Planet POE-163 Bedienungsanleitung

Planet Netzwerkkarte/Adapter POE-163

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet POE-163 (4 Seiten) in der Kategorie Netzwerkkarte/Adapter. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Content
Thank you for purchasing PLANET IEEE 802.3at High
Power over Ethernet Injector, POE-163 and POE-164.
Model LAN Port Speed PoE Standard PoE Budget
POE-163 10/100/1000Mbps 802.3at/af 30Watts
POE-164 10/100Mbps
Terms of “802.3at PoE Injector” in following
section of this User’s Manual means the POE-163
and POE-164.
Upon open the box of the IEEE 802.3at High Power
over Ethernet Injector and carefully unpack it. The
box should contain the following items:
The IEEE 802.3at High Power over Ethernet
Injector x 1
User’s Manual x 1
AC Power Cord x 1
If any of these are missing or damaged, please
contact your dealer immediately, if possible, retain
the carton including the original packing material,
and use them against to repack the product in case
there is a need to return it to us for repair.
2. Product Features
Interface
2-Port RJ-45 interfaces
1-Port outputData + Power
1-Port Data input
1 AC 100-240V input power socket
Power over Ethernet
High Power over Ethernet Mid-Span PSE
IEEE 802.3at PoE compliant
Backward compatible with IEEE 802.3af PD
device
Support PoE Power up to 30 Watts for PoE port
Auto-detect of PoE IEEE 802.3at/af equipment
and devices from being damaged by incorrect
installation
Remote power feeding up to 100m
Hardware
Plastic case
LED indicators for Power LED and Active LED
(PoE ready / In-use)
Standard Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T (POE-163 only)
IEEE 802.3at High Power over Ethernet
IEEE 802.3af Power over Ethernet
FCC Part 15 Class B, CE
Note
PSE (Power Sourcing Equipment) is
a device (switch, or hub for instance)
that will provide power in a PoE setup.
Maximum allowed continuous output
power per such device in IEEE 802.3af
is 15.4W, 30W in IEEE 802.3at.
PD (Powered Device) is a PoE-enabled
terminal by PSE and thus consumes
energy, such as IP Phones, network
cameras and Wireless access points, etc
3. Product Specication
Product POE-163 POE-164
Hardware Specication
Interface
“Data” Input
Port 1 x RJ-45 STP
“PoE (Data
+ Power)”
Output Port
1 x RJ-45 STP
AC Input
power socket 1
LED Indicator
System: Power x 1 (Green)
PoE Port: Active, PoE ready / In
Use x 1 (Green)
Network Cable
10Base-T: 2-Pair UTP Cat. 3, 4, 5,
up to 100m (328ft)
100Base-TX: 2-Pair UTP Cat. 3, 4,
5, up to 100m (328ft)
1000Base-T: 2-Pair UTP Cat. 5,
5e, 6 up to 100m (328ft)
(POE-163 only)
EIA/TIA- 568 100-ohm STP (100m)
Data Rate 10/100/1000Mbps 10/100Mbps
Dimension (W x D x H) 115 x 62.5 x 31 mm
Weight 177g
Unit Output Voltage DC 53V, 0.6A
Power Requirement 100-240V AC, 50/60Hz, 0.75A
Power Consumption 30 Watts max.
Number of device can
be powered 1
Operating Temperature 0 ~ 50 Degree C
Storage Temperature -10 ~ 70 Degree C
Operating Humidity 5 ~ 95%, Relative Humidity, non-
condensing
Storage Humidity 5 ~ 95%, Relative Humidity, non-
condensing
Power over Ethernet
PoE Standard IEEE 802.3at High Power over
Ethernet / Mid-Span PSE
PoE Power Output DC 53V / 30 Watts
PoE Power Supply Type Mid-Span
Power Pin Assignment 4/5(+), 7/8(-)
Standards Conformance
Standards Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast
Ethernet
IEEE 802.3ab 1000Base-T Gigabit
Ethernet
(POE-163 only)
IEEE 802.3at High Power over
Ethernet
IEEE 802.3af Power over Ethernet
Regulation Compliance FCC Part 15 Class B, CE
4. Product Outlook
Figure 1: shows overviews of 802.3at PoE Injector.
Figure 1: POE-163 / POE-164 Outlook
LED Indicators
LED Color Function
POWER Green Lights to indicate that the 802.3at PoE
Injector has power.
ACTIVE Green
Slow blinks to indicate the port is not
providing 53V DC in-line power.
Lights to indicate the port is providing
53V DC in-line power.
5. Hardware Installation
The following section describes the hardware
features of 802.3at PoE Injector. Before connecting
any network device to the 802.3at PoE Injector, read
this chapter carefully.
This POE-163 provides three different running
speeds – 10Mbps / 100Mbps / 1000Mbps and the
POE-164 provides two different running speeds
– 10Mbps / 100Mbps in the same device for
automatically distinguishes the speed of incoming
connection. Please refer to following sections for
detail information about IEEE 802.3at High Power
over Ethernet Injector.
5-1 Before Installation
Before your installation, it is recommended to check
your network environment. If there is any IEEE
802.3at devices need higher power to power on and
work normally, the 802.3at PoE Injector can provide
you a way to supply power for this Ethernet device
conveniently and easily. The 802.3at PoE Injector
equips with an AC power cord with 100-240V AC
input and injects DC 53V power into the pin of the
twisted pair cable (pair 4, 5 [+] and pair 7, 8 [-] ).
If there is very difcult to nd a power socket for
AC-DC Adapter of your non IEEE 802.3at networked
device, the 802.3at PoE Injector and POE-162S
can provide you a way to supply DC power for this
Ethernet device conveniently and easily.
Note
The 802.3at PoE Injector and POE-162S
can be installed in pair. However, the
use of third-party device is allowed if the
device complied with IEEE 802.3at Power
over Ethernet.
The 802.3at PoE Injector Installation
1. Connect the AC power cord to “AC slot” of
802.3at PoE Injector; the “POWER” LED will be
steady on.
2. Connect a standard network cable from Switch
/ workstation to “LAN” port of 802.3at PoE
Injector.
3. Connect the long cable that will be used to
connect to the remote device to the port “POE”.
