Planet HPOE-460 Bedienungsanleitung

Planet Netwerkkaart/adapter HPOE-460

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet HPOE-460 (4 Seiten) in der Kategorie Netwerkkaart/adapter. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Introduction

1.1 Checklist

Thank you for purchasing our HPOE-460 4-Port Gigabit

IEEE 802.3at High Power over Ethernet Injector Hub,

the High Power over Ethernet Injector Hub package shall

contains following contents:

Check the contents of your package for following

parts:

 High Power over Ethernet Injector Hub x 1

 User's Manual x 1

 Power Adapter x 1

 Power Cord x 1

If any of these pieces are missing or damaged, please

contact your dealer immediately, if possible, retain the

carton including the original packing material, and use

them against to repack the product in case there is a

need to return it to us for repair.

1.3 Features

8-Port RJ-45

4-Port 10/100/1000Mbps “Data input”

4-Port 10/100/1000Mbps “Data + Power output”

Power over Ethernet

IEEE 802.3at and IEEE 802.3af Power over Ethernet

Mid-Span PSE

Up to 4 IEEE 802.3at / 802.3af devices powered

DC 52V power over RJ-45 Ethernet cable to devices

with Ethernet port

PoE power up to 30.8 Watts (802.3at PoE) / 15.4

Watts (802.3af PoE) for each PoE ports

Remote power feeding up to 100m

Full power support for per PoE port

Automatically detect powered device (PD)

Circuit protection prevents power interference

between ports

1.5 Product Outlook

52V~ 56V DC

“ ”

LED Denition:

LED Color Function

Power Green Lights to indicate that the

HPOE-460 has power.

PoE Ready /

In-Use Green Lights to indicate the port is

providing 52V DC in-line power.

1.4 Specication

Product HPOE-460

Hardware

Interface

“Data” Input Ports 4 x RJ-45

“Data+Power”

Output Ports 4 x RJ-45

Data Rate 10/100/1000Mbps

LED

System: Power x 1 (Green)

Per PoE Port: PoE ready /

in-use x 4 (Green)

Network Cable

10Base-T: 2-Pair UTP Cat. 5

up to 100m (328ft)

100Base-TX: 2-Pair UTP

Cat. 5 up to 100m (328ft)

1000Base-T: 4-Pair UTP Cat.

5e, 6, up to 100m (328ft)

EIA/TIA-568 100-ohm STP

(100m, 328ft)

Dimension (H x W x D) 26 x 70 x 97mm

Weight 220g

Power Requirement DC 52V~56V

Power over Ethernet

PoE Power Supply Type Mid-Span

PoE Power Output

IEEE 802.3af Per Port DC

52V 15.4 Watts

IEEE 802.3at Per Port DC

52V 30.8 Watts

1.2 About the Power over Ethernet Injector

Hub

The PLANET HPOE-460 is the next generation 4-Port

Gigabit IEEE 802.3at High Power PoE injector Hub,

features both IEEE 802.3af and High Power IEEE

802.3at Power over Ethernet (PoE) that combines up

to 30 Watts power output and data per port over one

CAT 5E / 6 Ethernet cable. It is designed specically to

satisfy the growing demand of higher power consuming

network PD (powered devices) such as PTZ (Pan, Tilt &

Zoom) / Speed Dome network cameras, multi-channel

(802.11a/b/g/n) wireless LAN access points and other

network devices by providing double amount of PoE

power than conventional 802.3af PoE PSE.

The HPOE-460 is installed between a regular Ethernet

Switch and the powered devices; it injects power to the

PDs without affecting data transmission performance.

It offers a cost effective and quick solution to upgrade

network system to IEEE 802.3af / IEEE 802.3at Power

over Ethernet system without replacing the existing

Ethernet Switch. There are 8 RJ-45 STP ports on the

front panel of the HPOE-460, half of the ports on right

panel function as “Data input" and the other half

on left panel function as "PoE (Data and Power)

output". The 4 "PoE (Data and Power) output”

ports are also the power injectors that transmit DC

voltage to the CAT. 5/5e/6 cable and transfer data

and power simultaneously between the Injectors and

Splitters.

