Ozito PXROS-125U Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXROS-125U (3 Seiten) in der Kategorie Sander. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
SPECIFICATIONS
Input: 18V
No Load Speed: 7,000-11,000/min
Oscillatory Circuit: Ø2mm
Sanding Pad Size: 125mm
Grinding / Sanding Area: Ø125mm
Paper Fitment: Hook & Loop
Weight: 1.2kg
RANDOM
ORBITAL SANDER
ORIGINAL INSTRUCTIONS
PXROS-125U
Art.-No.: 30.002.85 I.-No.: 11017
ozito-diy.co.uk
WARRANTY
OZITO UK Champion’s Business Park, Unit 10, 1st Floor, Arrowe Brook Road, Upton, Wirral, Merseyside, CH49 0AB
All of our products undergo strict quality checks to ensure that they reach you in perfect
condition. In the unlikely event that your device develops a fault, please contact our service
department at the address shown on this guarantee card. You can also contact us by
telephone using the customer service number shown. Please note the following terms under
which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the manufacturer
mentioned below promises to buyers of its new products in addition to their statutory
guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on
a product which you have bought from the manufacturer mentioned below are limited to
either the rectication of said defects on the product or the replacement of the product,
whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or professional
applications. A guarantee contract will not be created if the device has been used by
commercial, trade or industrial business or has been exposed to similar stresses during the
guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to
incorrect installation, a failure to follow the operating instructions (for example connecting
it to an incorrect mains voltage or current type) or a failure to follow the maintenance and
safety instructions or by exposing the device to abnormal environmental conditions or by
lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the
device or the use or unapproved tools or accessories), ingress of foreign bodies into the
device (such as sand, stones or dust, transport damage), the use of force or damage caused
by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by
normal use of the device.
4. Your Product is guaranteed for a period of 60 months from the original date of purchase
and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are
covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims
should be submitted before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the guarantee period.
The original guarantee period remains applicable to the device even if repairs are carried
out or parts are replaced. In such cases, the work performed or parts tted will not result
in an extension of the guarantee period, and no new guarantee will become active for the
work performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and
missing parts as set out in the service information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
STANDARD EQUIPMENT
Random Orbital
Sander
Sandpaper x 1
Dust Bag
MAINTENANCE TROUBLESHOOTING
• Keep ventilation slots of the sander clean at all times to ensure efcient operation.
• After each use, blow air through the tool housing to ensure it is free from all dust, dirt, etc. Build
up of dust, dirt particles may cause the tool to overheat and shorten the life of the tool.
• If the housing of the sander requires cleaning, do not use solvents but a moist soft cloth or soft
brush only.
• Never let any liquid get inside the tool, never immerse any part of the tool into liquid.
• No lubrication is necessary as the tool has sealed bearings.
• When not in use, the sander should be stored in a dry, frost free location not within the reach of
children.
WARNING! ALWAYS ENSURE THE TOOL HAS
COMPLETELY STOPPED AND THE BATTERY IS
REMOVED PRIOR TO ANY MAINTENANCE.
Battery protection system
The tool is equipped with the battery protection system, which helps to ensure a long service
life.
The output power automatically cuts off during operation when the tool and/or battery are
placed under the following situations:
• When the tool is overloaded:
If this occurs, release the trigger switch and remove causes of overload, then pull the
switch trigger again to restart.
• When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way damage the tool.
Note: The indicated capacity may be lower than the actual level during use or immediately
after using the tool.
LED lights do not illuminate on charger
Check the charging adaptor is securely plugged into the wall out let.
Check the battery is rmly connected to the charging cradle.
Check that the charging jack is securely connected to the charging cradle.
Sparking visible through the housing air vents
A small amount of sparking may be visible through the housing vents. This is normal
and does not indicate a problem.
Sandpaper Selection
Selecting the correct grit of sandpaper is an important step in achieving optimum results. Coarse
grit will remove the most material. Finer grit will produce a smoother nish. The condition of the
workpiece will determine the grit of the sandpaper to be used. The higher the grit number, the ner
the grade of sandpaper.
