Projecta IDC45 Bedienungsanleitung

Projecta Ladegerät IDC45

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta IDC45 (16 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
45 Amp, 3 Stage Switchmode
INTELLI-CHARGE
DC/SOLAR BATTERY CHARGER
P/No. IDC45
2
WARNINGS
• Explosive gases may escape from the battery during charging.
Prevent flames and sparks and provide adequate ventilation.
• Before charging, read the instructions.
• FOR CHARGING 12 VOLT LEAD ACID BATTERIES ONLY.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• Corrosive substances may escape from the battery during charging and damage
delicate surfaces. Store and charge in a suitable area.
• This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use
the appliance safely.
• Fit fuses as close to the batteries as possible to protect the cable in case of
short circuit.
FEATURES
The IDC45 DC-DC charger is purposely designed for charging auxiliary batteries.
It includes all the features needed to maintain the auxiliary battery to its optimum
condition and to prolong the battery life.
SWITCHMODE TECHNOLOGY
The IDC45 converts your vehicle’s 12VDC/24VDC alternator power to the voltage
level allowing your batteries to be fully charged, prolonging battery life and
reliability. With the latest synchronous switching technology, efficiency of IDC45
exceeds 94% at typical full load condition.
DUAL INPUT OPERATION
Allows two energy sources to power the IDC45 simultaneously. Solar input takes
precedence if solar and alternator inputs are present. When solar input cannot provide
enough energy to the load, the IDC45 will draw power from solar and alternator
simultaneously.
SOLAR MPPT
The IDC45 utilises sophisticated MPPT (Maximum Power Point Tracking) solar
regulator technology. MPPT maximises the power generated from the solar panels
to the auxiliary battery.
3
SUPERIOR 3 STAGE CHARGING
Using high speed microcontroller and proprietary charging algorithm, the IDC45
delivers a sophisticated 3 stage charging process resulting in a faster and more
powerful charge, ideal for deep cycle batteries. The first stage, bulk (constant current),
charges the battery faster while the second stage, absorption (constant voltage),
ensures the battery is thoroughly charged. The final stage, float, maintains the battery
at a safe voltage allowing it to be maintained and ready for use indefinitely.
MULTI-CHEMISTRY SUPPORT
The IDC45 supports GEL, AGM, WET and CALCIUM batteries. If the calcium battery
mode is selected, periodic equalisation will be provided to the calcium battery for
removing acid stratification.
IGNITION CONNECTION
The ignition connection activates the lower input voltage operation to suit vehicles
with smart (variable voltage) alternators.
TEMPERATURE COMPENSATION
The IDC45 is supplied with a 2 metre temperature sensor. The sensor monitors the
battery temperature and adjusts (compensates) the charger’s output to prevent
overcharging. This is ideal for batteries used in warmer climates or environments.
REMOTE CHARGER STATUS INDICATION
A pink wire is provided for driving an external panel mount LED indicator (Eg Narva
P/No. 62090BL) to show the status of the charger. It shows whether the auxiliary
battery is on charge (Solid Colour) or the charger is in a fault condition (Flashing).
PROTECTIVE FEATURES
Spark-Free Protection
The IDC45 will not start charging the battery (no output) unless the load is securely
connected. It prevents the output leads from sparking due to accidental short circuit
making the charger safer to use around batteries.
Reverse Connection Protection
Reverse connection on input and output terminals does not damage IDC45 internal
circuit. The IDC45 detects reverse connection condition and indicates whether input
or output connection is reversed.
Over and Under Voltage Protection
The charger will automatically shut down if there is an over voltage or under
voltage problem.
Over Temperature Protection
The charger will lower its output current if the temperature of the unit begins
to overheat.

Produktspezifikationen

Marke: Projecta
Kategorie: Ladegerät
Modell: IDC45

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta IDC45 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ladegerät Projecta

Projecta

Projecta BLT700 Bedienungsanleitung

13 September 2024
Projecta

Projecta PC2100 Bedienungsanleitung

2 September 2024
Projecta

Projecta IC5000 Bedienungsanleitung

5 August 2024
Projecta

Projecta IC2500 Bedienungsanleitung

2 August 2024
Projecta

Projecta IC1500L Bedienungsanleitung

1 August 2024
Projecta

Projecta IC1500 Bedienungsanleitung

30 Juli 2024
Projecta

Projecta BM320 Bedienungsanleitung

29 Juli 2024
Projecta

Projecta AC250B Bedienungsanleitung

28 Juli 2024
Projecta

Projecta BLT100 Bedienungsanleitung

27 Juli 2024
Projecta

Projecta BLT200 Bedienungsanleitung

27 Juli 2024

Bedienungsanleitung Ladegerät

Neueste Bedienungsanleitung für -Kategorien-

MSW

MSW S-CHARGER-20A.2 Bedienungsanleitung

16 Oktober 2024
MSW

MSW S-CHARGER-10A.2 Bedienungsanleitung

16 Oktober 2024
ABB

ABB EVLunic Bedienungsanleitung

9 Oktober 2024
Powerplus

Powerplus POWDP9062 Bedienungsanleitung

8 Oktober 2024
Cellular Line

Cellular Line Wireless Power Dock Bedienungsanleitung

7 Oktober 2024
HQ

HQ CHARGER14 Bedienungsanleitung

4 Oktober 2024
Makita

Makita DC18RD Bedienungsanleitung

4 Oktober 2024
HQ

HQ CH02E Bedienungsanleitung

2 Oktober 2024
Venom

Venom VS5007 Bedienungsanleitung

1 Oktober 2024
Venom

Venom VS5010 Bedienungsanleitung

1 Oktober 2024