4. Connect with IEEE 802.3at / 802.3af devices,
due to the capability of IEEE 802.3at / 802.3af
Power over Ethernet, the 802.3at PoE Injector
can directly connect with any IEEE 802.3at /
802.3af end-nodes such as PTZ (Pan, Tilt &
Zoom) network cameras, PTZ Speed Dome, color
touch- screen Voice over IP (VoIP) telephones,
multi- channel wireless LAN access points where
support IEEE 802.3at / 802.3af In-line Power over
Ethernet port. The screen in Figure 2 appears.
Switch
100 meters
PoE
PoE PTZ
IP Camera
802.3at PoE Injector
AC
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Power Line (AC)
AC
Figure 2: Connection to IEEE 802.3at / 802.3af Devices
- 9 -
- 10 -
- 11 -
- 12 - - 13 -
The ACTIVE LED slow blinks to indicate the port is
not providing 53V DC in-line power, once 802.3at
PoE Injector detects the existence of an IEEE 802.3at
/ 802.3af device, the ACTIVE LED indicator will be
steady on to shows it is providing power.
Note
1. Since the 802.3at PoE Injector PoE
port supports 53V DC PoE power
output, please check and assure the
Powered Device (PD) acceptable DC
power range is 53V DC. Otherwise, it
will damage the Powered Device (PD).
2. If the connected device is not fully
complying with IEEE 802.3at /
802.3af Power over Ethernet or in-
line power device, the LED indicator
of 802.3at PoE Injector will not be
steady on.
The 802.3at PoE Injector and POE-162S, the
IEEE 802.3at Injector Splitter Installation
1. Connect the AC power cord to “AC slot” of
802.3at PoE Injector; the “POWER” LED will be
steady on.
2. Connect a standard network cable from “POE”
port of 802.3at PoE Injector to “PoE In” port of
POE-162S. The “ACTIVE” LED of 802.3at PoE
Injector and POE In-use LED of POE-162S will
light on continuance.
3. Connect a standard network cable from Switch
/ workstation to “LAN” port of 802.3at PoE
Injector.
4. Connect the UTP cable in the package from
“Ethernet” port of POE-162S to the RJ-45 port of
remote device.
5. Adjust proper DC power output and connect DC
plug from “DC OUT” of POE-162S to remote
device.
6. Power on the remote device and its power LED
indicator will remains on.
Switch
Power 12V/24V
POE-162S
100 meters
PoE
AC DC
Non-PoE PTZ
IP Camera
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Power Line (AC)
AC
DC Power Line (DC)
802.3at PoE Injector 802.3at PoE
Splitter
Figure 3: Connection architecture over 802.3at PoE
Injector / POE-162S
Note
1. According to IEEE 802.3at / 802.3af
Power over Ethernet, the 802.3at
PoE Injector will not inject power to
the cable if not connecting to IEEE
802.3at / 802.3af devices.
2. Please ensure the POE-162S output
voltage is correct before applying
power to remote device.
The 802.3at PoE Injector and POE-E201, the
IEEE 802.3at PoE Extender Installation
1. Connect the AC power cord to “AC slot” of
802.3at PoE Injector; the “POWER” LED will be
steady on.
2. Connect a standard network cable from “POE”
port of 802.3at PoE Injector to the “IN” port of
POE-E201.
3. The 802.3at PoE Injector delivers both Ethernet
Data and PoE power over UTP cable to the
POE-E201 and the “ACTIVE” LED of 802.3at PoE
Injector and “PoE IN” LED of POE-E201 will light
on continuance.
4. Connect the additional standard network cable that
will be used to connect to the remote Powered
Device (PD) to the “OUT” port of POE-E201.
5. The “OUT” port is also the power injectors which
transmit DC Voltage to the standard network
cable and transfer data and power simultaneously
between the 802.3at PoE Injector and PD.
6. Once POE-E201 detects the existence of an
IEEE 802.3at / 802.3af device, the “PoE OUT”
LED indicator will be steady, ON to shows it is
providing power.
802.3at
PoE Extender
PoE PoE
100 meters100 meters
200 meters
Power Line (AC)
AC
1000Base-T UTP
PoE
1000Base-T UTP with PoE
PoE IP Camera
802.3at PoE Injector
Figure 4: Connection architecture over 802.3at PoE
Injector / POE-E201
Note
1. If the connected device is not fully
complying with IEEE 802.3at /
802.3af standard or in-line power
device, the PoE OUT LED indicator of
POE-E201 will not be steady on.
2. According to IEEE 802.3at / 802.3af
standard, the POE-E201 will not inject
power to the cable if not connecting
to a standard IEEE 802.3at / 802.3af
device.
Customer Support
Thank you for purchase PLANET products. You can
browse our online FAQ resource at the PLANET
Web site rst to check if it could solve you issue. If
you need more support information, please contact
PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=2
Switch support team mail address :
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2013.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
EC Declaration of Conformity
For the following equipment:
*Type of Product : Single-Port 10/100/1000Mbps IEEE 802.3at PoE+ Injector (30Watts)
Single-Port 10/100Mbps IEEE 802.3at PoE+ Injector (30Watts)
*Model Number : POE-163, POE-164
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.).
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on (2004/108/EC).
For the evaluation regarding the EMC, the following standards were applied:
EN55022 (2006 + A1:2007 + A2:2010)
EN 61000-3-2 (2006 + A1:2009 + A2:2009)
EN 61000-3-3 (2008)
EN55024 (2010)
IEC 61000-4-2 (2008)
IEC 61000-4-3 (2006+A1: 2007 + A2:2010)
IEC 61000-4-4 (2004 + A1:2010)
IEC 61000-4-5 (2005)
IEC 61000-4-6 (2008)
IEC 61000-4-8 (2009)
IEC 61000-4-11 (2004)
Responsible for marking this declaration if the:
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Product Manager
Taiwan 29th March, 2013
Place Date Legal Signature
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Produktspezifikationen

