Ozito PXCPRS-018U Bedienungsanleitung

Ozito Sägemaschine PXCPRS-018U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXCPRS-018U (3 Seiten) in der Kategorie Sägemaschine. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

PRS-012

MAINTENANCE

DESCRIPTION OF SYMBOLS

TROUBLESHOOTING

1. When not in use, the tool should be stored in a dry, frost free location, keep

out of children’s reach.

2. Keep ventilation slots of the saw clean at all times and prevent anything from

entering.

3. If the housing of the saw requires cleaning, do not use solvents. Use of a cloth

only is recommended.

4. Blow out the ventilation slots with compressed air periodically.

5. The blade can be sprayed with light oil to avoid rusting.

Note: Ozito Industries will not be responsible for any damage or injuries caused by

repair of the pruning saw by an unauthorised person or by mishandling.

WARRANTY

SPARE PARTS

PRUNING SAW SAFETY WARNINGS

GENERAL POWER TOOL SAFETY WARNINGS

ELECTRICAL SAFETY

0217

BATTERY AND CHARGER SAFETY WARNINGS

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR

BATTERY CHARGER.

1. Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product

using the battery pack.

2. This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk

of re, electric shock or electrocution.

3. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive

internal heat. Place the charger in a position away from any heat source.

4. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the

charger.

5. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or

stress.

6. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk

of re, electric shock or electrocution.

7. Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Have it

checked by an electrician or power tool repairer.

8. Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is required. Incor-

rect reassembly may result in a risk of electric shock, electrocution or re.

9. To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the

battery pack will not reduce this risk.

10. Never attempt to connect 2 chargers together.

11. DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ºC (such as inside

sheds or metal buildings in summer).

12. The charger is designed to operate on standard household electrical power (240 volts). Do not attempt to use it on

any other voltage!

13. The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging

notes and procedures.

14. The longest life and best performance can be obtained if the battery pack is charged when the air temperature is

between 18 - 24ºC. Do not charge the battery pack in an air temperature below 10ºC or above 40ºC. This is important

and will prevent damage to the battery pack.

15. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery can explode in

a re.

16. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, immedi-

ately discontinue use and do not recharge.

17. During charging, the battery must be placed in a well ventilated area.

Warning Read instruction manual

Diameter

mA Milliamperes

Double insulated

/min Revolutions or reciprocation per minute

Ah Amp hour

Indoor use only

Nm o Newton Meters nNo load speed

VVolts Hz Hertz

ac/~ W Alternating current Watts

Direct current

dc/

Wear safety glovesKeep Bystanders away

Wear hearing protection

Do not expose to rainWear respiratory protection

Wear eye protection

LED lights do not illuminate on charger

Check the charging adaptor is securely plugged into the wall outlet.

Check the battery is rmly connected to the charging cradle.

Variable speed trigger is locked

Ensure that the safety switch is pressed left or right to enable the trigger to be pressed.

The blade will not insert or remove from the blade

holder

Ensure the blade holder is rotated completely clockwise before trying to insert or remove

the blade.

Saw has cut out during use

The battery may have run out of power and requires charging. If the battery is fully

charged, it is likely that the battery’s thermal voltage protection has been activated. This

can happen when the saw has been used for extended periods.

Place the battery on the charger for an hour. It will need this time to cool down and for the

protection circuits to be reset.

Saw suddenly speeds up

This is normal. Once the saw has started the cut into the timber, based on load, the blade

will speed up to complete the cut.

Sparking visible through the housing air vents

A small amount of sparking may be visible through the housing vents. This is normal and

does not indicate a problem.

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and

instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the

warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)

power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose

control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching

outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of

electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords

increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use

of a cord suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the inﬂuence of drugs, alcohol

or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting

to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with

your nger on the switch or energising power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power

tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or the battery pack from the power tool

before making any adjustments, changing accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar

with the power tool or these instructions to operate the power tool. Power tools are dangerous in

the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these instructions,

taking into account the working conditions and the work to be performed. Use of the power tool

for operations different from those intended could result in a hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger speciﬁed by the manufacturer. A charger that is suitable for one

type of battery pack may create a risk of re when used with another battery pack.

b. Use of any other battery packs may Use power tools only with speciﬁcally designated battery packs.

create a risk of injury and re.

c. When battery pack is not in use, keep it away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal objects, that can make a connection from

one terminal to another. Shorting the battery terminals together may cause burns or a re.

d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact

accidentally occurs, ﬂush with water. If liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualiﬁed repair person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

b. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualied persons in order to avoid a hazard.

