Phoenix Gold S400.4 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Phoenix Gold S400.4 (12 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
Amplifier Manual
Manuel de l’amplificateur
Features CaractĂŠristiques
Models: S1000.1
S400.4
© 2010 Phoenix Gold • www.phoenixgold.com
• SeriousPerformanceinaCompactPackage
• 18dBVariableLowPassandSubsonicCrossovers(S1000.1)
• 12dBVariableHighandLowPassCrossovers(S400.4)
• HighLevelInputwithSignalSensingTurn-onforEasyOEMintegration
• OversizedDirectInsertPowerandSpeakerTerminals
• RobustUnregulatedPowerSupply
• AudiophileBi-PolarOutputTransistors
• LPL44-LowPassLevelControlReady
• AdvancedThermalandProtectionCircuitry
• Desérieusesperformancesdansunboîtiercompact
• 18dBPasseBasseVariableetSubsoniqueCroisé(S1000.1)
• 12dBHautetPasseBasseVariableCroisé(S400.4)
• LeNiveauSupérieurentrepourl’intégrationdeFABRICANT
D’ORIGINEfacile
• DirigerlePouvoird’InsertionetlesTerminauxdeHaut-parleur
• PouvoirnonRéguléeRobust
• AudiophileTransistorsdeBipolaire
• LPL44-LaPassebasseNivellePrêtdeContrôle
• AvancéThermiqueetlesCircuitsdeProtection
Amplier Owner’s Manual
© 2010 Phoenix Gold • www.phoenixgold.com
MONOBLOCK SPECIFICATIONS
Frequency Response: Âą 1dB from 20Hz to 300Hz
Signal to Noise Ratio: >90dB
Subsonic and Low Pass Crossovers: 18dB per Octave
Low Pass Crossover Range: 30Hz to 300Hz
Subsonic Crossover Range: 10Hz to 55Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range: 200 millivolts to 8 volts
High Level Input Range: 400 millivolts to 12 volts
Lowest Recommend Load: 1 ohm
Typical Efciency: 80%
Damping Factor: Greater than 200
FOUR CHANNEL SPECIFICATIONS
Frequency Response: Âą 1dB from 20Hz to 20kHz
Signal to Noise Ratio: >110dB
High and Low Pass Crossovers: 12dB per Octave
Low Pass Crossover Range: 40Hz to 400Hz
High Pass Crossover Range: 40Hz to 400Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range: 200 millivolts to 8 volts
High Level Input Range: 400 millivolts to 12 volts
Lowest Recommend Load: 4 ohm Bridged or 2 ohm Stereo
Typical Efciency: 50%
Damping Factor Greater than 200
S1000.1
Dynamic Power 14.4Vdc >1% THD 750 x 1 @ 2 ohm
1000 x 1 @ 1 ohm
RMS Power 14.4Vdc ≤ 1% THD 550 x 1 @ 2 ohm
800 x 1 @ 1 ohm
Recommended Fuse Size: 80 Amp
Power/Ground Wire Size: 4 Gauge
Dimensions: 9.1” L x 6.9” W x 2.1” H
230mm L x 175mm W x 52mm H
S400.4
Dynamic Power 14.4Vdc >1% THD 50 x 4 @ 4 ohm Stereo
75 x 4 @ 2 ohm Stereo
150 x 2 @ 4 ohm Bridged
RMS Power 14.4Vdc ≤1% THD 40 x 4 @ 4 ohm Stereo
55 x 4 @ 2 ohm Stereo
110 x 2 @ 4 ohm Bridged
Recommended Fuse Size: 40 amp
Power/Ground Wire Size: 8 Gauge
Dimensions: 9.9” L x 6.9” W x 2.1” H
250mm L x 175mm W x 52mm H
Specifications
© 2010 Phoenix Gold • www.phoenixgold.com
Amplier Owner’s Manual
INPUT
Connectpreampsignalcablesfromtheheadunittotheseterminals.
OUTPUT
Providesafullrangesignalforanadditionalamplier.Thereisnosignal
lossifusingthisoutput.
CROSSOVER FREQUENCY
Controlsthelowpasscrossoverpointforthespeakeroutputs.
BASS BOOST
Variablebassboostfrom0to+18dB@45Hz.
LOW PASS LEVEL CONTROL (LPL)
Thisportisforconnectingtheoptionalremotelevelcontrol(LPL44).This
allowsupto20dBofvolumeadjustment.Thisisnotabassboost,it
controlsthelevelofthelowpasssignal.
LEVEL
Usedtoreachmaximumamplierpowerwithawidevarietyofheadunits.
HI INPUT
Connectafactorysystem’sheadunitoramplieroutputs.UsingtheHIlevelinputthe
amplierwillautomaticallyturnonandoffusingthefactorysystem’saudiosignalasa
trigger.Thehighlevelautoonswitchturnsofftheautoturnonfunction,butthehigh
levelinputstillworksasnormal.
SUBSONIC CROSSOVER FREQUENCY
Controlsthehighpasscrossoverpointforthespeakeroutputstoeliminateextreme
lowfrequencies.
12V+
Thismustbeconnectedtothefusedpositiveterminal(+12V)ofthecar’s
battery.Thefusemustbelocatedwithin18inchesofthebattery.
REMOTE
Thismustbeconnectedtoswitched+12V,usuallyatriggerwirecoming
fromtheheadunitorignition.ThisisnotusedifusingHiinputautoon
feature.
GND
Thismustbeconnectedtothenegativeterminalofthecar’sbatteryor
boltedtoaclean,unpaintedpartofthechassisofthevehicle.
SPEAKER OUTPUTS
Usedtoconnecttheampliertospeakers.S1000.1minimumimpedanceis1ohm.
s1000.1
Monoblock Power Amplifier


Produktspezifikationen

Marke: Phoenix Gold
Kategorie: Empfänger
Modell: S400.4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Phoenix Gold S400.4 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Phoenix Gold

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung fĂźr -Kategorien-