OSD Audio SLK100 Bedienungsanleitung

OSD Audio Regler SLK100

Lesen Sie kostenlos die πŸ“– deutsche Bedienungsanleitung fΓΌr OSD Audio SLK100 (12 Seiten) in der Kategorie Regler. Dieser Bedienungsanleitung war fΓΌr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
Volume Controls
Picking the right Volume Control for your application: Two basic types:
Transformer Type with Impedance matching capability. This covers more than 90
percent of all installs utilizing a basic manual Volume control. It adds flexibility to your
system by allowing you to control the volume level in a dedicated room. It does not add
gain to the system but actually attenuates or decreases the sound (you around turning
the sound down). During setup you set the source volume to the optimum level then the
volume control turns the sound down to almost inaudible levels. Most impedance
matching volume controls do not turn the sound off completely unless they are equipped
with an off switch (found on our model SVC205).
The Impedance matching feature allows for maximum flexibility when designing a
system featuring multiple speakers direct from either an amplifier/receiver or from a
Speaker selector connected to an Amplifier/Receiver. In all cases it important to select
the best components for you particular application. OSD features multiple options in
Volume Controls, Amplifiers and even Speaker Selectors.
We also offer two styles, a rotating knob and slider style version. Both styles are
shipped with a white, ivory and almond matching color Decora insert, knob and outer
plate (Slider control shipped with Slider knobs)
We also offer a Impedance matching model that features a two way A/B switch for
either two speakers from a single source or a single speaker with dual source option.
Hereξ˜ƒisξ˜ƒanξ˜ƒexampleξ˜ƒofξ˜ƒImpedanceξ˜ƒmatchingξ˜ƒapplication aξ˜ƒusingξ˜ƒ ξ˜ƒ
singleξ˜ƒVolumeξ˜ƒControl.ξ˜ƒTheξ˜ƒOSDξ˜ƒAMP120 channelξ˜ƒisξ˜ƒ50ξ˜ƒwattξ˜ƒperξ˜ƒ ξ˜ƒξ˜ƒ8ξ˜ƒ
Ohmξ˜ƒAmplifierξ˜ƒthatξ˜ƒworksξ˜ƒbestξ˜ƒwhenξ˜ƒconnectedξ˜ƒwithξ˜ƒanξ˜ƒ8ξ˜ƒOhmξ˜ƒ
load.ξ˜ƒTheξ˜ƒSVC100ξ˜ƒVolumeξ˜ƒcontrolξ˜ƒisξ˜ƒusedξ˜ƒtoξ˜ƒconnectξ˜ƒtheξ˜ƒtwoξ˜ƒpairsξ˜ƒofξ˜ƒ
6.5β€ξ˜ƒin speakers in‐ceilingξ˜ƒ ξ˜ƒbothξ˜ƒratedξ˜ƒatξ˜ƒ ξ˜ƒ8 ohm.ξ˜ƒWhenξ˜ƒwiredξ˜ƒ ξ˜ƒparallelξ˜ƒ
theξ˜ƒimpedanceξ˜ƒbecomesξ˜ƒ ξ˜ƒ ξ˜ƒ Ξ© ξ˜ƒ ξ˜ƒ Ξ© ξ˜ƒ ξ˜ƒ ξ˜ƒ4 Ohm (8 /2 = 4 ). The Impedance
matchingξ˜ƒVCξ˜ƒjumperξ˜ƒswitchξ˜ƒisξ˜ƒsetξ˜ƒtoξ˜ƒ2X. Thisξ˜ƒ ξ˜ƒdoublesξ˜ƒtheξ˜ƒ ξ˜ƒ4 ohmξ˜ƒ
settingξ˜ƒbackξ˜ƒtoξ˜ƒthe that theξ˜ƒ ξ˜ƒ8 ohmξ˜ƒ ξ˜ƒisξ˜ƒoptimumξ˜ƒforξ˜ƒ ξ˜ƒperformanceξ˜ƒofξ˜ƒ
theξ˜ƒAMP120.ξ˜ƒAttemptingξ˜ƒtoξ˜ƒconnectξ˜ƒtwoξ˜ƒpairsξ˜ƒofξ˜ƒ ξ˜ƒ8 ohmξ˜ƒspeakersξ˜ƒ
withoutξ˜ƒtheξ˜ƒvolumeξ˜ƒcontrolξ˜ƒwouldξ˜ƒmeanξ˜ƒ ξ˜ƒ ξ˜ƒa 4 ohmξ˜ƒloadξ˜ƒonξ˜ƒanξ˜ƒ
amplifierξ˜ƒthatξ˜ƒwouldξ˜ƒcauseξ˜ƒanξ˜ƒeventualξ˜ƒoverloadξ˜ƒandξ˜ƒshutξ˜ƒdownξ˜ƒtoξ˜ƒ
protectξ˜ƒitself.ξ˜ƒ
Converselyξ˜ƒifξ˜ƒyouξ˜ƒselectedξ˜ƒone ourξ˜ƒofξ˜ƒ ξ˜ƒHighξ˜ƒCurrentξ˜ƒ ξ˜ƒAmplifiers likeξ˜ƒtheξ˜ƒ
AMP200ξ˜ƒthatξ˜ƒisξ˜ƒstableξ˜ƒdownξ˜ƒtoξ˜ƒ ξ˜ƒ ξ˜ƒa 2 ohmξ˜ƒloadξ˜ƒyouξ˜ƒcouldξ˜ƒwire pairsξ˜ƒ ξ˜ƒ3ξ˜ƒ
ofξ˜ƒ ξ˜ƒ8 ohmξ˜ƒspeakers inξ˜ƒ ξ˜ƒparallel impedanceξ˜ƒξ˜ƒwithξ˜ƒnoξ˜ƒ ξ˜ƒmatchingξ˜ƒneeded.ξ˜ƒ
Theseξ˜ƒHighξ˜ƒcurrentξ˜ƒ ξ˜ƒ ξ˜ƒ ξ˜ƒAmps are built toξ˜ƒhandleξ˜ƒξ˜ƒtheseξ˜ƒdemandingξ˜ƒloadsξ˜ƒ
(actualξ˜ƒ2.6Ξ©fromξ˜ƒtheξ˜ƒ ξ˜ƒ3 pairs) providingξ˜ƒ ξ˜ƒadditionalξ˜ƒflexibilityξ˜ƒinξ˜ƒyourξ˜ƒ
systemξ˜ƒdesign.
Wired Parallel 8Ξ©/2 =
16
R
Impedance Matching VC setting:
2X (2 x 4 Ohm = 8 Ohm)
8Ω
AMP120: 2 Channel 50 Watts (8 ohm)
AMP200: 2 Channel 125 Watts (4 ohm)


Produktspezifikationen

Marke: OSD Audio
Kategorie: Regler
Modell: SLK100

Brauchst du Hilfe?

Wenn Sie Hilfe mit OSD Audio SLK100 benΓΆtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Regler OSD Audio

Bedienungsanleitung Regler

Neueste Bedienungsanleitung fΓΌr -Kategorien-