Phoenix Gold Z6001i Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Phoenix Gold Z6001i (12 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
© 2023 Phoenix Gold | www.phoenixgold.com
COMPACT, CLASS A/B & MONO
Z-SERIES AMPLIFIERS
Model: Z1502i / Z3001i / Z3004i / Z6001i
- compatible with aftermarket & original source unitsOEM Connection Ready
Remote Bass Ready - control the bass level with included ZRBC (Z3001i & Z6001i)
- powers on the amp when audio signal is suppliedHigh Level Auto-Turn On
• Integrated Cooling Fan - regulates temperature for sustained performance
- versatile connectivity to suit any vehicleHigh & Low Level Inputs
- enables maximum current supplyHeavy Duty Connector Block
- protection against thermal damage, 4-Way Protected Circuit
reversed power, speaker polarity and low voltage
SPECIFICATIONS
All specications subject to change without notice.
Z
© 2023 Phoenix Gold | www.phoenixgold.com
Z1502i / Z3001i / Z3004i / Z6001i - Z-Series Ampliers
Specications: Z1502i Z3001i Z3004i Z6001i
Class Class A/B Class A/B Class A/B Class D
Channels 2 1 4 1
Frequency Response 10Hz – 25kHz 20Hz – 250Hz 10Hz – 25kHz 20Hz – 400Hz
RMS Power Rating (1Ω): N/A N/A N/A 1 x 600W
RMS Power Rating (2Ω): 2 x 100W 1 x 300W 4 x 80W 1 x 400W
RMS Power Rating (4Ω): 2 x 65W
1 x 200W Bridged 1 x 205W 4 x 60W 1 x 250W
Signal to Noise Ratio (SNR)
(Full Power) -87dB -87dB -87dB -84dB
Total Harmonic Distortion
(THD) <1% <1% <1% <1%
Low Pass Filter (LPF) 50Hz – 400Hz (6dB/Oct) 50 – 250Hz (12dB/Oct) 50Hz – 400Hz (6dB/
Oct)
50Hz – 250Hz (24dB/
Oct)
High Pass Filter (HPF) 50Hz – 400Hz (6dB/Oct) N/A 50Hz – 400Hz (6dB/
Oct) N/A
Subsonic N/A 10Hz – 55Hz (12dB/
Oct) N/A 10Hz – 55Hz (24dB/
Oct)
Bass Boost @ 45Hz 0 – +18dB 0 – +18dB N/A 0 – +18dB
Crosstalk -56dB N/A -51dB N/A
Input Sensitivity 0.25V – 9.5V 0.25V – 9.5V 0.25V – 9.5V 0.25V – 9.5V
Fuses 1 x 25A 1 x 40A 2 x 25A 2 x 30A
Remote No Yes (Included) No Yes (Included)
High-level Input Via RCA Yes Yes Yes Yes
Auto Turn-on Yes Yes Yes Yes
Phase Control N/A 0° - 180° N/A 0° - 18
Operating Voltage 9V – 16V 9V – 16V 9V – 16V 9V – 16V
Idle Current 0.67A 0.4A 0.57A 0.62A
Current Draw (Max) 27A 35A 46A 57A
Total Efciency (4Ω) 63% 71% 65% 89%
Power Terminal 20mm² 20mm² 20mm² 20mm²
Speaker Terminal 4mm² 4mm² 4mm² 4mm²
Dimensions (LxWxH) 184 x 160 x 48mm 254 x 160 x 48mm 254 x 160 x 48mm 184 x 160 x 48mm
Weight 1.16 kg 1.66 kg 1.76 kg 1.30 kg
© 2023 Phoenix Gold | www.phoenixgold.com
Z1502i / Z3001i / Z3004i / Z6001i - Z-Series Ampliers
Note:
Z1501i, Z3001i and Z3004i are Class A/B ampliers. These ampliers can run very hot
whilst providing high sound quality.
Installation Warnings
1. Ensure the +12V lead is disconnected from the battery before you
connect any new equipment
2. Ensure that the amplier mounting location and holes will not interfere
with the petrol tank, brake lines or electrical wiring.
3. Ensure the amplier is securely fastened to the vehicle to prevent the
amplier from moving and causing damage in the event of an
accident.
4. Ensure all wiring is protected from sharp objects and pinching or
crushing, which could damage the audio system.
5. Ensure the mounting location has sufcient air ow around the
amplier. If the amplier is mounted in an enclosed space, a 3” fan
with ducting should be used to assist with cooling.
6. Ensure the minimum recommended gauge wire/cable or larger for
all amplier connections.
7. Appropriate mounting is essential for the prolonged life expectancy of
any amplier. Select a location that protects from moisture. Keep in
mind that an amplier should never be mounted upside down. Up
side-down mounting will compromise heat dissipation through the heat
sink and could engage the thermal protection circuit.
Disclaimer
Ensure your safety and the well-being of those around you by following these essential guidelines:
• Keep all product materials and packaging away from children, pets, or anyone at risk of suffocation.
Exposure to noise levels above 85 dB can cause permanent hearing damage.
• Extreme sound frequencies reduce perception abilities that are essential in road trafc conditions; do not let loud
volumes distract from being mindful behind the wheel.
Phoenix Gold takes no responsibility for any physical harm or damage caused by improper use of their products.
Ensure that all metals and raw materials are disposed of in accordance with local regulations and environmental
Warranty
Phoenix Gold products come with a limited warranty and are covered by our regional distribution partners and their
terms and conditions. You can nd out more information by contacting your local retailer or distributor.


Produktspezifikationen

Marke: Phoenix Gold
Kategorie: Empfänger
Modell: Z6001i

Brauchst du Hilfe?

Wenn Sie Hilfe mit Phoenix Gold Z6001i benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Phoenix Gold

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-