If the surface is rough, start with a coarse grit and sand until the surface is uniform. Medium grit
may then be used to remove scratches left by the coarser grit. Finer grit is then used to nish the
surface. Always continue sanding with each grade of sandpaper until the surface is uniform.
MATERIAL APPROPRIATE GRIT
Coarse Sanding Fine Sanding
Paintwork 180 400
Wood: Softwood 60 240
Hardwood 60 180
Veneer 240 320
Note: If intermediate sanding is required, choose a grit rating between coarse and ne. The above
table is intended as a guide only. To ensure a satisfactory result, a small, inconspicuous area should
rst be tested to ensure the grit of sandpaper chosen is suitable for the desired nish.
RANDOM ORBITAL SANDER SAFETY WARNINGS
0318
3
3
SOUND & VIBRATION
Sound and vibration values were measured in accordance with EN 60745.
Lpa sound pressure level: 74.3 dB
Kpa uncertainty: 3 dB
Lwa
sound power level: 85.3 dB
Kwa uncertainty: 3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in accordance with EN 60745.
Vibration emission value a h = 5.33 m/s2
K uncertainty = 1.5 m/s 2
Keep the noise emissions and vibrations to a minimum.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
SERVICE INFORMATION
Please note that the following parts of this product are subject to normal or natural
wear and that the following parts are therefore also required for use as consumables.
* Not necessarily included in the scope of delivery!
Category Example
Wear parts* Grinding/sanding plate, Battery
Consumables* Grinding/sanding paper
Missing parts
DESCRIPTION OF SYMBOLS
Danger! Read the operating instructions to reduce the risk of inquiry.
Caution! Wear ear-muffs. The impact of noise can cause
damage to hearing.
Caution! Wear a breathing mask. Dust which is injurious to
health can be generated when working on wood and other materials. Never
use the device to work on any materials containing asbestos!
Caution! Wear safety goggles. Sparks generated during
working or splinters, chips and dust emitted by the device can cause
loss of sight.
WARNING!
• This tool may only be used for dry grinding/ sanding operations.
• Use of the tool on materials containing asbestos is prohibited.
• Keep your workplace clean and well illuminated.
• Make sure that the workpiece is sufciently secured so that it cannot slip.
• Keep children away.
• For your own sake, keep the machine clean at all times and check it for signs of damage each time
after using it.
• Make sure that the switch is set to OFF before you insert the plug into the power supply socket.
• Make sure of your footing, particularly when working on ladders and platforms.
• Harmful or toxic dust can be produced when working on wood or metal.
Touching or inhaling this dust can be harmful for the operator and other persons nearby.
• Hold the equipment by the insulated handles because the grinding/sanding belt may strike the
equipment’s own power cable. Damaging a live cable may make the metal parts of the equipment live
and cause an electric shock.
• Important! Wear safety goggles and a dust mask.
Children should be supervised to ensure that they do not play with the appliance.
Do not lose these safety instructions.
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk at your local
Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: info@ozito-diy.co.uk
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its
implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical
equipment must make sure that the equipment is properly disposed of if p1-he no longer wants to keep
the equipment. The old equipment can be returned to a suitable collection point that will dispose of
the equipment in accordance with the national recycling and waste disposal regulations. This does not
apply to any accessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
GENERAL POWER TOOL SAFETY WARNINGS
DECLARATION OF CONFORMITY
Yang/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Cordless Random Orbital Sander PXROS-125U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
X 2006/42/EC
Annex IV
Noti ed Body:
Noti ed Body No.:
Reg. No.:
2000/14/EC_2005/88/EC
Annex V
Annex VI
Noise: measured LWA = dB (A); guaranteed LWA = dB (A)
P = KW; L/Ø = cm
Noti ed Body:
2012/46/EU
Emission No.:
Standard references: EN 62841-1; EN 62841-2-4; EN 55014-1; EN 55014-2
Landau/Isar, den 21.03.2018
First CE: 18 Archive-File/Record: NAPR018290
Art.-No.: 30.002.85 I.-No.: 11017 Alex KurzDocuments registrar:
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
DANGER! Read all safety regulations and instructions. Any errors made in following the safety
regulations and instructions may result in an electric shock, re and/or serious injury.
