Ozito LMPC-301U Bedienungsanleitung

Ozito Rasenmäher LMPC-301U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito LMPC-301U (3 Seiten) in der Kategorie Rasenmäher. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Safety information for lawn mowers

• Check the machine for signs of damage before use. Repairs may only be carries out

by our service workshop.

• Worn parts may only be replaced by our service workshop. If necessary contact the

service address provided.

How to use lawn mowers safely

Training

a) Read the directions with due care. Familiarize yourself with the operator controls and

proper operation of the machine.

b) Never allow children or other persons who are not familiar with the operating

instructions to use the mower. Contact your local governmental agency for information

egarding minimum age requirements for the user.

c) Never mow in the direct vicinity of persons -especially children - or animals.

d) Always keep in mind that the operator or user of the equipment is responsible for

accidents involving other persons and/or their property.

Preliminary measures

a) Always wear sturdy, non-slip footwear and long trousers when using the machine.

Never use the machine barefoot or in sandals. Avoid wearing loosely tting clothes or

clothing with hanging belts or cords.

b) Check the ground on which the equipment will be used and remove all objects that

could be caught up or violently ung out.

c) Before using the scythe, visually inspect it to ensure that the blade, mounting

bolts and the entire cutting apparatus are in good working order (i.e. not worn out

or damaged). To prevent any imbalance, replace worn out or damaged blades and

mounting bolts as a set only (if applicable).

Handling

• Only mow in broad daylight or in well-lit conditions.

• Do not use the machine on wet grass.

• Always maintain good footing on inclines.

• Only operate the machine at a walking pace.

• Always mow across hills i.e. never straight up or straight down.

• Be particularly careful when you change direction on a slope.

• Do not mow on overly steep inclines.

• Always be extra careful when turning the mower around and when pulling it towards

you.

• Never use the lawn mower if the guards are damaged or without the attached guards,

e.g. deectors and/or grass catching devices.

• Never move your hands or feet toward or under any rotating parts. Keep clear of the

chute opening at all times.

Maintenance and storage

• Make sure that all nuts, bolts and screws are tightened securely and that the machine

is in safe working condition.

• For your own safety, have worn or damaged parts replaced without delay.

• Take care not to jam your ngers between moving blades and stationary parts of the

equipment while you are adjusting the equipment.

PUSH REEL

MOWER

300mm

ORIGINAL INSTRUCTIONS

LMPC-301U

WHAT’S IN THE BOX

SPARE PARTS

ozito-diy.co.uk

1. Never allow children or people unfamiliar with these instructions to use the

mower.

2. Only use the mower in the manner and for the functions described here in.

3. Never operate the mower when you are tired, ill or under the inuence of drugs,

alcohol or medicine.

4. The operator or user is responsible for accidents or hazards occurring to other

people or their property.

5. Use the mower only in daylight or good articial light.

6. Avoid operating your mower in wet grass, where feasible.

7. Take care in wet grass, you may loose your footing.

8. On slopes be extra careful of your footing and wear non-slip footwear.

9. Mow across the face of slopes, never up and down.

10. Exercise extreme caution when changing direction on slopes. Walk, never run.

11. Mowing on banks and slopes can be dangerous. Do not mow on banks or steep

slopes.

12. Do not walk backwards when mowing, you could trip.

13. Never cut grass by pulling the mower towards you.

14. Never operate the mower with damaged guards or without guards in place.

15. Keep hands and feet away from the blade at all times and especially when the

mower is in use.

16. Do not put hands near the blades during operation.

SAFETY INSTRUCTIONS

1217

MAINTENANCE

General Maintenance

• Keep all nuts, bolts and screws tight to be sure the mower is in a safe

working condition.

• Replace worn or damaged parts for safety.

• Be careful during adjustments of the hand lawn mower to prevent

entrapment of the ngers between moving blade and xed parts

of the machine.

2 x Handle Uprights

Sharpening the blades

Before taking the time and effort to sharpen the blades, make sure that

it needs sharpening. Most of all issues can be solved by ensuring the

blades are properly adjusted ( section).ADJUSTMENTS

1. Prop up the push reel mower so that the blade reel can be rotated

by turning the wheels.

