Ozito DMM-080 Bedienungsanleitung
Ozito
Zementmischer
DMM-080
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito DMM-080 (6 Seiten) in der Kategorie Zementmischer. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
MULTI
PURPOSE
MIXER
1050W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1050W
Input: 230-240V ~ 50Hz
No Load Speed: 0-550/min
Max. Mixing Capacity: 80L
Mixing Paddle Length: 590mm
Mixing Paddle Diameter: 125mm
Mixing Paddle Thread: M14 x 2.0mm
Weight: 3.05kg
DMM-080
STANDARD EQUIPMENT
Multi-Purpose Mixer
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: carbon brushes, mixing paddle,
spanners, side handle, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Side Handle
1220
Mixing Paddle
Spare Brushes (Pair)
2 x Spanner
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. HANDLES
1 Collet
2 Side Handle
3 Mixer Housing
4 Handle Securing Knob
5 Rear Spade Handle
6 Forward / Reverse Lever
7 Variable Speed Dial
8 On/OTrigger
9 Lock-OButton
10 Mid Handle
MULTI-PURPOSE MIXER
1 2 3 4 5
6 7 8 9 10
11 12 13
11 Mixing Paddle
12 Spanner 19mm
13 Spanner 22mm
14 Spare Brushes (Pair)
ACCESSORIES
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING ASSEMBLY.
Side Handle
Spade Handle
2 Rotate the handle in a
clockwise direction to secure
in place.
2 Screw the securing knob
clockwise into the recess to
secure in place.
1 Align the side handle
with 1 of the 3 hole
position in the mixer
housing.
The side handle provides additional comfort, control, and guidance for
themixer.Thehandlecanbettedin3positionstosuittheuser.
The rear spade handle provides additional control and support when
using the tool. It can be attached either horizontally, vertically or should
you require it, diagonally.
1 Place the spade
handle into the
locating boss at the
angle you desire.
3 To change the angle,
loosen the securing
knob. Adjust the
handle angle
and retighten the
securing knob.
14
2. FITTING & REMOVING THE PADDLE 3. ON/OFF SWITCH
OPERATION
On/O Trigger
1 To start the mixer,
press and hold the
lock-obutton,then
squeezetheon/o
trigger.
2 Screw the mixing paddle
clockwise into the collet nut.
Note: Ensure the mixing paddle is tightly secured in place before
operating.
Note: Oncethetoolhasstartedyoucanreleasethelock-o
trigger.
2 Tostopthemixer,releasetheon/otrigger.
1 Align the mixing
paddle with the collet
at the front of the
mixer.
3 Using the supplied
spanners, hold the
collet nut in place
whilst tightening
the nut on the
mixing paddle in a
clockwise direction.
4 To remove the
mixing paddle,
loosen the nut on the
mixing paddle using
both of the supplied
spanners.
Thetoolhasavariablespeedtrigger,thefurtheryoudepresstheon/o
trigger the higher the speed of the mixer.
a.
b.
WARNING! TO REDUCE THE RISK OF ELECTRICAL
SHOCK, THE USE OF A RESIDUAL CURRENT DEVICE
(RATED 30mA OR LESS) IS RECOMMENDED.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Zementmischer |
| Modell: | DMM-080 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito DMM-080 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zementmischer Ozito
2 Januar 2024
16 November 2023
Bedienungsanleitung Zementmischer
- Zementmischer Parkside
- Zementmischer Hyundai
- Zementmischer Stanley
- Zementmischer Atika
- Zementmischer Scheppach
- Zementmischer Powerplus
Neueste Bedienungsanleitung für -Kategorien-
9 Mai 2024
8 Mai 2024
17 Januar 2024
27 Dezember 2023
28 November 2023
6 Mai 2023
30 Oktober 2022
8 Oktober 2022