PAC LocPro Advanced LPA1.4 Bedienungsanleitung

PAC Audio/Video-Konverter LocPro Advanced LPA1.4

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für PAC LocPro Advanced LPA1.4 (8 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
C
Rev.7
1/5/2022
LPH Harness Instruction Guide
®
Wiring Connection Chart (All Models)
MODELS:
• LPA-E4
• LPA2.4 / LPA2.2
• LPA1.4 / LPA1.2
Important Note: This harness is provided
with a inline fuse installed. Please remove
prior to install and reinsert once îš¿nished.
If your vehicle does not provide ACC
source your harness will not have a
"RED" wire to connect.
It will use DC O󰀨set to turn on as well
as trigger the "REM OUT" on the LPA.
On LPA-E4 there will be a jumper that
you can move based on your application.
This harness is designed to work on
OEM NON-AMPLIFIED systems.
Connect the RED BUTT Connector to
the aftermarket system turn on for your
ampliîš¿ers.
Fully open terminals
before inserting wire.
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
C
Rev.7
1/5/2022
LPH Harness Instruction Guide
®
Example Installation - 4-Channel Ampliîš¿er - (HARNESS CUT REQUIRED)
Example Installation - Mono Ampliîš¿er - (HARNESS CUT NOT REQUIRED)
RCA FROM LPA
"CUT HERE
AND INSULATE"
• Cut the harness close as possible to the
"CUT HERE AND INSULATE" label. You
must insulate wires to prevent damage to
OEM radio.
• The cut speaker wires will need to be
connected to your aftermarket ampliîš¿er.
(REFER TO LABEL ON HARNESS)
• Please refer to the chart on the rst page
for wiring your loose wires to your LPA.
• This harness is designed to work on OEM
NON-AMPLIFIED systems.
OEM RADIO HARNESS
LPH TO RADIO CONNECTION
LOOSE WIRES TO LPA
REM OUT FROM LPA
DO NOT CUT!!
• If using a 2-Channel input LPA
use the front speaker wires
and insulate the remaining rear
speaker wires.
• DO NOT CUT the speaker wires
inbetween the "CUT HERE"
Lables in order to keep the
factory speakers functional.
• This harness is designed to
work on OEM NON-AMPLIFIED
systems.
OEM RADIO HARNESS
LOOSE WIRES TO LPA
"CUT HERE AND
INSULATE"
"CUT HERE AND CONNECT TO
AFTERMARKET AMPLIFIER"
LPH TO RADIO CONNECTION
RCA FROM LPA
REM OUT FROM LPA
AFTERMARKET AMPLIFIER
AFTERMARKET AMPLIFIER
"CUT HERE AND CONNECT TO
AFTERMARKET AMPLIFIER"
(CUT SPEAKER WIRES)
©2018 AAMP Global • All Rights Reserved.
ANC vs Amplifier
ANC Module
Amplifier
Actually silver in the vehicle Actually black in the vehicle

Produktspezifikationen

Marke: PAC
Kategorie: Audio/Video-Konverter
Modell: LocPro Advanced LPA1.4

Brauchst du Hilfe?

Wenn Sie Hilfe mit PAC LocPro Advanced LPA1.4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Audio/Video-Konverter PAC

PAC

PAC LocPro Advanced LPA-E.4 Bedienungsanleitung

11 August 2024
PAC

PAC LocPro Advanced LPA1.2 Bedienungsanleitung

9 August 2024
PAC

PAC LocPro Advanced LPA1.4 Bedienungsanleitung

7 August 2024
PAC

PAC LocPro Advanced LPA-2.4 Bedienungsanleitung

6 August 2024
PAC

PAC LocPro Advanced LPA-2.2 Bedienungsanleitung

23 November 2023

Bedienungsanleitung Audio/Video-Konverter

Neueste Bedienungsanleitung für -Kategorien-

Abus

Abus TVAC20001 Bedienungsanleitung

11 Oktober 2024
Cambridge

Cambridge DacMagic Bedienungsanleitung

4 Oktober 2024
König

König KN-HDMICON26 Bedienungsanleitung

2 Oktober 2024
LevelOne

LevelOne GVM-1101 Bedienungsanleitung

30 September 2024
StarTech.com

StarTech.com VS123HD Bedienungsanleitung

26 September 2024
StarTech.com

StarTech.com VS421HDDP Bedienungsanleitung

26 September 2024
StarTech.com

StarTech.com ST228MX Bedienungsanleitung

26 September 2024
StarTech.com

StarTech.com HDMI2DVI Bedienungsanleitung

26 September 2024
StarTech.com

StarTech.com VGANTSCPRO Bedienungsanleitung

26 September 2024
StarTech.com

StarTech.com CPNT2VGAA Bedienungsanleitung

26 September 2024