PlayBridgeDealer Dealer4 Maintenance Bedienungsanleitung

PlayBridgeDealer Diversen Dealer4 Maintenance

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr PlayBridgeDealer Dealer4 Maintenance (36 Seiten) in der Kategorie Diversen. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/36
__________________________________________1_________________________________________
Dealer4 Maintenance, Adjusting and Cleaning Manual ver: 1.1
Version information:
Ver 1.0: First issued : 14/04/2008
- use word “Board” instead of “Card Box”
- combine with “Delaer4 Adjusting Manual 1V0”
Ver 1.1 issued: 30/01/2014
- added Front Board Pocket Adjustment
- added Adjustment of Gates
- updated instructions and materials to represent newest version of Dealer 4 machines
__________________________________________2_________________________________________
1 Dealer4 Maintenance....................................................................3
2 Dealer4 Cleaning ...........................................................................5
2.1 Cleaning tools......................................................................................... 5
2.2 Cleaning Feeder Rollers..........................................................................6
2.3 Cleaning Driving Rollers..........................................................................7
2.4 Cleaning the Camera and illumination LEDs............................................9
2.5 Cleaning photointerruptors.................................................................. 11
3 Dealer4 Adjustments................................................................... 15
3.1 Feeder Gap Adjustment ....................................................................... 15
3.1.1 Define proper gap size........................................................................................17
3.1.2 Measure existing gap size...................................................................................18
3.1.3 Feeder gap adjustment for machines with serial numbers less than 5027 ............20
3.1.4 Feeder gap adjustment for machines with serial numbers 5028 and above .........23
3.1.5 Adjusting the Feeder Gap without a Feeler Gauge ..............................................25
3.2 Card Width Adjustment........................................................................ 28
3.3 Board Pocket Adjustment..................................................................... 30
3.4 Front Board Pocket Adjustment ........................................................... 31
3.5 Inspection and Adjustment of Gates .................................................... 32
__________________________________________3_________________________________________
1 Dealer4 Maintenance
In this manual the following signs are used to highlight important information:
Critical information for safety and proper machine operation. Always read and follow.
Warnings
Additional important information
The Dealer4 is designed to operate without any special maintenance. Apart from the cleaning and
adjustment when required (see chapter 3) there is no other regular maintenance required. The Dealer4
does not require any lubrication, there are no belts, seals or any other elements which have to be
replaced on a regular basis by the user.
Despite that the Dealer4 is virtually maintenance free it is recommended that the machine be serviced
by an authorized Service Center at least every 3 years or every 40000 dealt boards. During these services
the machine will be disassembled, thoroughly cleaned, all parts will be checked and replaced if required.
Then the machine will be adjusted and tested. Serviced machines will provide correct, reliable operation
and decrease possibility of malfunction.
The only elements which are subject to wear during normal operation are the rubber rollers. There are
two types of rollers used in the machine
- 4 Pairs of Green polyurethane rollers used as a Drive Rollers. Some older machines may still have black
rubber Drive Rollers. These typically last 40000 deals.
For machines with a Serial Number less than 4218:
- 2 Black Rubber Feeder Rollers
For machines with a Serial Number 4218 and above:
- 1 Long Feeder Roller. These may be varying colors such as black, blue or grey.

Produktspezifikationen

Marke: PlayBridgeDealer
Kategorie: Diversen
Modell: Dealer4 Maintenance

Brauchst du Hilfe?

Wenn Sie Hilfe mit PlayBridgeDealer Dealer4 Maintenance benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Diversen PlayBridgeDealer

PlayBridgeDealer

PlayBridgeDealer Dealer4 Maintenance Bedienungsanleitung

27 August 2024
PlayBridgeDealer

PlayBridgeDealer Board Number Reader Bedienungsanleitung

27 August 2024
PlayBridgeDealer

PlayBridgeDealer 4 plus Bedienungsanleitung

27 August 2024

Bedienungsanleitung Diversen

Neueste Bedienungsanleitung fĂĽr -Kategorien-

ION

ION ICADE Bedienungsanleitung

16 Oktober 2024
Walkera

Walkera Goggle 3 Bedienungsanleitung

16 Oktober 2024
Walkera

Walkera Goggle 4 Bedienungsanleitung

16 Oktober 2024
Kerbl

Kerbl 81685 Cat flap Bedienungsanleitung

6 Oktober 2024
Tanita

Tanita HC-212F Breath Checker Bedienungsanleitung

6 Oktober 2024
Somfy

Somfy Telis Lounge Bedienungsanleitung

5 Oktober 2024
Navman

Navman NavBus Bedienungsanleitung

5 Oktober 2024
Trelock

Trelock LS 320 Bedienungsanleitung

5 Oktober 2024
Bobike

Bobike Maxi City Bedienungsanleitung

5 Oktober 2024
Tanita

Tanita 1210N Bedienungsanleitung

5 Oktober 2024