Ozito PXBVS-3624 Bedienungsanleitung

Ozito Laubbläser PXBVS-3624

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXBVS-3624 (8 Seiten) in der Kategorie Laubbläser. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
BRUSHLESS
STANDARD EQUIPMENT
Motor Housing
Tubes
Collection Bag, Shoulder Strap
Guide Wheels, Wall Support
Bracket
Assembly Fasteners x 3
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 2 x 18V
No Load Speed: 8,000-15,000/min
Max. Air Speed: 240km/h
Max. Suction Volume: 740m/h
Max. Blowing Volume:230m/h
Mulching Ratio: 10:1
Collection Bag: 45 litres
Noise Rating: 102dB
Weight: 3.9kg
BLOWER
VAC
ozito.com.au
PXBVS-3624
WARRANTY
0623
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
OZITO. 25 Fox Drive, Dandenong South, Victoria 3175, Australia
KNOW YOUR PRODUCT SETUP & PREPARATION
1. ASSEMBLY
BRUSHLESS BLOWER VAC
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the
Ozito PXC Range.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
ACCESSORIES
a
12345678
11
12
9
10
14
15 16
13
Assembling the Tubes
1. Connect the lower tube onto
the upper tube. Ensure the two
halves latch together fully and
the guide lugs (a) sits correctly
in the recess.
2. Secure the tubes together with
the one-way assembly screw
using a at tip screwdriver (not
included).
3. Feed the assembled
suction tubes into the
motor housing. Push
together until they are
connected rmly.
4. Using the two thumb screws secure the suction tubes to the motor
housing.
Note: Integrated safety switches prevent the motor from operation
unless the suction tubes are fully assembled and secured to the motor
housing. If the tubes are not tted and secured against the motor
housing, the safety switch will trip and prevent the motor from working.
WARNING! ENSURE THE BLOWER VAC IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN RESULT
IN SERIOUS PERSONAL INJURY.
1. Guide Wheels
2. Lower Tubes
3. Upper Tubes
4. Bag Connector
5. Mode Selector
6. Front Handle
7. Speed Control
8. On/Off Trigger
9. Sure Grip Handle
10. Battery Seating x 2
11. Impeller Cover
12. Wall Support Bracket
13. Collection Bag
14. Shoulder Strap
15. Thumb Screws x 2
16. One-way Screw
WARNING! NEVER OPERATE WITHOUT THE LOWER
TUBES FITTED TO THE UPPER TUBES OTHERWISE RISK
OF INJURY.
2. CONTROLS
“SNAP”
PERFORMANCE
SPEED
TURBO
b
ab
PERFORMANCE
SPEED
TURBO
Attaching and Removing the Collection Bag
1. Attach the plastic connector on
the collection bag to the outlet in
the motor housing. Ensure that it
latches in place correctly.
2. Attach the collection bag
to the closest hole on the
suction tube.
Fitting the Wall Bracket
Slide the wall bracket onto the motor housing as far as it will go. Make
sure that the V-shaped cut-out faces the tubes.
3. To remove the collection bag, rst unhook it from the suction tube,
then press the release levers (b) simultaneously on both sides and
pull off the plastic connector away from the motor housing.
On/Off Trigger
Speed Control
• You can increase the air velocity by
pressing the SPEED button. Each bar on
the display will illuminate according to the
air velocity selected. Up to 4 bars can be
selected for the highest air velocity.
Note: If you press the SPEED button again
when the highest air velocity is active, the
equipment will return to the lowest air
velocity.
Note: To minimize noise and prolong
battery operating time, always use the speed
which is actually required and never run at a speed which is faster than
necessary.
•. If you need a higher air velocity for a
short time, you can press the TURBO*
button. Pressing the TURBO* button
will increase the air velocity providing
the maximum velocity. All the bars will
illuminate in the display.
*For best performance use with 2.5Ah
batteries and above.
Note: To minimize noise and prolong
battery operating time, never actuate the
turbo button any longer than necessary.
1. Squeeze the on/off trigger to
start. Motor will start after a
short delay.
2. To stop operation, release the
on/off trigger.
WARNING! DO NOT SWITCH ON IN ENCLOSED OR
POORLY VENTILATED SPACES OR IN THE PRESENCE OF
FLAMMABLE AND/OR EXPLOSIVE LIQUIDS, GASES AND
POWDERS.
Assembling the Guide Wheels
Squeeze the release levers (a) simultaneously on both side as you slide
the guide wheels into position on the lower tubes. Three xed locking
positions (b) are possible for setting the desired working position.


Produktspezifikationen

Marke: Ozito
Kategorie: Laubbläser
Modell: PXBVS-3624

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXBVS-3624 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Laubbläser Ozito

Bedienungsanleitung Laubbläser

Neueste Bedienungsanleitung fĂźr -Kategorien-