Ozito ECS-1935 Bedienungsanleitung
Ozito
Sägemaschine
ECS-1935
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito ECS-1935 (8 Seiten) in der Kategorie Sägemaschine. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
ELECTRIC
CHAINSAW
1900W 356mm
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1900W
Bar Length: 356mm (14”)
Cutting Length Max.: 325mm
Chain Speed: 15.5m/s
Oil Tank Capacity: 160ml
Noise Rating: 108dB
Weight: 4.8kg
ECS-1935
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: guide bar, chain and included accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty Ltd 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
Electric Chainsaw
Chain
0821
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Guide Bar
Guide Bar Cover
Electric Chainsaw
356m m Bar356m m Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar356mm Bar
1900W
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
3/8” LP
52
+
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
A B
1. Power cord
2. Cord retainer
3. Oil level window
4. Oil tank cap
5. Side cover
6. Chain tensioning dial
7. Chain brake
8. Bucking spikes
9. Side cover lock
10. Guide bar
11. Chain
12. Lock-off switch
13. On/Off trigger
14 Rear handle
15. Sprocket
16. Front handle
17. Chain tensioning pin
ELECTRIC CHAINSAW
ACCESSORIES
KNOW YOUR PRODUCT
1. GUIDE BAR & CHAIN
ASSEMBLY
1 2 3 4 5 6 7 8
12
10 11
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Fitting the Chain & Bar
1. Fully unscrew the side cover lock
by turning it in an anti-clockwise
direction.
2. Remove the side cover.
3. Fit the chain over the guide bar,
making sure that the cutters are
facing in the direction of rotation.
4. Place the guide bar and chain
in position, ensuring that the
chain is around sprocket (A).
Also ensure that the chain
tensioning pin (B) fits into the
guide bar. If it does not fit, it
can be adjusted slightly with
the chain tensioning dial. The
chain must not slip off the bar
when you do this.
15 1613
18. Guide bar cover
WARNING! ALWAYS WEAR HEAVY GLOVES WHEN
HANDLING THE CHAIN AS IT IS VERY SHARP AND CAN
CUT YOU WHEN IT IS NOT MOVING.
5. Pull the guide bar forward until
the chain is closely seated.
Make sure that all the drive
links are in the groove of the guide bar.
6. Place the side cover at a slight angle at the
beginning of assembly, then secure with the
side cover lock, turning several times for the
thread to engage.
Note: Do not fully tighten the side cover lock
until after adjusting the chain tension.
14
18
9
17
3mm gap is
the ideal tension
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar356mm Bar
1900W
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
3. Refit cap and clean any oil spillage.
4. Always fill the oil tank when the oil
level falls below the minimum mark
on the oil level window.
Note: Always check the oil level
window before and during the use of
the chainsaw.
1. Unscrew the side cover lock a few
turns to ensure it is loose.
2. Adjust the chain tension with the
chain tensioning dial. Rotating the dial
downwards increases the tension and
rotating the dial up decreases the chain
tension.
The tension is correct when the chain
can be pulled 3mm away from the
guide bar when using your finger and
thumb.
Do not over-tighten as this will
reduce the life of the chain and guide
bar.
Tensioning the Chain
SETUP & PREPARATION
2. CHAIN TENSION
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
WARNING! ALL THE CHAIN LINKS MUST LIE
PROPERLY IN THE GROOVE OF THE GUIDE BAR.
3. Tighten the side cover lock.
WARNING!: THE CHAIN SHOULD BE ADJUSTED
BEFORE FIRST USE, AGAIN AFTER 2 - 3 MINUTES
OF OPERATION AND RECHECKED AND ADJUSTED IF
NECESSARY AFTER EACH 30 MINUTES OF USE. TAKE CARE
NOT TO OVER TENSION THE CHAIN.
3. LUBRICATION
WARNING! ONLY USE OIL THAT IS EXPRESSLY
LABELLED “CHAIN BAR OIL”
Filling with Oil
1. Place the chainsaw on a flat
surface and remove the oil
tank cap.
2. Slowly fill the tank with chain
bar oil, ensuring that no dirt
enters the tank. The capacity
of the chain oil tank is 160ml.
WARNING! NEVER OPERATE THE CHAINSAW UNLESS
THE CHAIN AND BAR ARE LUBRICATED.
5. To check the lubricating system,
switch on the chainsaw and hold it
with the guide bar and chain above
some light coloured paper such as
newspaper. A steadily increasing
stain caused by oil spray shows the
lubricating system is working.
Note: Chain bar oil may leak if the tool
is left for long periods. This is normal.
If the tool is to be left unused for an extended time, drain the oil from the
tool. Refill before use.
