Panduit FXTRL8NUHSNM002 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Panduit FXTRL8NUHSNM002 (2 Seiten) in der Kategorie Kabel für PCs und Peripheriegeräte. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2013 FS046A
Page 1 of 2
Tak-Ty Option
Ta k-Ty
Slot features in the cable transition allows for the use of a Tak-Ty
to either secure the cable harness to a rack feature, such as
cable management fingers, or to more robustly secure multiple
cable transitions that are interlocked together.
PanMPO to LC Uniboot
Cable Harness (Hydra)
3.0mm round cable clips
3.0mm round cable
Housing ribs
(Transitions interlocked)
(Cable secured in clip)
Cable management example
Cable Clips & Housing Ribs Option
Cable Transition Usage
LC Uniboot PanMPO
Connectors Connector
Cable transition
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2013 FS046A
www.panduit.com
Page 2 of 2
LC Uniboot Polarity Changeover - Pair Flipping
1
2
3
4
Squeeze both sides of the LC Uniboot cover evenly and
pull back to disengage the tab on the opposite side.
Slide the LC Uniboot cover back away from connectors and
rotate 180°.
Rotate each LC connector downward 180°. Re-install the LC Uniboot cover until you hear an audible click.
PanMPO Gender Changeover
Squeeze both sides of the outer housing at the back end evenly
until you hear an audible click. Pull off connector to remove.
Locate hole in the inner housing on the slotted side and position
pin retraction tool over the hole.
Insert tool into hole, press down gently, and push backward to
retract connector pins to the female state. Repeat process in
opposite direction to extract pins for male state.
Re-install the outer housing. Ensure the key is in the proper
orientation. See PanMPO polarity changeover instructions on
page 2 of FS041* for more details.
4
3Female = Pins retracted
Pins
retracted
Gently
CAUTION! Only Panduit tool is to be
used for gender change. Use of any
other tool can cause fiber damage and
will void the product warranty.
Pin retraction
tool
Hole
2
Pins
extracted
1
Outer
housing
Male = Pins extracted
*Denotes instruction sheet revision letter.


Produktspezifikationen

Marke: Panduit
Kategorie: Kabel für PCs und Peripheriegeräte
Modell: FXTRL8NUHSNM002

Brauchst du Hilfe?

Wenn Sie Hilfe mit Panduit FXTRL8NUHSNM002 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kabel für PCs und Peripheriegeräte Panduit

Bedienungsanleitung Kabel für PCs und Peripheriegeräte

Neueste Bedienungsanleitung für -Kategorien-