Ozito PXCSDMS-018 Bedienungsanleitung

Ozito Rasenmäher PXCSDMS-018

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXCSDMS-018 (6 Seiten) in der Kategorie Rasenmäher. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
BRUSHLESS STEEL
DECK MOWER
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage: 2 x 18V
Cutting Diameter: 470mm
Cutting Heights: 30 - 65mm, 6 position
No Load Speed: 3,300/min
Grass Catcher: 75 litres
Weight (Tool Only): 27kg
PXCSDMS-018
Brushless Lawn Mower
Handle Securing Set x 4, Cable
Clip
ozito.com.au
Mulching Plug
Side Ejector Adaptor
Safety Key, Cleaning Scraper
STANDARD EQUIPMENT
WARRANTY
0418
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: grass catcher,
wheels, blade, cord clips, bearings etc..
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
13. Safety Key
14. Cleaning Scraper
15. Side Ejector Adaptor
16. Mulching Plug
1. Wheels
2. Side Ejector Cover
3. Battery Cover x 2
4. Grass Catcher Flap
5. Catcher Flap Locking Lever
6. Safety Switch
7. Start/Stop Lever
8. Upper Handle
9. Handle Securing Knob
10. Lower Handle
11. Grass Catcher
12. Cutting Deck
BRUSHLESS LAWN MOWER
KNOW YOUR PRODUCT
1
9
2
10
3
11
4
12
5 6 7 8
13 14
1. ASSEMBLY
SETUP & PREPARATION
1. Place the upper handle over the
upper ends of the lower handle.
1. Place the lower handle
onto the lower handle
bracket. From the handle
securing set, t the bolt
through mounting bracket
then through hole in lower
handle.
Fitting the Upper Handle
Fitting the Lower Handles
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
15
ACCESSORIES
16
2. From the handle securing set, t
the bolts through the inner side of
the lower handle and then through
the holes in the upper handle.
3. Place a washer and handle
securing knobs over the
protruding ends of the bolts.
2. Secure with washer and knob.
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the Ozito
Power X Change Range.
3. Repeat this process on the other side for the second lower handle.
Note: There are 3 holes on each
end of the upper handle, select the
appropriate hole for the height of the
user.
2. PREPARATION
1. Lift up the grass catcher ap with
one hand and guide the catcher
with your other hand onto the
mower housing.
3. To remove, raise the grass
catcher ap and lift the grass
catcher out.
2. Lower the grass catcher and allow
it to sit in place. Lower the grass
catcher ap.
Adjusting the Cutting Height
Fitting and Removing the Grass Catcher
IMPORTANT! ONLY FIT AND REMOVE THE CATCHER
WHEN THE MOWER IS SWITCHED OFF AND THE
MOTOR HAS COME TO A STOP.
1. Locate cord on lower handle. Push
the supplied cord clip over the lower
handle. Place the cable onto the
cord clip to secure in place.
Note: Care should be taken not to
pinch the cord when folding down the
handle.
Securing the Cord
Ensure the cord follows the handle
smoothly from the switch to the body of
the mower.
Note: The grass catcher ap is held
against the grass catcher by a spring.
The height adjustment lever provides 6 cutting heights from 30mm to 65mm.
1. Pull lever outwards away from
the mower body.
2. Adjust until the required cutting
height is selected.
3. Release lever and check that it is
securely seated in the required
cutting height position.
WARNING! WHEN FITTING THE GRASS CATCHER
AFTER EMPTYING, ALWAYS ENSURE THERE IS NO
BUILD UP OF GRASS IN THE GRASS CHUTE.
Grass Catcher Indicator
The grass catcher is tted with an
indicator at the rear of the catcher to
help identify when to empty.
If the indicator drops down while
operating then the grass catcher is full
and needs emptying.
Mulching Adaptor
Side Ejector
In mulching mode the cuttings are shredded in the enclosed mower housing
and then spread back onto the lawn.
IMPORTANT! MULCHING IS ONLY POSSIBLE IF THE
LAWN IS RELATIVELY SHORT.
1. To use the mulching function,
remove the grass catcher, slide
the mulching plug through the
ejector opening and close the
grass catcher ap.
Note: The mulching adaptor must be tted in order to use the side ejector.
1. Lift up the side ejector ap with
one hand and guide the side
ejector adaptor with your other
hand onto the mower housing.
2. Lower the side ejector adaptor
and allow it to sit in place. Lower
the side ejector ap.
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.


Produktspezifikationen

Marke: Ozito
Kategorie: Rasenmäher
Modell: PXCSDMS-018

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXCSDMS-018 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Rasenmäher Ozito

Bedienungsanleitung Rasenmäher

Neueste Bedienungsanleitung fĂĽr -Kategorien-