Panasonic PT-LB2U Bedienungsanleitung

Panasonic Videostrahl PT-LB2U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Panasonic PT-LB2U (62 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/62

PT-LB2U

PT-LB1U

Thank you for purchasing a Panasonic Projector.

Before operating this product, please read the instructions carefully, and save this manual 

for future use.

Before using your projector, be sure to read “Precautions with regard to safety”

(pages 5 to 9).

For network operation, please read the Network Operation Manual. 

ENGLISH

TQBJ0322-1

AUTO

SETUP

MENU RETURN

EN RTE

FREEZE

MUTE

COMPUTER

V EOID

DEFAULT

FUNCTION

WIN.

INDEX-

DIGITAL ZOOM

VOLUME

Operating Instructions

Basic Manual

LCD Projector Commercial Use

Model No.

Essential information



ENGLISH

Important Safety Notice

Dear Panasonic Customer:

The following information should be read and understood as it provides details, which will enable you to operate

the projector in a manner which is both safe to you and your environment, and conforms to legal requirements

regarding the use of projectors. Keep this booklet with your Panasonic LCD projector for future reference. The

serial number of your product may be found on its bottom. Write it in the space provided below and retain this

booklet in case service is required.

Model number: PT-LB2U/PT-LB1U

Serial number:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

Power Supply: This LCD Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current

only.

CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power

supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will need to

obtain a separate 250 V power cord. If you use the accessory cord in such situations, re may result.

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of

sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

CAUTION: This equipment is equipped with a three-pin grounding-type power plug.

Do not remove the grounding pin on the power plug. This plug will only t

a grounding-type power outlet. This is a safety feature. If you are unable

to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug. Do not remove

Pursuant to at the directive 2004/108/EC, article 9(2)

Pursuant to at the directive 2005/32/EC amended by 2008/28/EC, article 14

Panasonic Testing Center

Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, F.R. Germany

NOTICE:

This product has a High Intensity Discharge (HID) lamp that contains mercury. Dispose may be regulated in your

community due to environmental considerations. For disposal or recycling information, please contact your local

authorities, or the Electronic Industries Alliance: http://www.eiae.org

Essential information

ENGLISH



Important Safety Notice (continued)

WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•

Consult the dealer or an experienced radio/TV technician for help.•

FCC CAUTION: To assure continued compliance, follow the attached installation instructions and use only

shielded interface cables when connecting to computer and/or peripheral devices.

Any changes or modications not expressly approved by Panasonic Corp. of North America

could void the user’s authority to operate this device.

WARNING:

Not for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data •

Processing Equipment, ANSI/NFPA 75.

For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the •

building installation wiring.

For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily •

accessible.

Declaration of Conformity

Model Number: PT-LB2U/PT-LB1U

Trade Name: Panasonic

Responsible party: Panasonic Solutions Company

Address: 3 Panasonic Way, Secaucus, NJ 07094

Telephone number: (877) 803 - 8492

E-mail: projectorsupport@us.panasonic.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Information on Disposal in other Countries outside the European

These symbols are only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the

correct method of disposal.

Environment care information for users in China

This symbol is only valid in China.

Produktspezifikationen

Marke:	Panasonic
Kategorie:	Videostrahl
Modell:	PT-LB2U
Bildschirmdiagonale:	0.63 "
Eingebaute Lautsprecher:	Ja
WLAN:	Nein
Gewicht:	2300 g
Produktfarbe:	Weiß
RMS-Leistung:	1 W
Anzahl eingebauter Lautsprecher:	1
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Fernbedienung enthalten:	Ja
Display:	LCD
Stromverbrauch (Standardbetrieb):	300 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Kontrastverhältnis:	500:1
Stromverbrauch (Standby):	18 W
Temperaturbereich bei Lagerung:	0 - 40 °C
Luftfeuchtigkeit bei Lagerung:	20 - 80 %
Geräuschpegel:	- dB
Analoges Signalformatsystem:	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
RS-232 port:	1
Audioeingang (L, R):	1
Komponenteneingang Video (YPbPr/YCbCr):	2
Unterstützte Video-Modi:	1080i, 1080p, 480i, 480p, 576i, 576p, 720i, 720p
3D:	Nein
DVI Anschluss:	Nein
Lampentyp:	UHM
Full-HD:	Nein
Zoom-Fähigkeit:	Ja
Abmessungen (BxTxH):	307 x 210 x 69 mm
Projektorhelligkeit:	2600 ANSI Lumen
Projektionstechnologie:	LCD
native Auflösung des Projektors:	XGA (1024x768)
Trapezkorrektur, vertikal:	30 °
Projektionsflächenkapazität:	33 - 300 "
Projektionsabstand:	- m
Fokus:	Manuell
Anzahl VGA (D-Sub) Anschlüsse:	3
Serielle Schnittstelle:	RS-232
Seitenverhältnis:	4:3
Audioanschlüsse:	1
Lebensdauer der Lichtquelle:	5000 h
Lampenleistung:	220 W
Typ der Lichtquelle:	Lampe
Brennweitenbereich:	1.64 - 1.87 mm
Anzahl S-Video-Eingänge:	1
Geräuschpegel (Energiesparmodus):	29 dB
Audioausgang:	1
Zoomtyp:	Manuell
Ethernet/LAN:	Ja