO SOURCE
WORKS WITH
TOUCH
PORT
HDMI 1 Touch 1
HDMI 2 Touch 1
HDMI 3 (CONNECT
G-SERIES TO THIS PORT) Touch 2
VGA 1 Touch 1
VGA 2 Touch 1
YPbPr Touch 1
CVBS Touch 1
VIDEO SOURCE
WORKS WITH
TOUCH
PORT
HDMI 1 Touch 1
HDMI 2 Touch 2
HDMI 3 Touch 3
HDMI 4 Touch 4
Plug the power cable into the DC 5V port, USB cable into the USB port (NOT the USB/OTG), HDMI
cable into the HDMI port, and he Ethernet cable into the LAN port on the ActivConnect. t
In order for the touch and video to work together, you must install the USB and HDMI
connection from the ActivConnect to the ActivPanel. Reference the table below to ensure that
you are using the correct active touch port that corresponds with the video source.
ActivPanel v4 - 55”, 65”, 75” and 84” ActivPanel v4 - 70” and 80” .5


Produktspezifikationen

Marke: Promethean
Kategorie: Desktop
Modell: ActivPanel AP4-80E

Brauchst du Hilfe?

Wenn Sie Hilfe mit Promethean ActivPanel AP4-80E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Desktop Promethean

Bedienungsanleitung Desktop

Neueste Bedienungsanleitung für -Kategorien-