Ozito BLV-2403 Bedienungsanleitung

Ozito Laubbläser BLV-2403

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito BLV-2403 (8 Seiten) in der Kategorie Laubbläser. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Collection Bag &
Shoulder Strap
3-IN-1 BLOWER
VAC-MULCHER
2400W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 230-240V ~ 50Hz
Power: 2400W
No Load Speed: 8000 - 14,000/min
Air Speed: 150 - 270 km/h
Mulching Ratio: 15:1
Air Volume Max.: 14mÂł/min
Collection Bag: 45L
Weight: 4.2kg
BLV-2403
WHAT’S IN THE BOX
Blower Vac
Blower Tubes
Vac Tubes and Wheels
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: Carbon brushes,
tubes, collection bag and shoulder strap.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0417
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Insert the upper blower tube into the matching lower blower
tube and push together until they are connected rmly.
1. Nose Guide Wheels
2. Lower Suction Tube
3. Upper Suction Tube
4. Secondary Handle
5. Shoulder Strap Hook
6. On/Off Switch
7. Variable Speed Dial
8. Bag Holding Points
9. Collection Bag
10. Lower Blower Tube
11. Upper Blower Tube
12. Intake Cover
13. Cord Retainer
BLOWER VACUUM-MULCHER
ACCESSORIES:
KNOW YOUR PRODUCT
1 2 3 4 5 6
8
7
9 10 11
12
1. TUBE ASSEMBLY
Assembling the Blower Tube
14. Shoulder Strap
WARNING!: ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
Assembling the Vacuum Tube
1. Slide the nose guide wheel
(axel with wheel) though the
lower tube and secure in
place with the other wheel as
shown.
2. Insert lower suction tube into the matching upper suction
tube being sure that the bag holding points are on the same
side.
ASSEMBLY
“CLICK”
BLOWER CONFIGURATION
13 14
1. To install the vacuum
tube you must remove the
protective intake cover. Start
by unscrewing the locking
knob.
4. Push the combined blower tubes into the housing fully.
2. MODE SETUP
SETUP & PREPARATION
Vacuum-Mulcher mode setup
3. Place the vacuum tube
assembly on the underside
of the motor housing as
shown and turn it clockwise
90 degrees.
2. Rotate the intake cover
anti-clockwise 90 degrees,
then pull away from the
housing.
4. Lock the vacuum tube in
place by screwing the knob
into the body of the blower.
5. Remove the blower tube,
then push the collection bag
onto the blower vac outlet.
6. Hang the bag fastening hooks onto the bag holding points
Blower mode setup
1. The protective intake cover must be assembled on the
suction opening when using as a blower.
2. Place the intake cover on the
suction opening as shown
then rotate clockwise 90
degrees.
3. Secure in position by
tightening the locking knob.
NOTE: Ensure the locking knob
is fully tightened otherwise the
motor will not start.
“CLICK”
NOTE: Ensure the collection
bag is pushed fully onto the
housing otherwise the motor
will not start.
NOTE: Ensure the locking
knob is fully tightened
otherwise the motor will not
start.
NOTE: Ensure the blower tube is pushed fully onto the housing
otherwise the motor will not start.
“CLICK”


Produktspezifikationen

Marke: Ozito
Kategorie: Laubbläser
Modell: BLV-2403

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito BLV-2403 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Laubbläser Ozito

Bedienungsanleitung Laubbläser

Neueste Bedienungsanleitung fĂźr -Kategorien-