Hardware

Desktop palm size, wall mountable

LED indicator power input indication

FCC Part 15 Class B, CE

100~240V AC, 50/60Hz, 2A universal power supply

adapter with DC 52V / 2.31A power output

 Plug & play

Standard Compliance

IEEE 802.3 10Base-T

IEEE 802.3u 100Base-TX

IEEE 802.3ab 1000Base-T

 IEEE 802.3af Power over Ethernet

 IEEE 802.3at Power over Ethernet Enhancement

2. Hardware Installation

This product provides three different running speeds –

10Mbps, 100Mbps and 1000Mbps in the same device

and automatically distinguishes the speed of incoming

connection.

This section describes the hardware features of HPOE-

460. Before connecting any network device to the HPOE-

460, read this chapter carefully.

2.1. Before Installation

Before your installation, it is recommended to check

your network environment. If there has any IEEE

802.3af / 802.3at device which needs power on, the

HPOE-460 provides you a way to supply power for this

Ethernet device conveniently and easily. The HPOE-460

equips with an AC-DC adapter with DC 52V input and

injects this DC power into the pin of the twisted pair

cable (pair 4, 5 and pair 7, 8).

If there is very difcult to nd a power socket for AC-DC

Adapter of your Non-IEEE 802.3af / 802.3at networked

device, the HPOE-460 and POE-162S / IPOE-162S can

provide you a way to supply DC power for this Ethernet

device conveniently and easily.

The 10Mbps or 100Mbps and 1000Mbps speed, duplex

mode from Data port of HPOE-460 depends on which

Ethernet device attached.

Power Pin Assignment 4/5(+), 7/8(-)

PoE Power Budget 120 Watts

Number of 802.3af PD Class

0, 1, 2, 3 can be powered 4

Number of 802.3at PD Class

1, 2, 3 can be powered 4

Number of 802.3at PD Class

0, 4 can be powered 4

Standards Conformance

Standards Compliance

IEEE 802.3 10Base-T

Ethernet

IEEE 802.3u 100Base-TX

Fast Ethernet

IEEE 802.3ab 1000Base-T

Gigabit Ethernet

IEEE 802.3af Power over

Ethernet

IEEE 802.3at Power over

Ethernet Enhancement

Regulation Compliance FCC Part 15 Class B, CE

Environment

Operating Temperature 0 ~ 50 Degree C

Storage Temperature -10 ~ 70 Degree C

Humidity 5 ~ 95% (Non-condensing)

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

2.2 HPOE-460 and POE-162S, the IEEE

802.3at Injector / Splitter and Equipment

Installation

For the places hard to nd the power inlet, the

HPOE-460 and IEEE 802.3at High Power over Ethernet

Splitter (POE-162S / IPOE-162S) provides the easiest

way to power your Ethernet devices such as IP Camera

on the ceiling and the Wireless Access Point installed

on the top of the building. With 4 10/100/1000Base-T

Gigabit Ethernet ports, the HPOE-460 supports full

52V DC power for any remote IEEE 802.3af / 802.3at

powered device (PD).

To control the power system of your networking devices,

the HPOE-460 can directly co-work with PoE IP phone to

build VoIP telephony network in the ofce. Furthermore,

the HPOE-460 can be directly connected to any third

party IEEE 802.3af / 802.3at compliant devices installed

100 meters away.

3. Troubleshooting

This chapter contains information to help you solve

issue. If the High Power over Ethernet Injector Hub

is not functioning properly, make sure the High Power

over Ethernet Injector Hub was set up according to

instructions in this manual.

How to let my Non IEEE 802.3af / 802.3at

network devices work with HPOE-460?

Solution:

You can use PLANET Power over Ethernet Splitter, such

as PLANET POE-162S / IPOE-162S to work as a power

transformer between HPOE-460 and Non IEEE 802.3af /

802.3at devices. The POE-162S and IPOE-162S provide

12V DC and 24V DC voltage output through DIP switch.

The HPOE-460 PoE LED is not light

Solution:

Check the cable connection between HPOE-460 and IEEE

802.3af / 802.3at devices.

DC Power Line (DC)

Power Line

1000Base-T UTP

PoE

1000Base-T UTP with PoE

8-Port Gigabit Switch

HPOE-460

802.3at PoE

PTZ / Speed Dome

IP Camera

30W

802.3af PoE

IP Camera

15W

802.3at PoE Splitter+

Non-PoE Device

802.3at

PoE Splitter

802.3at PoE Multi-Channel

/ High Power

Wireless AP

30W

PoE

Power

Figure 2-1: HPOE-460 Application Topology

Note

1. According to IEEE 802.3af and IEEE

802.3at standard, the HPOE-460 will not

inject power to the cable if not connect

to IEEE 802.3af and IEEE 802.3at

standard devices.

