Philips BT5511 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips BT5511 (8 Seiten) in der Kategorie Bartschneider. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
BT5511
© 2021 Koninklijke Philips N.V.
All rights reserved
Tous droits réservés
3000.074.4075.1 (9/8/2021)
2
3
4
5
0.4mm
6
7
0.4
10.0
8
9
10
11
12
13
10.4
20.0
14
15
16
17
18
19
20
1
2
21
>75 % recycled paper
>75 % papier recyclé
English
Danger
- Keep the supply unit dry (Fig. 2).
Warning
- To charge the battery, only use the detachable
supply unit (HQ8505) provided with the
appliance.
- The supply unit contains a transformer. Do not
cut off the supply unit to replace it with another
plug, as this causes a hazardous situation.
- This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by
children without supervision.
- Always unplug the appliance before you clean it
under the tap.
- Always check the appliance before you use it.
Do not use the appliance if it is damaged, as
this may cause injury. Always replace a
damaged part with one of the original type.
- This appliance contains batteries that are non-
replaceable.
- Do not open the appliance to replace the
rechargeable battery.
Caution
- Never immerse the charging stand in water and
do not rinse it under the tap (Fig. 2).
- Never immerse the appliance in water. Do not
use the appliance in the bath or shower.
- Never use water hotter than 60 °C to rinse the
appliance.
- Only use this appliance for its intended purpose
as shown in the user manual.
- For hygienic reasons, the appliance should only
be used by one person.
- Do not use the supply unit in or near wall
sockets that contain an electric air freshener to
prevent irreparable damage to the supply unit.
- Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
General
- This appliance can be safely cleaned under the
tap (Fig. 3).
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
General description (Fig. 1)
1 Cutting unit
2 Zoom wheel
3 On/off switch
4 Battery charge indicator
5 Power plug
6 Small plug
7 Beard and stubble comb
8 Long hair comb
9 Short hair comb
Not shown: cleaning brush
Charging
Battery status indicator
- When the battery is almost empty, the battery
charge indicator flashes orange.
- When the product is charging, the battery
charge indicator flashes white.
- When the product is fully charged, the battery
charge indicator lights up white continuously.
4 5
6
3
2
7
89
1
1
Note: After approx. 30 minutes, the light goes out
automatically.
Charging with the power cord
Charge the product fully before you use it for the
first time and after a long period of disuse.
- Charging or using the product at temperatures
below 5°C (40°F) or higher than 35°C (95°F)
adversely affects the lifespan of the battery.
- If the product is subjected to a major change in
temperature, pressure or humidity, let the
product acclimatize for 30 minutes before use.
It takes approximately 1 hour to fully charge the
product. When it is fully charged, the product has a
cordless operating time of up to 100 minutes.
1 Make sure the product is turned off.
2 Insert the small plug into the product and put
the power plug in any 120V AC outlet (Fig. 4).
3 After charging, remove the power plug from the
wall outlet and pull the small plug out of the
product.
Note: An adapter plug may be necessary for cord
usage in some foreign countries. Use an
attachment plug adapter of the proper
configuration for the power outlet.
Using the product
Always check the product and all accessories
before using. Do not use the product or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with
one of the original type.
- Use this product for its intended household use
as described in this manual.
- For hygienic reasons, the product should only
be used by one person.
- Note: This appliance can be used without cord
or when it is connected to the wall socket (Fig.
5).
Turning the product on and off
- Press the on/off button once to turn the
product on or off (Fig. 6).
Beard trimming
Trimming with guard
Note: When you trim for the first time, start at a
length setting that is longer than what you are
used to, to familiarize yourself with the product.
This product comes with one beard and stubble
guard.
- Use the trimming guard attached to the cutting
element to trim your beard, stubble and
mustache in your preferred style. Turn the zoom
wheel to choose from 10 length settings ranging
from 0.4mm (1/64 in.) to 10mm (25/64 in.) (Fig.
8). The length settings are mentioned at the
back of the guards.
1 Make sure the product is turned off.
2 Slide the guard into the guiding grooves on
both sides of the product ('click’) (Fig. 7).
3 Turn the zoom wheel to select the desired
length setting (Fig. 8). The selected length
setting is shown on the front of the handle. For
the beard and stubble guard: the silver color
refers to length settings ranging from 0.4mm
(1/64 in.) to 10mm (25/64 in) (Fig. 8).
4 Turn on the product (Fig. 9).
5 To trim most effectively, move the product
against the hair growth direction. Make sure
that the surface of the guard always stays in
contact with the skin (Fig. 10).
Since all hairs do not grow in the same
direction, you may want to try different
trimming directions (i.e. upwards, downwards,
or across). Practice is best for optimum results.
6 If a lot of hair has accumulated in the guard,
remove it from the product and blow and/or
shake out the hairs. Regularly remove cut hair
from the guard. The selected hair length setting
does not change when the guard is removed.
7 Turn off and clean the product after each use
(see 'Cleaning').
Trimming without guard
If you trim without the guard (0.4mm or 1/64 in.),
your hair is cut close to the skin. You can use the
trimming head without the guard to:
- Define hair line
- Trim nape of neck
- Remove single unwanted hairs
1 Make sure the product is turned off.
2 Pull the comb off the product (Fig. 11).
- Never pull at the flexible top of the comb.
Always pull at the sides.
3 Turn on the product.
4 Make well-controlled movements. Touch the
hair lightly with the trimmer.
- For a comfortable trim close to your skin,
place the flat side of the trimming head
against your skin and make strokes in the
desired direction (Fig. 12).
- For contouring, hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards with
gentle pressure (Fig. 13).
5 Turn off and clean the product after each use
(see 'Cleaning').
Hair clipping
- For best results, use the product on clean, dry
hair. Do not use it on freshly washed hair.
- Before you start clipping, comb the hair in the
direction of hair growth.
- When you trim for the first time, start at the
highest length setting to familiarize yourself
with the product.
- To achieve optimal clipping results, always
move the product slowly through the hair
against the direction of hair growth.
1 Make sure the product is turned off.
2 Slide the comb into the guiding grooves on
both sides of the product ('click’) (Fig. 7).


Produktspezifikationen

Marke: Philips
Kategorie: Bartschneider
Modell: BT5511
Wasserfest: Ja
Produktfarbe: Schwarz
Akku-/Batterietyp: Integrierte Batterie
Akku-/Batterietechnologie: Lithium-Ion (Li-Ion)
Energiequelle: Wechselstrom/Batterie
AC Eingangsspannung: 100-240 V
Akku: Ja
Betriebsdauer: 90 min
Drahtlos: Ja
Material Messer: Stahl
Waschbar: Ja
Anzahl der Längenschritte: 40
geeignet für den ganzen Körper: Nein
Maximum Haarlänge: 20 mm
Minimum Haarlänge: 0.2 mm

Brauchst du Hilfe?

Wenn Sie Hilfe mit Philips BT5511 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bartschneider Philips

Bedienungsanleitung Bartschneider

Neueste Bedienungsanleitung für -Kategorien-