2. Check the blades for nicks and burrs. If any damage is found, it

usually can be removed by holding a le at against the blade and

pushing away from the edge.

3. Examine the cutting bar. It should just meet the blades along their

entire length. (To make sure the cutting bar is located correctly,

grasp a wheel and turn it forward; you should hear a whispery

sound as the blades pass the cutting bar).

4. If the bar is out of alignment, adjust using the adjustment nuts on

the ends of the bar ( section).ADJUSTMENTS

5. Using oft paintbrush, cover the blades with a thin, even coat of

automotive valve-grinding compound (available at automotive

stores).

6. Grasp a wheel and turn it slowly backward so the grinding

compound is squeezed between the blades and the cutting bar,

thereby sharpening both cutting edges as they pass each other. Be

sure that each blade touches the bar as the wheel is rotated.

7. Make about a dozen turns, applying more grinding compound when

necessary.

8. Examine the blade edges. If they look sharp, wash off all the valve

compound with soapy water and rinse thoroughly.

9. Test for sharpness. Insert a sheet of newspaper between the

blades and the cutting bar, and rotate the reel forward. When the

blades cut the paper as easily and as cleanly as a sharp pair of

scissors would, the task is complete.

NOTE: After each use, hose the mower clean and wipe it dry. Wipe all

the metal parts with a thin lm of WD-40 or mineral oil.

WARNING: SHARPEN BLADES ONLY BY HAND.

THE HEAT GENERATED BY A POWER GRINDER

OR AN ELECTRIC DRILL WITH A GRINDING WHEEL

ATTACHED CAN DESTROY THE TEMPER OF THE

METAL. WEAR THICK LEATHER GLOVES WHEN

HANDLING THE BLADE REEL AND CUTTER BAR

AND MAKE SLOW, PRECISE MOVEMENTS TO AVOID

CUTTING OR JAMMING YOUR FINGERS.

7 x Handle Screws & Nuts

(Includes 1 Spare Set)

Mower

Lower Handle

Upper Handle

PUSH LAWN MOWER SAFETY

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

All of our products undergo strict quality checks to ensure that they reach

you in perfect condition. In the unlikely event that your device develops a

fault, please contact our service department at the address shown on this

guarantee card. You can also contact us by telephone using the customer

service number shown. Please note the following terms under which

guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the

manufacturer mentioned below promises to buyers of its new products

in addition to their statutory guarantee claims are not affected by this

guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or

manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we

prefer.

Please note that our devices are not designed for use in commercial, trade

or professional applications. A guarantee contract will not be created if the

device has been used by commercial, trade or industrial business or has

been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly

instructions or due to incorrect installation, a failure to follow the operating

instructions (for example connecting it to an incorrect mains voltage or

current type) or a failure to follow the maintenance and safety instructions

or by exposing the device to abnormal environmental conditions or by lack

of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example

overloading the device or the use or unapproved tools or accessories),

ingress of foreign bodies into the device (such as sand, stones or dust,

transport damage), the use of force or damage caused by external forces

(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural

wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original

date of purchase and is intended for DIY (Do It Yourself) use only. Warranty

excludes consumable parts. Guarantee claims should be submitted

before the end of the guarantee period within two weeks of the defect

being noticed. No guarantee claims will be accepted after the end of the

guarantee period. The original guarantee period remains applicable to the

device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work

performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR

Please refer to the restrictions of this warranty concerning wearing parts,

consumables and missing parts as set out in the service information in

these operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

WARRANTY

SERVICE INFORMATION

Spare parts can be ordered from the Special Orders Desk at your local

Bunnings Warehouse or Homebase store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: info@ozito-diy.co.uk

Please note that the following parts of this product are subject to normal

or natural wear and that the following parts are therefore also required

for use as consumables.

* Not necessarily included in the scope of delivery!

Category Example

Wear parts* Mowing spindle

Consumables*

Missing parts

DESCRIPTION OF SYMBOLS

Warning - Read the operating

instructions to reduce

the risk of injury

Important! Keep other persons

and animals away from

the danger zone!

Caution! - Sharp blades

Take care when the blades are rotating.

Do not put your hands or feet into openings

when the machine is running.