This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Young children should be supervised to ensure that they do not play with the appliance.

• Keep all parts of the body away from the saw blade when the saw is operating. Before

you start the pruning saw, make sure the saw blade is not contacting anything. A moment of

inattention while operating saws may cause entanglement of your clothing or body with the saw blade.

• Wear safety glasses and hearing protection. Further protective equipment for head,

hands, legs and feet is recommended. Adequate protective clothing will reduce personal injury by ying debris

or accidental contact with the saw blade.

• Do not operate a pruning saw in a tree. Operation of a pruning saw while up in a tree may result in personal

injury.

• Always keep proper footing and operate the pruning saw only when standing on ﬁxed,

secure and level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or control of the

saw.

• When cutting a limb that is under tension be alert for spring back. When the tension in the wood

bres is released the spring loaded limb may strike the operator and/or throw the pruning saw out of control.

• Useextremecautionwhencuttingbrushandsaplings. The slender material may catch the saw blade and

be whipped toward you or pull you off balance.

• Keephandlesdry,clean,andfreefromoilandgrease. Greasy, oily handles are slippery causing loss of

control.

• Do not touch the blade or the work piece immediately after operation; they may be extremely hot

and could potentially burn your skin.

• If you withdraw the blade from the work piece during operation, a strong reaction could

be produced, which could cause the blade to snap or cause you to lose your grip and/or control of the saw. Always switch

off the tool and wait until the blade has come to a complete stop before with drawing the blade from the work piece.

• Maintainarmgrip,withthumbsandngersencirclingthepruningsawhandles,withbothhandsonthesawandpositionyour

body and arm to allow you to resist kickback forces. Kickback forces can be controlled by the operator, if proper precautions are

taken. Do not let go of the pruning saw.

• Donotoverreachanddonotcutaboveshoulderheight.Thishelpspreventunintendedtipcontactandenablesbettercontrolof

the pruning saw in unexpected situations.

• Onlyusereplacementbladesspeciedbythemanufacturer.Incorrectbladesmaycausebladebreakageand/orkickback.

SPECIFICATIONS

Input: 18V

Stroke Length: 20mm

Stroke Speed: 1500-2800/min

Max. Cutting Diameter: 70mm (with clamping jaw)

90mm (w/o clamping jaw)

Weight: 1.2kg

WHAT’S IN THE BOX

Cordless Pruning Saw

Battery & Charger sold separately

CORDLESS

PRUNING SAW

ORIGINAL INSTRUCTIONS

ozito-diy.co.uk

PXCPRS-018U

1 x Saw Blade

WARNING!: BEFORE CLEANING YOUR PRUNER OR

CARRYING OUT ANY MAINTENANCE PROCEDURE,

MAKE SURE THAT THE MOTOR IS OFF AND THE

BATTERY REMOVED TO PREVENT ACCIDENTAL STARTING.

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

All of our products undergo strict quality checks to ensure that they reach you in perfect

condition. In the unlikely event that your device develops a fault, please contact our service

department at the address shown on this guarantee card. You can also contact us by

telephone using the customer service number shown. Please note the following terms under

which guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the manufacturer

mentioned below promises to buyers of its new products in addition to their statutory

guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or manufacturing faults on

a product which you have bought from the manufacturer mentioned below are limited to

either the rectication of said defects on the product or the replacement of the product,

whichever we prefer.

Please note that our devices are not designed for use in commercial, trade or professional

applications. A guarantee contract will not be created if the device has been used by

commercial, trade or industrial business or has been exposed to similar stresses during the

guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly instructions or due to

incorrect installation, a failure to follow the operating instructions (for example connecting

it to an incorrect mains voltage or current type) or a failure to follow the maintenance and

safety instructions or by exposing the device to abnormal environmental conditions or by

lack of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example overloading the

device or the use or unapproved tools or accessories), ingress of foreign bodies into the

device (such as sand, stones or dust, transport damage), the use of force or damage caused

by external forces (for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural wear or tear or by

normal use of the device.

4. Your Product is guaranteed for a period of 60 months from the original date of purchase

and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are

covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims

should be submitted before the end of the guarantee period within two weeks of the defect

being noticed. No guarantee claims will be accepted after the end of the guarantee period.

