Ozito HDR-710 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito HDR-710 (6 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
HAMMER
DRILL
710W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 710W
Input: 230-240V ~ 50Hz
Chuck Size: 13mm (1/2
”) Keyed
No Load Speed: 0-2,700/min
Impact Rate: 0-43,200bpm
Drilling Capacities: Timber 25mm
Masonry 13mm
Steel 10mm
Weight: 2.3kg
HDR-710
WHAT’S IN THE BOX
Hammer Drill
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: carbon brushes, chuck, depth rod,
chuck key, auxiliary handle, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Depth Rod
0517
Chuck Key
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. SIDE HANDLE & DEPTH ROD
The side handle provides additional comfort, control, and guidance
for the hammer drill.
1 Loosen the side handle.
Slide handle onto the collar
mount of the hammer drill.
1 To adjust, loosen the
side handle.
1 Chuck
2 Side Handle
3 Hammer Selector
4 Forward/Reverse Lever
5 Speed Selection Dial
6 Variable Speed Switch
7 Lock-On Button
HAMMER DRILL
2 Adjust to any position, 360°
around the collar mount.
Tighten side handle.
2 Adjust the depth
rod so the bit
extends beyond
the end of the rod
to the required
drilling depth.
3 Tighten the side handle to
secure the depth rod in this
position.
required
drilling depth
Depth Rod
Side Handle
The depth rod helps to drill to a pre-determined depth.
WARNING! Ensure the tool is turned off & disconnected from the
power supply before performing any of the following operations.
8 Chuck Key 9 Depth Rod
ACCESSORIES
2. CHUCK 3. CONTROLS
2 To start drilling squeeze the
variable speed switch.
3 To stop drilling release the
switch.
1 Open the chuck jaws
slightly larger than the
bit you wish to insert.
4 To ensure the bit is
securely fastened,
insert the chuck
key into 1 of the
3 holes on the
chuck. Turn chuck
key clockwise.
3 Hand tighten the chuck
jaws.
2 Insert the drill bit,
making sure it is
centred in the jaws.
OPERATION
1 To lock the drill on, squeeze
the variable speed switch
(a) then depress the lock
on button (b).
2 Release the variable speed
switch, then the lock on
button.
3 To unlock the drill,
squeeze and release
the variable speed
switch.
Variable Speed Switch
Lock On Button
Keyed Chuck
a
b
a
b
1 Plug the tool into the mains power supply.
5 Repeat this step with the two remaining chuck holes.
WARNING! THE POWER SUPPLY FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30MA OR LESS). A RESIDUAL CURRENT
DEVICE REDUCES THE RISK OF ELECTRIC SHOCK.


Produktspezifikationen

Marke: Ozito
Kategorie: Bohrmaschine
Modell: HDR-710

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito HDR-710 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bohrmaschine Ozito

Bedienungsanleitung Bohrmaschine

Neueste Bedienungsanleitung fĂźr -Kategorien-