2. Due to the capability of IEEE 802.3af

and IEEE 802.3at standard, the HPOE-

460 can directly connect with any

IEEE 802.3af or IEEE 802.3at standard

compliant end-nodes.

Why can not power my PoE device on when

connect with HPOE-460?

Solution:

1. Please check the cable type of the connection from

HPOE-460 to the other end. The cable should be an

8-wire UTP, Category 5/5e/6, EIA568 cable within 100

meters. A cable with only 4-wire, short loop or over

100 meters, all will affect the power supply.

2. Please check and assure the device that fully complied

with IEEE 802.3af and IEEE 802.3at standard.

Appendix A Networking Connection

RJ-45 Pin Assignments

1000Mbps, 1000Base-T

RJ-45 Connector pin assignment

Contact MDI MDI-X

1 BI_DA+ BI_DB+

2 BI_DA- BI_DB-

3 BI_DB+ BI_DA+

4 BI_DC+ BI_DD+

5 BI_DC- BI_DD-

6 BI_DB- BI_DA-

7 BI_DD+ BI_DC+

8 BI_DD- BI_DC-

Implicit implementation of the crossover function

within a twisted-pair cable, or at a wiring panel, while

not expressly forbidden, is beyond the scope of this

standard.

10/100Mbps, 10/100Base-TX

RJ-45 Connector pin assignment

Contact MDI MDI-X Media

Dependant Interface

MDI-X Media Dependant

Interface -Cross

1 Tx + (transmit) Rx + (receive)

2 Tx - (transmit) Rx - (receive)

3 Rx + (receive) Tx + (transmit)

4, 5 IEEE 802.3af / 802.3at DC 48V / 52V

6 Rx - (receive) Tx - (transmit)

7, 8 IEEE 802.3af / 802.3at DC 0V

The standard RJ-45 receptacle / connector

There are 8 wires on a standard UTP/STP cable and

each wire is color-coded. The following shows the pin

allocation and color of straight cable and crossover cable

connection:

Straight Cable

SIDE 1

SIDE 2

SIDE 1

SIDE 2

1 2 3 4 5 6 7 8

SIDE 2

Crossover Cable

SIDE 1 SIDE 2

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

1 = White/Green

2 = Green

3 = White/Orange

4 = Blue

5 = White/Blue

6 = Orange

7 = White/Brown

8 = Brown

Figure A-1: Straight-Through and Crossover Cable

Please make sure your connected cables are with

same pin assignment and color as above picture before

deploying the cables into your network.

Energy Saving Note of the Device

This power required device does not support Standby mode operation.

For energy saving, please remove the power cable to disconnect the device

from the power circuit.

Without removing power cable, the device wills still consuming power

from the power source. In the view of Saving the Energy and reduce the

unnecessary power consuming, it is strongly suggested to remove the

power connection for the device if this device is not intended to be active.

Produktspezifikationen

Marke:	Planet
Kategorie:	Netwerkkaart/adapter
Modell:	HPOE-460

Brauchst du Hilfe?

Wenn Sie Hilfe mit Planet HPOE-460 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Netwerkkaart/adapter Planet

Planet IPOE-270-12V Bedienungsanleitung

11 August 2024

Planet POE-400 Bedienungsanleitung

4 August 2024

Planet POE-163 Bedienungsanleitung

1 August 2024

Planet POE-164 Bedienungsanleitung

29 Juli 2024

Planet VC-205-KIT Bedienungsanleitung

29 Juli 2024

Planet HPOE-460 Bedienungsanleitung

22 Juli 2024

Bedienungsanleitung Netwerkkaart/adapter

Neueste Bedienungsanleitung für -Kategorien-

Hama 00053302 Bedienungsanleitung

15 September 2024

Asus USB-N13 Bedienungsanleitung

15 September 2024

Edimax EN-9320SFP+ Bedienungsanleitung

15 September 2024

LevelOne USB-0402 Bedienungsanleitung

14 September 2024

Edimax EW-7822UTC Bedienungsanleitung

13 September 2024

TP-Link TL-WN881ND Bedienungsanleitung

11 September 2024

TP-Link TL-WN781ND Bedienungsanleitung

11 September 2024

TP-Link Archer TX20UH Bedienungsanleitung

11 September 2024

TP-Link Archer T2U Plus Bedienungsanleitung

11 September 2024

Edimax EW-7612HPn Bedienungsanleitung

10 September 2024