Keep all safety regulations and instructions in a safe place for future use. The term “electric tool” used
in the safety instructions refers to electric tools operated from the mains power supply (with a power cable) and to battery operated
electric tools (without a power cable).
1. Workplace safety
a) Keep your work area clean and well illuminated. Untidy or unlit work areas can result in accidents.
b) Do not operate the electric tool in an environment where there is a risk of explosions and
where there are inflammable liquids, gases or dust. Electric tools produce sparks which could set the dust or
vapours alight.
c) Keep the electric tool out of the reach of children and other persons. If there is a distraction, you may
lose control of the appliance.
2. Electrical safety
a) The connector plug from this electric tool must fit into the socket. The plug should never be
altered in any way. Never use adapter plugs together with earthed electric tools. Unaltered plugs and
correct sockets reduce the risk of an electric shock.
b) Avoid bodily contact with earthed surfaces such as pipes, heating, ovens and fridges. The risk of
electric shock is increased if your body is earthed.
c) Keep the tool out of the rain and away from moisture. The ingress of water into an electric tool increases the
risk of an electric shock.
d) Do not use the cable to carry the electric tool, to hang it up or to pull it out of the socket.
Keep the cable away from heat, oil, sharp edges and moving parts of the appliance. Damaged or
entangled cables increase the risk of an electric shock.
e) If you are working outdoors with an electric tool, only use extension cables which are designed
specifically for this purpose. Using specially designed outdoor extension cables, the risk of electric shock is reduced.
f) If operation of the electric tool in a damp environment can not be avoided, use a earth-leakage
circuit-breaker. The earthleakage circuit-breaker reduces the risk of an electric shock.
3. Safety of persons
a) Be careful, watch what you are doing and use an electric tool sensibly. Do not use the tool if
you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when using the
electric tool can result in serious injuries.
b) Wear personal protection equipment and always wear safety goggles. Wearing personal protection
(such as dust masks, non-slip safety shoes, safety helmet or ear protection, depending upon the type and use of the electric tool)
reduces the risk of injury.
c) up accidentally. Ensure that the electric tool is switched off Make sure that the appliance cannot start
before you connect it to the power supply and/or insert the battery, or pick up or carry the tool.
If your nger is on the switch whilst carrying the electric tool or if you connect the appliance to the mains when it is switched on, this
can lead to accidents.
d) Remove keys and wrenches before switching on the electric tool. A tool or key which comes into contact
with rotating parts of the appliance can lead to injuries.
e) Avoid abnormal working postures. Make sure you stand squarely and keep your balance at all
times. In this way, you can control the electric tool better in unexpected circumstances.
f) Wear suitable work clothes. Do not wear loose clothing or jewellery. Keep hair, clothes and
gloves away from moving parts. Loose clothing, jewellery or long hair can get trapped in moving parts.
g) If vacuuming devices and draining devices can be fitted, make sure that these are correctly
attached and correctly used. The use of a dust extraction system can reduce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the correct tool for your work. You will be able to work better and
more safely within the given performance boundaries.
b) Do not use an electric tool with a defective switch. An electric tool that cannot be switched on or off is
dangerous and must be repaired.
c) Pull the plug out of the socket and/or remove the battery before making any adjustments to
the appliance, changing accessories or put the appliance down. This safety measure prevents starting the
electric tool unintentionally.
d) Keep unused electric tools out of the reach of children. Do not allow people who are not
familiar with the appliance or who have not read these instructions to use the appliance. Electric
tools are dangerous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check whether moving parts are functioning properly and not
jamming, whether parts are broken or damaged enough that the functioning of this electric tool
is affected. Have damaged parts repaired before using the appliance. Many accidents are caused by badly
maintained electric tools.
f) Keep your cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges will jam less
and are easier to control.
g) Make sure to use electric tools, accessories, attachments, etc. in accordance with these
instructions. Take the conditions in your work area and the job in hand into account. Using electric
tools for any purpose other than the one for which they are intended can lead to dangerous situations.