Use a funnel (not supplied) and fill the tank slowly to prevent spilling the
oil. Do not overfill the tank.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Sägemaschine |
| Modell: | ECS-1935 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito ECS-1935 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sägemaschine Ozito
6 September 2024
6 September 2024
6 September 2024
5 September 2024
5 September 2024
18 August 2024
17 August 2024
16 August 2024
16 August 2024
14 August 2024
Bedienungsanleitung Sägemaschine
- Sägemaschine Brennenstuhl
- Sägemaschine Cotech
- Sägemaschine Makita
- Sägemaschine Royal Catering
- Sägemaschine Bosch
- Sägemaschine Flex
- Sägemaschine Parkside
- Sägemaschine Vonroc
- Sägemaschine AEG
- Sägemaschine Black And Decker
- Sägemaschine Cocraft
- Sägemaschine FERM
- Sägemaschine Ryobi
- Sägemaschine Skil
- Sägemaschine Topcraft
- Sägemaschine Trotec
- Sägemaschine Maestro
- Sägemaschine Prime3
- Sägemaschine Hilti
- Sägemaschine Bort
- Sägemaschine DeWalt
- Sägemaschine Einhell
- Sägemaschine Elu
- Sägemaschine Festool
- Sägemaschine Mafell
- Sägemaschine Maktec
- Sägemaschine Worx
- Sägemaschine Luxor
- Sägemaschine Tacklife
- Sägemaschine Hikoki
- Sägemaschine Hitachi
- Sägemaschine Hyundai
- Sägemaschine Fuxtec
- Sägemaschine Kress
- Sägemaschine Max
- Sägemaschine Metabo
- Sägemaschine Stanley
- Sägemaschine Atika
- Sägemaschine Güde
- Sägemaschine Power Craft
- Sägemaschine Scheppach
- Sägemaschine Workzone
- Sägemaschine Biltema
- Sägemaschine Meec Tools
- Sägemaschine Dremel
- Sägemaschine Fieldmann
- Sägemaschine King Craft
- Sägemaschine Proxxon
- Sägemaschine Westfalia
- Sägemaschine Remington
- Sägemaschine Husqvarna
- Sägemaschine Stihl
- Sägemaschine Dedra
- Sägemaschine DURO
- Sägemaschine Graphite
- Sägemaschine Pattfield
- Sägemaschine Silverline
- Sägemaschine Holzmann
- Sägemaschine MSW
- Sägemaschine Florabest
- Sägemaschine Germania
- Sägemaschine Stiga
- Sägemaschine Hammer
- Sägemaschine ACG
- Sägemaschine Greenworks
- Sägemaschine Huvema
- Sägemaschine Robust
- Sägemaschine Zipper
- Sägemaschine Yato
- Sägemaschine Baumr-AG
- Sägemaschine Genesis
- Sägemaschine BluCave
- Sägemaschine Morrison
- Sägemaschine Batavia
- Sägemaschine Evolution
- Sägemaschine Matrix
- Sägemaschine Dolmar
- Sägemaschine Bavaria
- Sägemaschine Brüder Mannesmann
- Sägemaschine Milwaukee
- Sägemaschine Narex
- Sägemaschine Toolcraft
- Sägemaschine Fein
- Sägemaschine AL-KO
- Sägemaschine EGO
- Sägemaschine CMI
- Sägemaschine IDEAL
- Sägemaschine Cobra
- Sägemaschine Verto
- Sägemaschine Craftsman
- Sägemaschine Powerplus
- Sägemaschine Alpha Tools
- Sägemaschine Echo
- Sägemaschine Elektra Beckum
- Sägemaschine Toledo
- Sägemaschine McCulloch
- Sägemaschine Yard Force
- Sägemaschine Sun Joe
- Sägemaschine Solo
- Sägemaschine Texas
- Sägemaschine Oregon Scientific
- Sägemaschine Ridgid
- Sägemaschine Porter-Cable
- Sägemaschine VARO
- Sägemaschine Spear & Jackson
- Sägemaschine Duro Pro
- Sägemaschine Erbauer
- Sägemaschine Ergofix
- Sägemaschine Exakt
- Sägemaschine Ferrex
- Sägemaschine FOM
- Sägemaschine Gamma
- Sägemaschine Gardenline
- Sägemaschine Global
- Sägemaschine Goon
- Sägemaschine Grizzly
- Sägemaschine Gude Pro
- Sägemaschine HURRICANE
- Sägemaschine Kompernass
- Sägemaschine Lux Tools
- Sägemaschine Max Bahr
- Sägemaschine Maxx
- Sägemaschine Qualcast
- Sägemaschine Tanaka
- Sägemaschine Toolson
- Sägemaschine Troy-Bilt
- Sägemaschine Avantco
- Sägemaschine Wolfcraft
- Sägemaschine Masport
- Sägemaschine Garland
- Sägemaschine Meister Craft
- Sägemaschine Clarke
- Sägemaschine Powerworks
- Sägemaschine Sovereign
- Sägemaschine Challenge
- Sägemaschine Challenge Xtreme
- Sägemaschine Truper
- Sägemaschine Łucznik
- Sägemaschine Vulcan
- Sägemaschine MacAllister
- Sägemaschine RIKON
- Sägemaschine Backyard Pro Butcher Series
- Sägemaschine Kreg
- Sägemaschine Jonsered
- Sägemaschine Einhell Bavaria
- Sägemaschine Proviel
- Sägemaschine Budget
- Sägemaschine Tryton
- Sägemaschine MTM
- Sägemaschine EFA
- Sägemaschine MyTool
- Sägemaschine McKenzie
- Sägemaschine Anova
- Sägemaschine Yellow Garden Line
- Sägemaschine Ergotools Pattfield
- Sägemaschine IKRA
- Sägemaschine FIXIT
- Sägemaschine Bestgreen
- Sägemaschine BGU
- Sägemaschine Power Smart
- Sägemaschine Ultranatura
- Sägemaschine TAURUS Titanium
- Sägemaschine Maxbear
- Sägemaschine Extralink
- Sägemaschine Stalco
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
12 Oktober 2024
12 Oktober 2024
11 Oktober 2024