PAC LocPro Advanced LPA-2.4 Bedienungsanleitung

PAC Audio/Video-Konverter LocPro Advanced LPA-2.4

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für PAC LocPro Advanced LPA-2.4 (3 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

12V

Connect to a fused

+12V constant source

GND

Connect to a good

chassis ground

REM IN

Remote turn on input (+)

REM OUT

Remote turn on output (+)

The LPA will provide a

+12V Remote Output using

DC Signal Sense from the

Right channel inputs

SPEAKER SIGNAL INPUTS

Connect to head unit or

RCA SIGNAL OUTPUTS

GROUND ISOLATION

Selectable: GND / ISO / 200Ω

Default: ISO

If ground / engine noise is present,

the jumper can be repositioned

GAIN

Variable: -28dB -+1dB

Allows gain adjustment of

the output signal

LPF

Low Pass Filter

Allows 250Hz low pass

filter for Rear Channels

BOOST

Variable: 0dB — 12dB

When LPF is ON, provides

Bass Boost (45Hz) for

Rear Channels

CLIP

Indicates signal clipping when

gain is set to high

REMOTE

Optional Re ote Level Com n-

trol Knob (LPA-R r EM) for Rea

Chan eln s

LOAD SELECT

Selectable: 20Ω / 60Ω / 20kΩ

Default: 20kΩ

For factory audio systems

requiring a resistance load to

output audio, select 60Ω first,

then 20Ω. All others use 20kΩ

setting

LPA-2.2 | 2 Channel Line-Ou put Convt erter

LPA-2.4 | 4 Channel Line-Ou put Convt erter

Selectable Ground Isolation and Load Select features ensu e a pur re, noise-f ee signal for any type of audio systemr .

This Quick Start Guide will get you going, but if you need additional help or information, please visit our website or

contact Tec ical ppohn Su rt.

Features & Wiring Information

Quick Start Guide

FULLY OPEN TERMINALS

BEFORE INSERTING WIRE

JUMPERS CAN BE

TRIMMED FLUSH

1 2 3 4 5 6 SET

SEEK SEEK AM/FM DISC AUX RW FF

Speaker level input from a radio to RCA level output for an aftermarket amplier is the most commonly used conguration for the

L.O.C.PRO ADVANCED. This will create RCA level outputs from a radio that only has speaker level outputs.

In the example below, the Positive(+) and Negative(-) wires of two speakers are “tapped” and connected to the SPEAKER SIGNAL

INPUTS of the LPA. The speakers will continue to play as normal. The REM OUT is connected to the ampliers turn-on. When the

radio is turned on the LPA will automatically turn on the amplier. Lastly, the RCA SIGNAL OUTPUTS from the LPA are connected

to the aftermarket ampliers inputs.

Example Installation

Model Number LPA-2.2 LPA-2.4

Channels 2 IN — 2 OUT 2 IN — 4 OUT

Operating Voltage 9V—16V 9V-16V

Max Input Level (20kH Load Setting)Ω40V / 400W @ 4 Ohms 40V / 400W @ 4 Ohms

Auto Turn On DC Offset / Remote DC Offset / Remote

Output Voltage MAX @ 13.8V 9.5V RMS 9.5V RMS

Turn On Trigger (DC-Offset) 3V—7V 3V—7V

Load Input Impedance 20Ω, 60Ω, 20KΩ 20Ω, 60Ω, 20KΩ

Output Impedance <120Ω <120Ω

Variable Gain Adjustment -28dB—+1dB -28dB—+1dB

Signal To Noise >110dBA @ 6.4V Output >110dBA @ 6.4V Output

THD+N < 0.01% < 0.01%

Input Sensitivity 0.5V—40V 0.5V—40V

Frequency Response 10Hz—20kHz 10Hz—20kHz

Current Draw (Max) 40mA 40mA

Low Pass Filter <250Hz <250Hz

Bass Boost 0dB to +12dB 0dB to +12dB

Clip Indicator YES YES

Remote Level Control OPTIONAL (PN: LPA-REM) OPTIONAL (PN: LPA-REM)

