Philips Series 3000 HC3100 Bedienungsanleitung

Philips Bartschneider Series 3000 HC3100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips Series 3000 HC3100 (19 Seiten) in der Kategorie Bartschneider. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/19

HC5100 / HC3100

4222.002.8285.2 (23/1/2018)

>75% recycled paper

>75% papier recyclé

English

General Description (Fig. 1)

1 Protection cap (HC5100 only)

2 Cutting unit (cutter and guard)

3 Screws

4 Adjustment lever

5 On/off-switch

6 Click-on combs

7 Hair comb (HC5100 only)

8 Scissors (HC5100 only)

9 Cleaning brush

10 Clipper oil

Note: cord and plug not shown.

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the appliance and the

mains cord dry (Fig. 2).

Warning

- This symbol means that the

appliance is double-insulated

(Fig. 3).

- This appliance can be used

by children aged from 8 years

and above and persons with

reduced physical, sensory or

mental capabilities or lack of

experience and knowledge if

they have been given

supervision or instruction

concerning use of the

appliance in a safe way and

understand the hazards

involved. Children shall not

play with the appliance.

Cleaning and user

maintenance shall not be

made by children without

supervision.

- If the mains cord is damaged,

you must have it replaced by

Philips, a service center

authorized by Philips or

similarly qualified persons in

order to avoid a hazard.

- Always check the appliance

before you use it. Do not use

the appliance if it is damaged,

as this may cause injury.

Always replace a damaged

part with one of the original

type.

Caution

- Only use this appliance for its

intended purpose as shown

in the user manual.

1098

9mm 12mm

16mm

25mm

3mm 6mm

19mm

HC5100

- For hygienic reasons, the

appliance should only be

used by one person.

- Never use compressed air,

scouring pads, abrasive

cleaning agents or aggressive

liquids such as petrol or

acetone to clean the

appliance.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

General

- The appliance is suitable for mains voltages

ranging from 220 to 240 volts.

Using the appliance

Note: Make sure your hair is clean and dry. Do not

use the appliance on freshly washed hair.

Tips & tricks

- To clip in the most effective way, move the

appliance against the direction of hair growth.

- Since hair grows in different directions, you

need to move the appliance in different

directions (upwards, downwards or across).

- Make overlapping passes over the head to

ensure that the appliance catches all hairs that

need to be cut.

- Make sure that the flat part of the hair clipping

comb is fully in contact with the scalp to obtain

an even clipping result.

- If you wish to shape contours, tilt the appliance.

- Regularly remove cut hair from the hair clipping

comb. If a lot of hair has accumulated in the

comb, remove it from the appliance and blow

and/or shake the hair out of it.

Detaching and attaching click-on combs

1 To detach a comb from the cutting element,

push the hook at the back of the comb

upwards, then unhook it at the front (Fig. 4).

2 To attach a comb onto the cutting element,

hook it onto the front of the cutting element

and push it down at the back ('click') (Fig. 5).

Preparing for use

Use the adjustment lever on the left side of the

appliance to set the desired hair length. Move the

adjustment lever upwards to reduce the cutting

length and move it downwards to increase the

cutting length. When you hear a click, you have

reached the next length setting (Fig. 6).

Switching the appliance on and off

1 To switch on the appliance, push the on/off-

slide upwards (Fig. 7).

2 To switch off the appliance, push the on/off-

slide downwards (Fig. 7).

Clipping with click-on comb

1 Place the desired comb onto the appliance

(‘click’) (Fig. 5).

2 Switch on the appliance (Fig. 7).

3 Place the comb on the scalp and move the

appliance through the hair slowly.

Comb sizes

Comb sizes in mm Comb sizes in inches

3 1/8

6 1/4

9 3/8

12 1/2

16 (HC5100 only) 5/8 (HC5100 only)

19 (HC5100 only) 3/4 (HC5100 only)

25 (HC5100 only) 1 (HC5100 only)

Clipping without click-on comb

You can use the appliance without click-on comb

to clip your hair very close to the skin or to shape

specific areas.

1 Detach the click-on comb (Fig. 4).

2 Switch on the appliance (Fig. 7).

3 To obtain an even clipping result, place the

appliance flat on the skin. Move the appliance

slowly and smoothly.

Shaping

1 Detach the click-on comb (Fig. 4).

2 Switch on the appliance (Fig. 7).

3 To shape contours, turn the appliance and

make downward strokes. Move the appliance

slowly and smoothly.

Cleaning and maintenance

Warning: Keep the appliance and the mains cord

dry. Only clean the appliance and the mains cord

with the cleaning brush supplied.

Caution: Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive liquids

such as alcohol, petrol or acetone to clean the

appliance.

Caution: Do not use any sharp objects to clean the

appliance.

Clean the appliance after every use.

1 Make sure the appliance is switched off and

disconnected from the mains.

2 Detach the click-on comb (Fig. 4).

3 Clean the cutting unit (Fig. 8) and the click-on

comb (Fig. 9) with the cleaning brush supplied.

4 For optimal clipping performance, lubricate the

cutter frequently with clipper oil (Fig. 10).

Produktspezifikationen

Marke:	Philips
Kategorie:	Bartschneider
Modell:	Series 3000 HC3100
Form:	Rechteck
Produktfarbe:	Grau
Energiequelle:	AC
Kabellänge:	2.4 m
Betriebsdauer:	- min
Material Messer:	Stahl
Reinigungsbürste:	Ja
Wiederaufladbar:	Nein
Öl enthalten:	Ja
Anzahl der Kämme:	4
geeignet für den ganzen Körper:	Nein
Maximum Haarlänge:	- mm
Minimum Haarlänge:	- mm
Kammaufsatz:	Ja
Schnittbreite:	41 mm
Zusatzkämme:	Bart