TROUBLESHOOTING

Problem Cause Remedy

Unusual

noises

- Loose screws/parts

- Foreign bodies stuck

in blades

- Damaged blade

Wrongly adjusted

blade

- Tighten the screws

- Remove the foreign

bodies

- Have the blade replaced

- Set the counter blade

Unsatisfactory

cutting results

- Wrongly adjusted

blade

- Blunt blade

- Set the counter blade

- Have the blade

sharpened or replaced

Grass Catcher

SPECIFICATIONS

Cutting Width: 300mm

Cutting Height: 14-47mm

Cutting Blade: Ø125mm

Grass Catcher: 18 Litre

Weight: 6.5kg

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

Changing the Cutting Height

Changing the cutting height

is quick, easy, and requires

no tools. Simply loosen the

locking knobs on each side of

the rear roller. This enables

the roller assembly to slide up

or down to place the cutting

bar at a different height level.

Make sure the height is the

same on both sides. Re-

tighten the locking knobs until

the roller assembly is secured

in position.

NOTE: It is essential that the height is the same on both sides of the

hand lawn mower.

Adjusting the Cutting Bar to the Blades

The cutting bar should be as close to the blades as possible, when the

blades are rotated manually they should make slight contact making a

whispery sound (like scissors opening and closing), ensure the bar does

not stop the blades from rotating.

To raise or lower the bar, loosen or

tighten the adjustment nuts (using

a 10mm spanner, or shifter) on the

ends of the cutting bar (located behind

the reel blades, above the roller as

pictured).

NOTE: A small 1/16 of a turn is a major

adjustment.

To loosen the blades, or move them

further away from the cutting bar,

loosen the cutting bar adjustment nuts on each side equally by turning

them anti-clockwise.

To tighten the blades, or move them closer against the cutting bar,

tighten both cutting bar adjustment nuts equally turning them clockwise.

If the mower is only cutting on one side, the cutting bar may be out of

alignment with the blade reel. Therefore, tighten the side of the mower

that is not cutting to bring it back into alignment.

If the mower is hard to push and the blades barely turn, the cutting bar

may be over tightened against the blade reel.

If the blade reel spins freely and doesn’t make contact against the cutting

bar, or the mower isn’t cutting grass well, the cutting bar may be too

loose against the blade reel.

Walk at a good, steady pace

With a push reel mower, the

rotation of the wheels turn the

blade reel. The mower will tend

to bind up and skid if it is moving

at too slow a pace. The faster the

wheels are travelling, the faster

the blade reel turns. Therefore,

moving at a comfortably quick

walking pace will achieve the best

results.

Overlapping rows

When mowing a lawn, slightly overlap the row

that has already been mowed. This will make

the force required to move the mower easier

because less grass is being mowed at one

time. Overlapping rows will also ensure a neat

cut by removing grass that may have been

missed on the previous row.

Don’t let the grass get too tall

Push reel mowers are harder to push

when the grass gets too tall, therefore it is

recommended to mow on a weekly basis.

General Mowing Preparation

¥ While using the push reel mower always wear substantial footwear

and long trousers.

¥ Make sure the lawn is clear of sticks, stones, wire and debris; that

could be thrown by the blades.

¥ Before using the mower and after any impact, check for signs of wear

or damage and repair as necessary.

¥ Sharpen worn or damaged blades.

Handles

1. To assemble the mower handles you

will require a at-head screwdriver and

a 10mm spanner (or shifter). These

tools are not included with this product.

2. First, select the lower handle and the

two handle uprights. Fasten together

using the four screws and nuts as

indicated.

3. Insert the two handle uprights into

the upper handle.

4. Fasten the handle uprights

and upper handle together

using two screws and nuts as

shown.

5. Now the handle is fully

assembled and ready to be

attached to the mower head.

To attach the handle to the

mower head, locate the two

metal lugs found forward of

the cutting bar adjustment

lock nuts. Insert one of the

large holes in the handle over

the lug, then repeat the same

process on the other side. It

may be necessary to squeeze

the two lower handle arms

together to allow room for locating

the second arm over the remaining metal lug.

1. Upper handle

2. Handle uprights

3. Lower handle

4. Wheels

5. Height adjustment lock

6. Grass Catcher

7. Blade adjustment

8. Blades

9. Rear roller

10. Blade guard

PUSH REEL MOWER

KNOW YOUR PRODUCT

LMPC-301U

2. ASSEMBLY 3. ADJUSTMENTS 4. HOW TO MOW

SETUP & PREPARATION OPERATION

5 6

1. Lay the catcher and

metal bracket out.