Chassis Type Stamped Steel Stamped Steel

Terminal Gauge 18AWG / Quick Connect 18AWG / Quick Connect

Specications

OEM RADIO

CHASSIS GROUND (-)

12V CONSTANT POWER (+)

REMOTE AMP TURN-ON

Technical Support | Phone: 727-592-5991 | Email: support@aampglobal.com | Chat: PAC-Audio.com | IM-LPA2X REV. 040821

For more installation examples, tech tips and updates,

visit the L.O.C.PRO ADVANCED product pages on

PAC-Audio.com

Technical Support | Phone: 727-592-5991 | Email: support@aampglobal.com | Chat: PAC-Audio.com

2021 | TT-LPA-GAIN-ADJ 040721

Advanced method –

Required items:

• Digital Multi-Meter

• Test track media @ 1kHz and 100Hz. (Download from PAC-Audio website’s LPA section)

Pr yoper level adjustment is crucial for obtaining the best possible sound qualit . Following the guidelines

below will enable you to p operly set the output gain of the Lr PA using equipment that is eadily available. r

. This max line-level input will be

your target setting you will ead on the multi-meter r.

Perform the following procedure for each LPA you are installing.

1. Start with gain adjustment levels on LPA set to minimum.

o rff any loudness or other signal p ocessing features (preset EQ).

3. Turn source unit to maximum volume and start test track (1kHz for mid/high or full range, 100Hz for sub).

If Bluetooth is used as sou ce, make sur re the device volume is set to maximum.

4. Choose either left or right channel - With multi-meter, test output of LPA front channels. Probe with neg-

ative on RCA shield and positive in center of RCA output.

gain level if clipping light turns on.

requirements).

7. Turn volume down and system off.

Example scenarios:

voltage from the LPA.

age from the LPA.

Basic method –

2. Turn head unit to ¾ maximum volume and play test track (Random Noise) or a familiar song that has

dynamic attributes.

For example, if your volume goes to 40 you will tu n it up to 30 and play a song that has somer

quiet sections and some really loud sections.

3. Slowly adjust f ont channel gain of LPA until just a hint of distortion is audible, and thenr

back down gain just under that th eshold and the distortion goes awar y.

4. Repeat steps 1-3 for rear channels.

Line Output Converter Gain Level Set-Up

Produktspezifikationen

Marke:	PAC
Kategorie:	Audio/Video-Konverter
Modell:	LocPro Advanced LPA-2.4

Brauchst du Hilfe?

Wenn Sie Hilfe mit PAC LocPro Advanced LPA-2.4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Audio/Video-Konverter PAC

PAC LocPro Advanced LPA-E.4 Bedienungsanleitung

11 August 2024

PAC LocPro Advanced LPA1.2 Bedienungsanleitung

9 August 2024

PAC LocPro Advanced LPA1.4 Bedienungsanleitung

7 August 2024

PAC LocPro Advanced LPA-2.4 Bedienungsanleitung

6 August 2024

PAC LocPro Advanced LPA-2.2 Bedienungsanleitung

23 November 2023

Bedienungsanleitung Audio/Video-Konverter

Neueste Bedienungsanleitung für -Kategorien-

Abus TVAC20001 Bedienungsanleitung

11 Oktober 2024

Cambridge DacMagic Bedienungsanleitung

4 Oktober 2024

König KN-HDMICON26 Bedienungsanleitung

2 Oktober 2024

LevelOne GVM-1101 Bedienungsanleitung

30 September 2024

StarTech.com VS123HD Bedienungsanleitung

26 September 2024

StarTech.com VS421HDDP Bedienungsanleitung

26 September 2024

StarTech.com ST228MX Bedienungsanleitung

26 September 2024

StarTech.com HDMI2DVI Bedienungsanleitung

26 September 2024

StarTech.com VGANTSCPRO Bedienungsanleitung

26 September 2024

StarTech.com CPNT2VGAA Bedienungsanleitung

26 September 2024