5. Using and handling the cordless tool
a) Only charge the batteries in chargers that are recommended by the manufacturer. A charger that
is designed for a certain type of battery may pose a re risk if it is used with other types of battery.
b) Use only the correct batteries in the electric tools. The use of other batteries may result in injuries and a re
risk.
c) Keep unused batteries away from paper clips, coins, keys, nails, screws and other metallic
objects that could cause a short circuit between the contacts. A short circuit between the battery contacts
may cause burns or a re.
d) In case of incorrect use, fluid may escape from the battery. Avoid contact with it. If you touch
it by accident, rinse the affected area with water. If you get the fluid in your eyes, also seek
medical advice. Leaking battery uid can cause skin irritation or burns.
6. Service
a) Have your electric tool repaired only by trained personnel using only genuine spare parts. This will
ensure that your electric tool remains safe to use.
Additional safety instructions We pay a great deal of attention to the design of every battery pack to ensure that we supply
you with batteries which feature maximum power density, durability and safety. The battery cells have a wide range of safety devices.
Each individual cell is initially formatted and its electrical characteristic curves are recorded. These data are then used exclusively
to be able to assemble the best possible battery packs. Despite all the safety precautions, caution must always
be exercised when handling batteries. The following points must be obeyed at all times to ensure
safe use. Safe use can only be guaranteed if undamaged cells are used. Incorrect handling can
cause cell damage.
Important: Analyses conrm that incorrect use and poor care are the main causes of the damage caused by high performance
batteries.
ELECTRICAL SAFETY
WARNING! When using mains-powered tools, basic safety precautions, including the
following, should always be followed to reduce risk of fire, electric shock, personal injury
and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
Before you connect the charger to the mains supply make sure that the data on the rating plate are identical to the mains data.
This tools charger is double insulated; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical insulation failure within the tool.
The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current
device reduces the risk of electric shock.
Double insulated
PXROS-125U
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the Ozito
Power X Change Range.
3
4. CONTROLS
1 To start the sander press
the on/off switch into
the on position “I”.
Switching On and Off
Variable Speed Dial
2 To stop operation, press
the on/off switch into
the off position “0”.
2 To decrease the rotation speed
of the tool, rotate the dial to a
lower number.
1 To increase the rotation speed
of the tool, rotate the dial to a
higher number.
3
IO
3
I
O
1
3
1 Position the sander over
a dust bin and remove
the dust bag.
The dust bag should be emptied when it becomes 1/3 full for optimum dust
extraction.
Emptying the Dust Bag
2 Empty the dust bag into a bin
and then ret the dust bag onto
the dust extraction adaptor.
3. BATTERY & DUST BAG
Inserting the Battery
Removing the Battery
3
3
3
1 Slide the grooves of the battery
into the recess at the back of the
tool, until it clicks into place.
1 Press and hold the battery
release tab.
2 Slide the battery out of the tool
to remove.
3
3
5. SANDING 6. SANDING TIPS
KNOW YOUR PRODUCT
2. ASSEMBLY
1. BEFORE USE
SETUP & PREPARATION
1 Align the opening of the dust bag
with the dust extraction adaptor
and push on.
1 Align the sandpaper with the pad and press on.
2 Replace the sandpaper once it is worn.
2 To remove, simply pull
the dust bag away from
the sander.
Attaching the Sandpaper
Fitting and Removing the Dust Bag
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
OPERATION
CORDLESS RANDOM ORBITAL SANDER
1 2 3 4 5 6
1 Dust Sealed On/Off Switch
2 Sure Grip Handle
3 Variable Speed Dial
4 Battery Seating
5 Hook & Loop Sanding Pad
6 Dust Bag
ACCESSORIES
7
7 Sandpaper (80grit)
Side to SideBackward/ Forward
1 Secure the material to be
sanding where possible.
3 Gradually lower the sander onto the workpiece with a slight forward
movement.
2 With a rm grip on the sander, switch the sander on.
4 For optimum results, use either of these strokes.
3
IO
Never force the sander. The weight of the sander supplies adequate pressure,
allowing the sandpaper to do the work. Applying additional pressure will slow
the motor, rapidly wear the sandpaper, and greatly reduce the sander speed.
This will slow the removal rate and produce an inferior quality surface.
