Projecta IC5000L Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta IC5000L (20 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
INTELLI-CHARGE LITHIUM
5 STAGE SWITCHMODE
BATTERY CHARGER
P/No.s IC2500L, IC5000L
2
IMPORTANT SAFETY INFORMATION
Please read this manual thoroughly before use and store in a safe place for future reference.
WARNING
• Explosive gases may escape from the battery during charging. Prevent flames and
sparks. Provide adequate ventilation.
• Before charging, read the instructions.
• For indoor use. Do not expose to rain.
• For charing Lithium Iron Phosphate batteries ONLY (for the size and voltage specified in
the specifications table).
• Disconnect the 240V mains supply before making or breaking the connections
to the battery.
• The battery charger must be plugged into an earthed socket-outlet.
• Connection to supply mains is to be in accordance with National wiring rules.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• If the AC cord is damaged do not attempt to use. It must be replaced or repaired by
a qualified person.
• Corrosive substances may escape from the battery during charging and damage delicate
surfaces. Store and charge in a suitable area.
• Ensure all vehicle accessories including lights, heaters, appliances etc are turned off
prior to charging.
• This charger is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Young children should be supervised to ensure that they do not play with the appliance.
3
5 STAGE AUTOMATIC CHARGING
This is a fully automatic battery charger with 5 charge stages.
Automatic charging protects your battery from being overcharged so you can leave the
charger connected to the battery indefinitely.
5 stage charging is a very comprehensive and accurate charging technique that gives
your battery longer life and better performance compared to using traditional chargers.
The 5 charge stages are:
Soft Start 1, Soft Start 2, Bulk, Absorption and Float.
SOFT START 1
This is a preliminary charge that is for heavily discharged batteries where the voltage is
between 1-8 Volts. Charge is limited to 5% of set current.
SOFT START 2
This is a preliminary charge that is for discharged batteries where the voltage is between
8-10 Volts. Charge is limited to 25% of set current.
BULK (CONSTANT CURRENT)
The Bulk stage reduces charging time by charging the battery at the maximum
rate (constant current) to a set voltage, at which point the battery is approximately
80% charged.
ABSORPTION (CONSTANT VOLTAGE)
The absorption stage charges the battery to 100% by adjusting the charge rate allowing
the battery to absorb more power.
VOLTAGE
CURRENT
(AMPS)
STAGE 1 2 4 53
SOFT START 1
Increases battery
life by gently
starting to charge
the battery
5% of bulk
SOFT START 2
Increases battery
life by gently
starting to charge
the battery 25%
of bulk
BULK CHARGE
Reduces charging
time by delivering
maximum charge
to set voltage
ABSORPTION
Ensures a full
charge to the
battery without
overcharging
FLOAT
Float charge
maintains the
battery at 100%
charge


Produktspezifikationen

Marke: Projecta
Kategorie: Ladegerät
Modell: IC5000L

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta IC5000L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ladegerät Projecta

Bedienungsanleitung Ladegerät

Neueste Bedienungsanleitung für -Kategorien-