Proaim CG219 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Proaim CG219 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Universal DSLR Camera Cage (CG219)
A s s e m b l y M a n u a l
Camera Cage with slide bars
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmiîž©ed by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permiîž©ed by the applicable copyright
statutes or in wriîžźng by the Publisher.
3 x Allen Keys Sizes:
(3/16mm,4mm & 3mm)
Top Handle
Wooden Side Handle
Top Plate Camera Plate
2 x Slide Bars
2
DSLM Camera Cage Setup
• Remove both the Allen bolts of the camera
plate with the help of a 3/16mm Allen key and
aîž©ach it to the boîž©om part of the camera
cage.
Top Handle
• Then Align the top plate with the camera cage
and secure it properly with the help of a
3/16mm Allen Key by inserîžźng both the Allen
bolts on the top plate.
• Place the top handle above the top plate.
NOTE: The provided mulîžźple threads of the top
plate allow you to mount the top handle
anywhere according to your requirement.
• Aer placing the top handle on the top plate,
match the bolt with the side threads of the
handle, insert the buîž©on head, and îžźght it
with the help of a 4mm Allen key.
• Remove both the Allen bolts on the top plate
with a 3/16mm Allen key.
• Then secure it with the help of a 3/16mm
allen key.
NOTE: You can adjust both the top and base
plates to your requirements by loosening the
bolt and sliding it in.
3
• The wooden side handle is now properly ght.
Interchange Slide Bars
• Then remove the buon head from both sides
of the camera cage with the help of a 4mm
Allen key.
• Match the provided screw hole on the boom
of the camera plate with the camera
hole and screw it îžźghtly with(Not Included)
the help of a screwdriver.
Side Handle
• Match the wooden side handle with the side
thread of the camera cage and insert the side
handle and îžźghten it properly with its knob.
NOTE: You can hold the handle anywhere on the
provided mulîžźple threads of the Camera Cage
according to your requirement.
• Loosen the knob of the wooden side handle
and remove the handle.
• Aach the Camera (Not Included) into the
Camera cage properly by sliding it onto the
shoe mount on the top plate.


Produktspezifikationen

Marke: Proaim
Kategorie: Nicht kategorisiert
Modell: CG219

Brauchst du Hilfe?

Wenn Sie Hilfe mit Proaim CG219 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Proaim

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-