2. Fit the two ends of the

bracket into the catcher

body.

4. Fit loops of metal bracket

over hooks on the mower

body.

3. Fit the rubber clips over

the bracket.

5. Fit strap over lower handle and

clip together.

6. Adjust strap as necessary.

Grass Catcher

1. BEFORE USE

Items Supplied

Please check that the article is complete as specied in the scope of

delivery. If parts are missing, please contact our service centre or the

sales outlet where you made your purchase at the latest within 5 working

days after purchasing the product and upon presentation of a valid bill of

purchase. Also, refer to the warranty table in the service information at

the end of the operating instructions.

• Open the packaging and take out the equipment with care.

• Remove the packaging material and any packaging and/or

transportation braces (if available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for transport damage.

• If possible, please keep the packaging until the end of the guarantee

period.

Danger!

The equipment and packaging material are not toys. Do not let

children play with plastic bags, foils or small parts. There is a

danger of swallowing or suffocating!

Proper Use

The hand mower is designed for cutting grass.

It is intended for private use, i.e. for use in home and gardening

environments. Private use here refers to the maintenance of small-scale,

residential areas and does not include public facilities, sporting halls, or

agricultural/forestry applications.

Important! Due to the high risk of bodily injury to the user, the hand

mower may not be used to cut scaling vegetation, planted roofs or

balcony grown grass.

The equipment is to be used only for its prescribed purpose. Any other

use is deemed to be a case of misuse. The user / operator and not the

manufacturer will be liable for any damage or injuries of any kind caused

as a result of this. Please note that our equipment has not been designed

for use in commercial, trade or industrial applications. Our warranty

will be voided if the machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

Push reel mowers don’t mow tall weeds

The push reel mower will tend to roll over tall

weeds without cutting them. This includes

tall weeds that are more than six inches, and

things like dandelions and docs.

If the lawn to be mowed has a signicant

weed infestation, enquire at your local

Bunnings store how to rectify the problem,

or as an alternative, rent a petrol powered

mower to gain control of the lawn. Push

reel mowers are designed to cut lawns in

reasonable condition.

7 8 9 10

Produktspezifikationen

Marke:	Ozito
Kategorie:	Rasenmäher
Modell:	LMPC-301U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito LMPC-301U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Rasenmäher Ozito

Ozito ELM-1230 Bedienungsanleitung

16 August 2024

Ozito ESA-1231U Bedienungsanleitung

15 August 2024

Ozito PXCLMK-218U Bedienungsanleitung

14 August 2024

Ozito PXCLMK-1318EU Bedienungsanleitung

13 August 2024

Ozito PXCLMK-418U Bedienungsanleitung

13 August 2024

Ozito LMPC-301U Bedienungsanleitung

12 August 2024

Ozito ELM-1250U Bedienungsanleitung

11 August 2024

Ozito ELM-1536U Bedienungsanleitung

9 August 2024

Ozito ELM-1030U Bedienungsanleitung

9 August 2024

Ozito PXCSDMS-018 Bedienungsanleitung

30 Juli 2024

Bedienungsanleitung Rasenmäher

Neueste Bedienungsanleitung für -Kategorien-

Troy-Bilt TB410 XP Bedienungsanleitung

15 Oktober 2024

AL-KO Classic 4.64 SP-S Bedienungsanleitung

15 Oktober 2024

Gardena PowerMax 36 A Li Bedienungsanleitung

15 Oktober 2024

Einhell BG-PM 46 Bedienungsanleitung

15 Oktober 2024

Powerplus POWXQG7556 Bedienungsanleitung

14 Oktober 2024

Rover Regal SP Mulch N Catch 51m Bedienungsanleitung

14 Oktober 2024

Solo 546-RS Bedienungsanleitung

14 Oktober 2024

Einhell GE-SC 35 Li Bedienungsanleitung

13 Oktober 2024

Masport President 4000ST Genius Bedienungsanleitung

12 Oktober 2024

Dolmar EM-460 Bedienungsanleitung

12 Oktober 2024