Marke: Planet
Kategorie: Netzwerkkarte/Adapter
Modell: POE-163

Brauchst du Hilfe?

Wenn Sie Hilfe mit Planet POE-163 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Netzwerkkarte/Adapter Planet

Planet

Planet IPOE-270-12V Bedienungsanleitung

11 August 2024
Planet

Planet POE-171A-60 Bedienungsanleitung

10 August 2024
Planet

Planet WNL-U555HA Bedienungsanleitung

5 August 2024
Planet

Planet POE-400 Bedienungsanleitung

4 August 2024
Planet

Planet POE-163 Bedienungsanleitung

1 August 2024
Planet

Planet POE-152 Bedienungsanleitung

1 August 2024
Planet

Planet POE-164 Bedienungsanleitung

29 Juli 2024
Planet

Planet VC-205-KIT Bedienungsanleitung

29 Juli 2024
Planet

Planet VC-203PR Bedienungsanleitung

27 Juli 2024
Planet

Planet HPOE-460 Bedienungsanleitung

22 Juli 2024

Bedienungsanleitung Netzwerkkarte/Adapter

Neueste Bedienungsanleitung für -Kategorien-

Devolo

Devolo MicroLink dLAN duo Bedienungsanleitung

16 Oktober 2024
Edimax

Edimax HP-5001K Bedienungsanleitung

16 Oktober 2024
Edimax

Edimax EW-7822ULC Bedienungsanleitung

9 Oktober 2024
TRENDnet

TRENDnet TEW-624UB Bedienungsanleitung

5 Oktober 2024
NEC

NEC NP06LM Bedienungsanleitung

4 Oktober 2024
Alecto

Alecto HPD-142 Bedienungsanleitung

4 Oktober 2024
StarTech.com

StarTech.com ST1000SPEX2T Bedienungsanleitung

3 Oktober 2024
StarTech.com

StarTech.com ST1000SPEX2LT Bedienungsanleitung

3 Oktober 2024
LevelOne

LevelOne WUA-1610 Bedienungsanleitung

3 Oktober 2024
Tenda

Tenda W311MA Bedienungsanleitung

2 Oktober 2024