Philips Series 7000 BT7220 Bedienungsanleitung
Philips
Bartschneider
Series 7000 BT7220
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips Series 7000 BT7220 (7 Seiten) in der Kategorie Bartschneider. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/7
BT7220
© 2017 Koninklijke Philips N.V.
All rights reserved
保留所有权利
4222.002.8830.1 (13/2/2017)
> 75% 循环再造纸
2
3
4
5
10
0.5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
>75% recycled paper >75%
papier recyclé
English
General description (Fig.1)
1 Cutting element
2 Vacuum system
3 Length settings
4 Zoom wheel
5 On/off button
6 Battery status indicator
7 Pouch
8 Cleaning brush
9 Cleaning sponge
10 Small plug
11 Supply unit
12 Precision trimmer
13 Detail comb 5mm (L)
14 Detail comb 3mm (M)
15 Beard and stubble comb
Important safety information
Read this important information carefully before
you use the appliance and its accessories and save
it for future reference. The accessories supplied
may vary for different products.
Danger
- Keep the supply unit dry (Fig. 2).
Warning
- To charge the battery, only use the detachable
supply unit (HQ8505) provided with the
appliance.
- The supply unit contains a transformer. Do not
cut off the supply unit to replace it with another
plug, as this causes a hazardous situation.
- This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by
children without supervision.
- Always check the appliance before you use it.
Do not use the appliance if it is damaged, as
this may cause injury. Always replace a
damaged part with one of the original type.
- Do not open the appliance to replace the
rechargeable battery.
Caution
- This appliance is not washable. Never immerse
the appliance in water and do not rinse it under
the tap (Fig. 2).
- Only use this appliance for its intended purpose
as shown in the user manual.
- For hygienic reasons, the appliance should only
be used by one person.
- Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
- Do not use the supply unit in or near wall
sockets that contain an electric air freshener to
prevent irreparable damage to the supply unit.
Electromagnetic fields (EMF)
- This Philips appliance complies with all
applicable standards and regulations regarding
exposure to electromagnetic fields.
General
- The appliance is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Display
Battery status indicator
When the battery is almost empty, the bottom light
of the battery status indicator flashes orange (Fig.
3).
When the appliance is charging, first the bottom
light flashes white, then the second charging light
(Fig. 4), and so on. When the battery is fully
charged, all lights light up white continuously (Fig.
5).
Note: The lights switch off automatically after 30
minutes.
1
2
3
4
5
12
13
6
7
10
8
11
15
14
9
1
Remaining battery capacity
The remaining battery charge is shown by the
lights of the battery status indicator that light up
continuously.
Length settings
The selected length setting is shown on the are
shown above the zoom wheel when you select the
desired hair length setting with the zoom wheel
(Fig. 6).
Charging
Charging takes approx. 1 hour. Charge the
appliance before first use and when the bottom
light of the battery status indicator flashes orange.
1 Make sure the appliance is switched off.
2 Put the supply unit in the wall socket and put
the small plug in the appliance (Fig. 7).
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
When the appliance is fully charged, it has a
cordless operating time of up to 80 minutes.
Using the appliance
Note: This appliance can be used without cord or
directly from the wall socket.
You can use this appliance for a stubble beard and
a short beard. This appliance has an integrated
vacuum system that catches cut beard hair for
a less messy trimming experience.
The vacuum system is activated automatically as
soon as you switch on the appliance.
Note: Switch off and clean the appliance after each
use.
Switching the appliance on and off
Press the on/off button once to switch the
appliance on or off (Fig. 8).
Trimming without comb
- You can use the appliance without beard and
stubble comb to trim hair close to the skin or to
contour the neckline and sideburns. To trim hair
close to the skin, place the flat side of the
trimming head against your skin and make
strokes in the desired direction (Fig. 9).
- For contouring, hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards with
gentle pressure (Fig. 10).
- You can use the precision trimmer to create fine
lines and contours around your facial style,
close to the skin (Fig. 11). Simply pull the cutting
element straight off (Fig. 12) and insert the
precision trimmer (Fig. 13).
Precision trimming without comb
You can use the precision trimmer to create fine
lines and contours around your facial style, close
to the skin.
1 Remove the cutting element (Fig. 12) and attach
the precision trimmer (Fig. 13).
2 Switch on the appliance.
3 Hold the precision trimmer perpendicular to the
skin and move the precision trimmer upwards
or downwards with gentle pressure (Fig. 11).
4 Switch off the appliance and clean it after use.
Trimming with comb
Note: When you trim for the first time, start at the
highest length setting to familiarize yourself with
the appliance.
