Ozito PXCPGC-018 Bedienungsanleitung

Ozito Rasenmäher PXCPGC-018

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXCPGC-018 (30 Seiten) in der Kategorie Rasenmäher. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/30
BRUSHLESS
LAWN MOWER
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage: 18V
Cutting Diameter: 300mm
Cutting Heights: 30, 50 & 70mm
No Load Speed: 3,300/min
Grass Catcher: 25 litres
Weight (Tool Only): 8.57kg
PXCLMS-018
Brushless Lawn Mower
Safety Key
ozito.com.au
STANDARD EQUIPMENT
WARRANTY
0518
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: grass catcher,
wheels, blade, cord clips, bearings etc..
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
12. Safety Key
1. Wheels
2. Battery Cover
3. Lower Handle
4. Grass Catcher Flap
5. Handle Securing Set
6. Upper Handle
7. Start/Stop Lever
8. Lock-off Button
9. Grass Catcher
10. Handle Securing Knob
11. Lifting Handle
BRUSHLESS LAWN MOWER
KNOW YOUR PRODUCT
1
9
2
10
3
11
4
12
5 6
7
8
1. ASSEMBLY
SETUP & PREPARATION
1. Place the upper handle over
the upper ends of the lower
handle.
1. Place the lower handle into
the threaded ends.
Fitting the Upper Handle
Fitting the Lower Handles
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
ACCESSORIES
2. From the handle securing
set, t the bolts through
the inner side of the lower
handle and then through the
holes in the upper handle.
3. Secure in place by screwing
the handle securing knobs
over the protruding ends of
the bolts.
2. Secure with a handle securing
knob.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
2. INSERTING AND REMOVING BATTERY
1. Open the battery cover.
1. Open the battery cover.
3. Insert the safety key.
(If the mower is not going to be
used immediately, do not insert
the safety key.)
2. Press the battery release tab and
remove the battery.
1. Lift up the catcher ap with one
hand and guide the catcher with
your other hand over the two
hooks on the mower housing.
3. To remove, raise the ap and lift
the catcher out.
2. Slide the battery into the mower
aligning the ribs so that it clicks
into place.
4. Close the battery cover.
3. Close the battery cover.
2. Lower the grass catcher and allow
it to sit in place. Lower the catcher
ap.
Inserting the Battery into the Mower
Removing the Battery from the Mower
Fitting and Removing the Grass Catcher
IMPORTANT! ONLY FIT AND REMOVE THE CATCHER
WHEN THE MOWER IS SWITCHED OFF AND THE
MOTOR HAS COME TO A STOP.
1. Locate cord on outside of handle. Secure the power cord from the switch
housing to the mower using 2 cable ties (supplied).
Note: Care should be
taken not to impinge
cord when folding down
the handle.
Securing the Cord
Ensure the cord follows the handle smoothly from the switch to the body of
the mower.
Note: The catcher ap is held
against the grass catcher by a spring.
Grass Catcher Assembly
1. To assemble the grass catcher
align the two halves and push
them together, one side at a
time. Ensure the two halves
click together around the entire
middle section.
2. Assemble the grass catcher
handle onto the opening on the
top half of the grass catcher.
The handle will click into
position when aligned and tted
correctly.
Ensure only 3.0Ah and above batteries are used.


Produktspezifikationen

Marke: Ozito
Kategorie: Rasenmäher
Modell: PXCPGC-018

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXCPGC-018 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Rasenmäher Ozito

Bedienungsanleitung Rasenmäher

Neueste Bedienungsanleitung fĂĽr -Kategorien-