Parkside PAT 4 C3 Bedienungsanleitung

Parkside Nicht kategorisiert PAT 4 C3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Parkside PAT 4 C3 (119 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/119

CORDLESS NAILER / STAPLER PAT 4 C3

IAN 304116

CORDLESS NAILER / STAPLER

Translation of the original instructions

BATTERIDREVET HÆFTEPISTOL

Original driftvejledning

ACCU-NIETPISTOOL

Vertaling van de oorspronkelijke

gebruiksaanwijzing

AKKU-TACKER

Originalbetriebsanleitung

AGRAFEUSE SANS FIL

Traduction des instructions d‘origine

GB / IE / NI Translation of the

original instructions Page 5

DK Original driftvejledning Side 26

FR / BE Traduction des instructions d‘origine Page 48

NL / BE Vertaling van de oorspronkelijke

gebruiksaanwijzing Pagina 71

DE / AT / CH Originalbetriebsanleitung Seite 94

A3 a3

3 a

6 3 3 a

5 4

7 7 a

5 GB/IE/NI

List of pictograms used ............................................ Page 6

Introduction ....................................................................... Page 7

Intended use ............................................................................ Page 7

Parts description ...................................................................... Page 7

Scope of delivery .................................................................... Page 8

Technical data ......................................................................... Page 8

General power tools safety warnings ....... Page 10

Tacker safety warnings ........................................................... Page 14

Charger safety warnings ........................................................ Page 15

Before use ........................................................................... Page 16

Starting the charging process ................................................. Page 17

Completing the charging process .......................................... Page 17

Initial use ............................................................................. Page 17

Adding Staples ........................................................................ Page 17

Adding Nails ........................................................................... Page 18

Functions ..............................................................................Page 18

Cleaning and care ........................................................ Page 20

Disposal ................................................................................ Page 20

Service ................................................................................... Page 22

Warranty claim procedure ..................................................... Page 22

Service ..................................................................................... Page 23

Warranty ............................................................................. Page 23

Translation of original

conformity declaration ............................................ Page 24

6 GB/IE/NI

List of pictograms used

Read the instruction manual.

Wear eye protection.

Wear hearing protection.

Wear protective, slip-resistant footwear.

Wear protective gloves.

Please read the instructions for use. The instructions for

use contain additional information.

For use in dry indoor locations only.

Protection class II (double insulation)

Protect the product from moisture.

7 GB/IE/NI

Cordless Nailer / Stapler PAT 4 C3

Introduction

We congratulate you on the purchase of your new product.

You have chosen a high quality product. The instructions

for use are part of the product. They contain important infor-

mation concerning safety, use and disposal. Before using the product,

please familiarise yourself with all of the safety information and instruc-

tions for use. Only use the product as described and for the speciﬁed

applications. If you pass the product on to anyone else, please ensure

that you also pass on all the documentation with it.

Intended use

This product is intended for fastening paperboard, sheets of paper,

leather, insulation, fabric and similar materials onto soft wood (real wood),

plywood boards having similar hardness as softwood and low density

ﬁberboard. It is only intended for private household use. Any other use

or modiﬁcation of the product shall be considered improper use and

may result in serious accident hazards. The manufacturer is not liable

for any damages caused by improper use. Not intended for commercial

use. This product is not intended for securing electrical cables.

Parts description

1 Trigger

2 Micro-USB charging socket

3 Pusher

3 a Release button

4 Magazine

5 Fill indicator (staples)

6 Safety contact

8 GB/IE/NI

7 Charger

7 a USB cable

8 On / Oﬀ switch

9 Charge indicator

Scope of delivery

1 Cordless Nailer / Stapler PAT 4 C3

1 Charger

1000 Staples 6 mm

1000 Staples 8 mm

500 Nails 10 mm

1 Operating instructions

Technical data

Cordless stapler: PAT 4 C3

Rated voltage: 4 V (direct current)

Rechargeable

battery (installed): LITHIUM-ION

Cells: 1

Capacity: 1500 mAh

Speed: Max. 30 / min

Magazine capacity: 100 staples or 50 nails

Wire staples:

4-10

5/32-3/8 in

Type 53 / JT21

Staple width: 11.4 mm

Staple length: 4–10 mm

Nails: Nail width: 1.2 mm

6-10

1/4-3/8 in

Type 47 /

18-Gauge

Nail length: 6–10 mm

9 GB/IE/NI

Battery charger: HG04133

Input:

Rated voltage: 100–240 V∼, 50 / 60 Hz

Rated current: 0.2 A

Connection type: USB

Output:

Rated voltage: 5 V (direct current)

Rated current: 600 mA

Output power: max. 3 W

Charging time: approx. 180 min

Protection class: II / (double insulation)

Noise emission value:

The measured values for sound comply with EN 60745. The A-weighted

single-event noise level, standardised to 1 s, is typically:

Sound pressure level: L = 80.6 dB(A)

Uncertainty: K = 3 dB(A)

Sound power level: L = 91.6 dB(A)

Uncertainty: K = 3 dB(A)

Wear hearing protection!

Vibration values determined in accordance with

EN 60745:

Vibration emission value ahw

= 2.75 m / s2

Uncertainty K = 1,5 m / s2

Note: The vibration level speciﬁed in these instructions has been

measured in accordance with a standardized measuring procedure

speciﬁed in EN60745 and can be use for equipment comparisons.

11 GB/IE/NI

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

Electrical safety

a) Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs

with earthed (grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfa

ces,

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed

or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carry-

ing, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suitable

for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

Personal safety

a) Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the influence

of drugs, alcohol or medication. A moment of inattention

while operating power tools may result in serious personal injury.

12 GB/IE/NI

b) Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in

the off-position before connecting to power source

and / or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or energising

power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a rotat-

ing part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in unex-

pected situations.

f) Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can

reduce dust-related hazards.

Power tool use and care

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

14 GB/IE/NI

c) When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a ﬁre.

d) Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occ

urs,

flush with water. If liquid contacts eyes, additionally seek medi-

cal help. Liquid ejected from the battery may cause irritation or burns.

Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Tacker safety warnings

1. Always assume that the tool contains fasteners. Careless

handling of the tacker can result in unexpected ﬁring of fasteners

and personal injury.

2. D

o not point the tool towards yourself or anyone n

earby.

Unexpected triggering will discharge the fastener causing an injury.

3. Do not actuate the tool unless the tool is placed firmly

against the workpiece. If the tool is not in contact with the

workpiece, the fastener may be deﬂected away from your target.

4. Disconnect the tool from the power source when the

fastener jams in the tool. While removing a jammed fastener,

the tacker may be accidentally activated if it is plugged in.

5. Use caution while removing a jammed fastener. The

mechanism may be under compression and the fastener may be

forcefully discharged while attempting to free a jammed condition.

Produktspezifikationen

Marke:	Parkside
Kategorie:	Nicht kategorisiert
Modell:	PAT 4 C3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Parkside PAT 4 C3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Nicht kategorisiert Parkside

Parkside IAN 327414 Bedienungsanleitung

3 Dezember 2024

Parkside PZM 2 A1 Bedienungsanleitung

3 Dezember 2024

Parkside WWS-GLK9-Y02 Bedienungsanleitung

3 Dezember 2024

Parkside PWSZS 1 Bedienungsanleitung

3 Dezember 2024

Parkside PLSS 2 A1 Bedienungsanleitung

3 Oktober 2024

Parkside PWZS 2 A1 Bedienungsanleitung

23 September 2024

Parkside PSMW 1 A1 Bedienungsanleitung

17 September 2024

Parkside PMH 2400 B2 Bedienungsanleitung

13 September 2024

Parkside PASS 50 A1 Bedienungsanleitung

10 September 2024

Parkside PDWS 8 A1 Bedienungsanleitung

8 September 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

BEKO BBVM17400B Bedienungsanleitung

4 Dezember 2024

DeWalt DXV34PTA Bedienungsanleitung

4 Dezember 2024

DeWalt DCF414 Bedienungsanleitung

4 Dezember 2024

DeWalt DXIRFFP25 Bedienungsanleitung

4 Dezember 2024

DeWalt DXIR1A1A2P3 Bedienungsanleitung

4 Dezember 2024

DeWalt DCE450 Bedienungsanleitung

4 Dezember 2024

DeWalt DCMAS5713 Bedienungsanleitung

4 Dezember 2024

DeWalt DCMASBC1 Bedienungsanleitung

4 Dezember 2024

DeWalt DXKH180E Bedienungsanleitung

4 Dezember 2024

DeWalt DWE46150 Bedienungsanleitung

4 Dezember 2024