CAUTION: Excessive pressure will overload the motor, causing possible
damage to the sander by overheating the motor; or damage to the workpiece.
Be sure to check your workpiece often. The sander is capable of removing
material rapidly, especially with coarse paper.
The random orbital action of your sander allows you to sand with the grain, or
at any angle across it for most sanding jobs. In the nal stages a better nish
will be achieved by sanding with the grain.
Do not sand on one spot for too long. The sander’s rapid action may remove
too much material, creating an uneven surface.
CAUTION: DO NOT USE FOR SANDING PLASTER AS
THIS WILL VOID THE WARRANTY.
Items Supplied
Please check that the article is complete as specied in the scope of delivery. If parts
are missing, please contact our service center or the sales outlet where you made
your purchase at the latest within 5 working days after purchasing the product and
upon presentation of a valid bill of purchase. Also, refer to the warranty table in the
service information at the end of the operating instructions.
• Open the packaging and take out the equipment with care.
• Remove the packaging material and any packaging and/or transportation braces (if
available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport damage.
• If possible, please keep the packaging until the end of the guarantee period.
Danger!
The equipment and packaging material are not toys. Do not let
children play with plastic bags, foils or small parts. There is a
danger of swallowing or suffocating!
Proper Use
The equipment is designed for the grinding/san ding of wood, iron, plastic and similar
materials using the appropriate grinding/sanding paper. The machine is not suitable
for wet grinding/sanding.
The equipment is to be used only for its prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade
or industrial applications. Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equivalent purposes.
Caution!
Residual risks
Even if you use this electric power tool in accordance with
instructions, certain residual risks cannot be rules out.
The following hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used over a
prolonged period or is not properly guided and maintained.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Sander |
| Modell: | PXROS-125U |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito PXROS-125U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sander Ozito
18 August 2024
16 August 2024
15 August 2024
15 August 2024
15 August 2024
12 August 2024
10 August 2024
9 August 2024
24 Juli 2024
21 Juli 2024
Bedienungsanleitung Sander
- Sander Makita
- Sander Bosch
- Sander Flex
- Sander Parkside
- Sander Vonroc
- Sander AEG
- Sander Arendo
- Sander Gastroback
- Sander Black And Decker
- Sander Cocraft
- Sander FERM
- Sander Ryobi
- Sander Skil
- Sander Topcraft
- Sander Trotec
- Sander Hilti
- Sander Bort
- Sander DeWalt
- Sander Einhell
- Sander Elu
- Sander Festool
- Sander Mafell
- Sander Maktec
- Sander Worx
- Sander Tacklife
- Sander Hikoki
- Sander Hitachi
- Sander Hyundai
- Sander Hazet
- Sander Kinzo
- Sander Kress
- Sander Max
- Sander Metabo
- Sander Stanley
- Sander Güde
- Sander Power Craft
- Sander Scheppach
- Sander Probuilder
- Sander Workzone
- Sander Biltema
- Sander Meec Tools
- Sander Dremel
- Sander Fieldmann
- Sander King Craft
- Sander Proxxon
- Sander Westfalia
- Sander Dedra
- Sander DURO
- Sander Far Tools
- Sander Silverline
- Sander Holzmann
- Sander Stomer
- Sander Batavia
- Sander Matrix
- Sander Bavaria
- Sander Brüder Mannesmann
- Sander Milwaukee
- Sander Toolcraft
- Sander Fein
- Sander Craftsman
- Sander Powerplus
- Sander Rupes
- Sander Alpha Tools
- Sander Toledo
- Sander Ridgid
- Sander Porter-Cable
- Sander VARO
- Sander Duro Pro
- Sander Gamma
- Sander Global
- Sander Protool
- Sander Toolson
- Sander Wagner SprayTech
- Sander Meister Craft
- Sander Truper
- Sander RIKON
- Sander Einhell Bavaria
- Sander Tryton
- Sander FIXIT
- Sander Ribimex
- Sander Black Decker
- Sander Pevec
- Sander Handwerk
- Sander TAURUS Titanium
- Sander Stalco
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
8 Oktober 2024
7 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
1 Oktober 2024