The original guarantee period remains applicable to the device even if repairs are carried

out or parts are replaced. In such cases, the work performed or parts tted will not result

in an extension of the guarantee period, and no new guarantee will become active for the

work performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO

THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts, consumables and

missing parts as set out in the service information in these operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

Spare parts can be ordered from the Special Orders Desk at your local

Bunnings Warehouse or Homebase store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: info@ozito-diy.co.uk

WARNING! When using mains-powered tools, basic safety precautions, including

the following, should always be followed to reduce risk of ﬁre, electric shock, personal

injury and material damage.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

Before you connect the charger to the mains supply make sure that the data on the rating plate are identical to the mains data.

This tools charger is double insulated therefore no earth wire is required.

Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for

added protection against injury resulting from a possible electrical insulation failure within the tool.

The power supply for this products charger should be protected by a residual current device (rated at 30mAor less). A residual current

device reduces the risk of electric shock.

ONLINE

MANUAL

Scan this QR Code with your mobile

device to take you to the online

manual.

KNOW YOUR PRODUCT SETUP & PREPARATION

1. BATTERY & CHARGER (SOLD SEPARATELY) 2. CUTTING BLADES 3. PREPARATION 4. CONTROLS AND OPERATION

1. Blade Holder

2. Locking Sleeve

3. Blade

4. Clamping Jaw

5. Clamp Lever

6. Protective Cover

7. Safety Switch

8. Variable Speed Trigger

9. Main Handle

10. Battery Seating

CORDLESS PRUNING SAW

OPERATION

1 2

3 4 9 105 6 7 8

WARNING! ENSURE THE BATTERY IS DISCONNECTED

FROM THE TOOL BEFORE PERFORMING ANY OF THE

FOLLOWING OPERATIONS.

CAUTION! DO NOT HANDLE BLADES WITHOUT GLOVES

AS THEY ARE SHARP AND CAN BECOME HOT AFTER

USE, POTENTIALLY CAUSING PERSONAL INjURY.

3. Insert the cutting blade into the blade holder then release the blade holder

3. Remove the cutting blade from

the blade holder.

2. Rotate and hold the blade

holder as shown.

2. Rotate and hold the blade

holder as shown.

4. Ensure the blade is

secure by pulling on the

blade.

The pruning saw can be tted with standard reciprocating saw blades, therefore can be

used to cut various timbers and plastics.

Fitting a Cutting Blade

Removing the Cutting Blade

Switching the Saw On and Off

Cutting Branches Using the Clamping jaw

Cutting Without the Clamping jaw

2. Release the variable speed trigger to

stop the pruning saw.

2. Place the branch in

between the clamping

jaws and then lower to

perform the cut.

Note: The clamping jaw

helps to guide the saw when

cutting round branches up to

Ø70mm.

1. Push the safety switch

in from either side of the

tool and then squeeze the

variable speed trigger to

start the pruning saw.

1. Ensure the blade and the clamping jaw is secured correctly and hold the saw rmly.

1. Position the bracket

rail of the saw onto the

material to be cut for

stability and then perform

the cut holding the saw

rmly.

When cutting thicker branches (up to Ø90mm) or sawing wood or plastic the clamping

jaws can be removed to prevent them getting in the way of the cut.

BATTERY & CHARGER

(sold separately)

This tool is compatible with all battery and

chargers from the Ozito Power X Change Range.

CAUTION: THE CHARGER FOR THIS PRODUCT

SHOULD BE PROTECTED BY A RESIDUAL CURRENT

DEVICE (RATED AT 30mA OR LESS).

The purchased battery will be shipped in a low charge condition, and requires charging

prior to use. Allow several cycles of charging and discharging (through use of the tool)

for the battery to reach its optimum performance / runtime.

1. Connect the charger into a mains power outlet.

4. The charger LED will illuminate

red signifying that the battery is

charging.

3. With the charger sitting on a at

surface, align the raised ribs on

the battery with the recess in the

charger and slide onto the charger

ensuring a rm connection.

2. The charger LED will ash green

showing power is being supplied

to the charger.

5. The charger LED will illuminate

green once the battery is charged.

Charging your lithium ion battery - Fast Charger

Charger LED Indicator

LED Indicator Situation

GREEN (Flashing) Stand By (no battery pack is inserted)

RED (Flashing) Battery is charging (low charge)

RED (Illuminated) Battery is charging (mid charge)

GREEN (Illuminated) Battery is 85% - 100% charged and ready for use.

BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin

automatically when battery reaches correct charging

temperature).

BOTH (Flashing) Defective battery. Never charge a defective battery

pack!

Remove battery pack from charger.

Battery Charge Indicator

The purchased battery is equipped with a

battery charge indicator to show the state of

the battery charge.

Press the charge indicator button and look to

see which LED lights.

Battery requires

immediate charging

Low state of charge, requires charging soon.

Mid state of charge

Full state of charge.

Note: The battery needs to be removed from the tool to check the state of charge.

1. Connect the charger into a mains power outlet.

4. The charger LED will illuminate red signifying that the battery is charging.

3. With the battery sitting on a at

surface, align the raised ribs on the

battery with the recess in the charger

and slide onto the battery ensuring a

rm connection.

2. The charger LED will ash green

showing power is being supplied

to the charger.

5. When removing the charger from the

battery, rst press the battery release

tab, then slide the charger from its

position.

Charging your lithium ion battery - Eco Charger

Charger LED Indicator

LED Indicator Situation

GREEN (Flashing) Stand By (no battery pack is inserted)

RED (Illuminated) Battery is charging (low charge)

GREEN (Illuminated) Battery is charged and ready for use.

RED (Flashing) Battery or Charger fault

RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from

charger and store at room temperature 20ºC. Insert

battery again when at correct charging temperature). If

this happens again, the battery is defective and needs

to be replaced.

1. Press both sides of the

protective cover and open

it.

5. Close the protective cover

1. Open the protective cover.

4. Close the protective cover

PXCPRS-018U

The clamping jaw allows branches to be gripped up to Ø60mm, providing cutting of

unsupported branches easier. When cutting wider branches or timber, the clamping jaw

can be removed and the pruning saw can be used as a standard reciprocating saw.

Removing the Clamping jaw

1. Press the clamp lever and

pull the bracket from the

bracket rail.

Clamp

Lever

Bracket

Rail

Fitting the Clamping jaw

1. First align the clamping

jaw with the bracket rail,

then slide it onto the rail

while pressing the clamp

lever.

2. Release the clamp lever

to lock in place.

Note: Ensure the clamp

jaw is secured by pulling

the clamp jaw away from

the body.

Installing and Removing the Batttery

1. Slide the battery in so

that it clicks into place.

2. To remove, press and hold the

battery release tab to release the

battery, then slide the battery out..

When the variable speed trigger is fully depressed and the saw has started the cut into

the timber, based on load, the blade will speed up to complete the cut.

Torque Control Trigger

Produktspezifikationen

Marke:	Ozito
Kategorie:	Sägemaschine
Modell:	PXCPRS-018U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXCPRS-018U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Sägemaschine Ozito

Ozito PXCCSK-4182 Bedienungsanleitung

6 September 2024

Ozito PXBPCK-1825 Bedienungsanleitung

6 September 2024

Ozito PXTCSK-2520 Bedienungsanleitung

6 September 2024

Ozito PXPRSS-018 Bedienungsanleitung

5 September 2024

Ozito PXBPCS-1815 Bedienungsanleitung

5 September 2024

Ozito RSW-5200 Bedienungsanleitung

18 August 2024

Ozito JSW-4000U Bedienungsanleitung

17 August 2024

Ozito JSW-8100U Bedienungsanleitung

16 August 2024

Ozito RSW-5200U Bedienungsanleitung

16 August 2024

Ozito SCMS-10STANDU Bedienungsanleitung

14 August 2024

Bedienungsanleitung Sägemaschine

Neueste Bedienungsanleitung für -Kategorien-

MSW -TAS287 Bedienungsanleitung

16 Oktober 2024

MSW T-SAW300 Bedienungsanleitung

16 Oktober 2024

Makita 5603 Bedienungsanleitung

15 Oktober 2024

Black And Decker KS650 Bedienungsanleitung

15 Oktober 2024

Royal Catering RCBS-1650 Bedienungsanleitung

15 Oktober 2024

Royal Catering RCBS-1650.1ECO Bedienungsanleitung

15 Oktober 2024

Einhell TC-SM 2131 Dual Bedienungsanleitung

14 Oktober 2024

Einhell TC-AP 650 E Bedienungsanleitung

12 Oktober 2024

Makita DJV181Z Bedienungsanleitung

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Bedienungsanleitung

11 Oktober 2024