- You can use the beard and stubble comb
attached to the cutting element to groom your
beard and moustache in your preferred style.
For the beard and stubble comb, you can turn
the zoom wheel to choose from 20 length
settings ranging from 0.5mm to 10mm in steps
of 0.5mm (Fig. 6).
- You can use the precision trimmer with a detail
comb attached for precision trimming of your
sideburns, moustache or beard (Fig. 15). This
appliance comes with 2 different detail combs:
5mm (L) and 3mm (M).
1 Attach the detail comb (Fig. 14) or the beard
and stubble comb onto the appliance (Fig. 16).
2 Switch on the appliance.
3 To trim most effectively, move the appliance
against the hair growth direction (Fig. 17). Make
sure that the surface of the comb always stays
in contact with the skin.
Cleaning and maintenance
Cleaning the appliance
Note: Only the cutting element and the comb can
be cleaned with water.
We advise you to empty the hair-collection
chamber after each trimming session. When you
trim long, dense beards, it may also be necessary
to empty the hair-collection chamber during the
trimming session in order to maintain optimal
suction performance.
1 Switch off the appliance and disconnect it from
the wall socket.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb (Fig. 18) and clean it with the
cleaning brush and/or rinse it under the tap
(Fig. 19).
4 Remove the cutting element and clean it under
the tap (Fig. 20). Carefully shake off excess
water and let the cutting element air-dry
completely.
Caution: Never dry the cutting element with a
towel or tissue, as this may damage the trimming
teeth.
5 Shake out the hairs that have collected in the
hair chamber.
6 Brush out the hairs with the cleaning brush (Fig.
21) or cleaning sponge (Fig. 22) supplied.
7 After cleaning, reattach the cutting element (Fig.
23) and comb (Fig. 16) to the appliance.
Produktspezifikationen
| Marke: | Philips |
| Kategorie: | Bartschneider |
| Modell: | Series 7000 BT7220 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Philips Series 7000 BT7220 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bartschneider Philips
11 September 2024
8 September 2024
4 September 2024
4 September 2024
1 September 2024
1 September 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
Bedienungsanleitung Bartschneider
- Bartschneider Sinbo
- Bartschneider Clatronic
- Bartschneider Domo
- Bartschneider Emerio
- Bartschneider G3 Ferrari
- Bartschneider Coline
- Bartschneider Tristar
- Bartschneider SilverCrest
- Bartschneider Panasonic
- Bartschneider Adler
- Bartschneider Beper
- Bartschneider Bestron
- Bartschneider Princess
- Bartschneider Trisa
- Bartschneider AEG
- Bartschneider Concept
- Bartschneider Fagor
- Bartschneider Jata
- Bartschneider Koenic
- Bartschneider Severin
- Bartschneider Teesa
- Bartschneider Unold
- Bartschneider Bomann
- Bartschneider Melissa
- Bartschneider Taurus
- Bartschneider Beurer
- Bartschneider ECG
- Bartschneider Arzum
- Bartschneider Braun
- Bartschneider Eldom
- Bartschneider Eta
- Bartschneider Grundig
- Bartschneider Home Electric
- Bartschneider Solac
- Bartschneider Trebs
- Bartschneider Alpina
- Bartschneider Hyundai
- Bartschneider Orava
- Bartschneider Livoo
- Bartschneider DCG
- Bartschneider ProfiCare
- Bartschneider Lanaform
- Bartschneider Rowenta
- Bartschneider Sencor
- Bartschneider Maxwell
- Bartschneider Efbe-Schott
- Bartschneider Scarlett
- Bartschneider BaByliss
- Bartschneider Carmen
- Bartschneider Remington
- Bartschneider GA.MA
- Bartschneider Termozeta
- Bartschneider Valera
- Bartschneider Wahl
- Bartschneider Stihl
- Bartschneider Imetec
- Bartschneider Andis
- Bartschneider Moser
- Bartschneider Zelmer
- Bartschneider Innoliving
- Bartschneider Vitek
- Bartschneider Aurora
- Bartschneider Orbegozo
- Bartschneider Izzy
- Bartschneider Ferrari
- Bartschneider Becken
- Bartschneider Girmi
- Bartschneider Conair
- Bartschneider VS Sassoon
- Bartschneider Steamery
- Bartschneider Mybeo
Neueste Bedienungsanleitung für -Kategorien-
7 Oktober 2024
5 Oktober 2024
3 Oktober 2024
29 September 2024
29 September 2024
28 September 2024
21 September 2024
11 September 2024
11 September 2024
11 September 2024