Ozito RHD-6100 Bedienungsanleitung

Ozito Bohrmaschine RHD-6100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito RHD-6100 (6 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
ROTARY
HAMMER
DRILL KIT
1500W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1500W
Impact Power: 5 Joule
Impact Rate: 3,000 bpm
No Load Speed: 750/min
Accessory Fitment: SDS+
Drilling Capacities: Timber 40mm
Steel 13mm
Masonry 36mm
RHD-6100
WHAT’S IN THE BOX
Kit Box
Rotary Hammer Drill
Side Handle
Accessories
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
ozito.com.au
0816
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: carbon brushes, included accessories etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
required
drilling
depth
KNOW YOUR PRODUCT
1. USING THE DEPTH ROD
The depth rod allows you to drill to a predetermined depth.
1. Loosen the depth rod
securing nut then insert
depth rod.
4. Drill the hole until
the end of the
depth rod touches
the workpiece.
3. Tighten the depth
rod securing nut to
lock the depth rod
into place.
2. Adjust the depth
rod so the drill bit
extends beyond the
end of the depth
rod to the required
drilling depth.
1 SDS+ Accessory Holder
2 Accessory Locking Sleeve
3 Magnesium Gear Case
4 Side Handle
5 Depth Rod Locking Knob
6 Side Mode Selector
7 Grease Cap
8 Rear Mode Selector
9 On/Off Switch
10 Soft Grip Rear Handle
ROTARY HAMMER DRILL
11 Depth Rod
12 3 x SDS+ 150mm Drill Bits
13 1 x SDS+ Flat Chisel
14 x 250mm
14 1 x SDS+ Point Chisel
14 x 250mm
15 Dust Cover
16 Tub of Grease
17 Pin Spanner
ACCESSORIES
SETUP & PREPARATION
Ensure the tool is disconnected from the power supply before
performing any of the following operations.
2. SDS+ ACCESSORIES 3.
FITTING AND USING THE DUST COVER
1. Prior to insertion into
chuck, ensure the SDS
+
accessory is clear of
dust and debris.
1. Slide dust cover over
accessory.
3. Insert drill bit in locking
sleeve.
4. Press dust cover to the
end of locking sleeve.
2. Add lubrication grease.
3. Pull locking sleeve back
and hold.
5. Rotate and continue to
insert as far as possible.
7. Checked SDS+ accessory
is locked. Try to pull it out.
Note: It should have approx
10 – 20mm movement. This
is normal.
2. Prior to insertion into
drill add supplied
lubricant to the SDS
+
accessory.
4. Insert SDS+ Accessory.
6. Release locking sleeve.
8. To remove the SDS+
accessory pull back the
locking sleeve and pull
accessory out.
Accessory
SDS+
The cover catches dust and debris - while using the drill upright or
overhead - to avoid dust entering the air vents.


Produktspezifikationen

Marke: Ozito
Kategorie: Bohrmaschine
Modell: RHD-6100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito RHD-6100 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bohrmaschine Ozito

Bedienungsanleitung Bohrmaschine

Neueste Bedienungsanleitung fĂźr -Kategorien-