Projecta BM320 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta BM320 (16 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
SMART BATTERY GUAGE
BATTERY METER
P/No. BM320
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before installing the product.
WARNINGS
• Risk of explosive gas. Working in the vicinity of a lead-acid battery can be dangerous
• Batteries might release explosive gases during normal operation and charging
• Before using the product, read and follow the instructions carefully. Follow all
manufacturer’s instructions
• Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near
the battery
• Remove rings, bracelets, necklaces and watches when working with a lead-acid battery
• Before accessing the battery leads (Red for positive and Black for negative), disconnect the
all devices or power sources from sockets and dc terminals provided by the product
• Do not submerge the product in water or expose to rain
• Not recommended to use the product for critical power backup application
• Designed to work with 12V lead acid battery only
• This appliance is not intended for use by young children or infirm persons without
supervision. Young children should be supervised to ensure that they do not play with
the appliance
• Ensure that all cable connections have the correct polarity and are protected against
accidental short circuit
• Do not allow water or other liquids to enter the installation area
3
OVERVIEW
Projecta BM320 – A sophisticated, full colour LCD monitor that accurately displays a
battery’s total capacity, overall health and general status. It is Ideal for camper trailer and
caravan interiors as it is housed in a modern and simple to install enclosure. The BM320
comes with all the necessary components to connect to your battery system.
It has the following features:
• 2.4” full colour LCD display
• Configurable Low battery capacity and battery health alarm
• Suitable for popular deep cycle AGM lead acid battery
• Using patented technology to monitor battery characteristics like battery state of charge
and state of health
DISPLAY SCREEN INSTALLATION
Choose a flat location which is easily accessible and easy to view the display screen.
The location should be indoors away from weather.
Screw the mounting clip using supplied self-tapping screws ensuring that the arrow is
pointing “UP”.
Drill a 15mm Diameter hole 20mm from the screw hole as pictured to allow the connector to
pass through.


Produktspezifikationen

Marke: Projecta
Kategorie: Ladegerät
Modell: BM320

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta BM320 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ladegerät Projecta

Bedienungsanleitung Ladegerät

Neueste Bedienungsanleitung fĂĽr -Kategorien-