Orion OOR-0S7 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Orion OOR-0S7 (4 Seiten) in der Kategorie Ölkühler. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
http://www.orion.ua
I
IN
NS
ST
TR
RU
UC
CT
TI
IO
ON
NM
MA
AN
NU
UA
AL
L
OIL RADIATOR
Model:
OOR-0S7 (7 fins)
OOR-0S9 (9 fins)
ENGLISH GB
http://www.orion.ua2
DEAR CUSTOMERS!
MANY THANKS FOR BUYING ORION OIL RADIATOR!
We really believe you will get the greatest pleasure from using this device for the years!
Please, read the user’s guide in detail before first using of this oil radiator.
CAUTION
1. Read and save this instruction manual for further reading.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
3. Children should be supervised to ensure that they do not play with the appliance.
4. The product is for household use only.
5. Connect the appliance to single phase AC supply of the voltage specified on the rating
plate.
6. In order to avoid overheating, do not cover the heater.
7. Never leave the heater unattended while it is in use. Always turn the product to the OFF
position and unplug it from the electrical outlet when not in use.
8. Extreme caution is necessary when any heater is used by or near children, invalids or
elderly person and whenever the heater is left operating and unattended.
9. Do not run cord under carpeting and do not cover cord with throw rugs, runners or the like.
Arrange cord away from traffic area and where it will not be tripped over.
10. Do not operate the heater with a damaged cord or plug, or after the heater malfunctions,
has been dropped, or damaged in any manner. If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent or a similarly qualified person to avoid a
hazard.
11. Avoid the use of an extension cord as this may overheat and cause a risk of fire.
12. Use the heater in a well-ventilated area. Do not insert or allow objects to enter any
ventilation or exhaust opening. To prevent a possible fire, do not block air intakes or
exhaust openings in any manner. Do not use on soft surfaces, like a bed, where openings
may become blocked. Use the heater on flat, dry surfaces only.
13. Do not place this heater near flammable materials, surfaces or substances, as there may
be a risk of fire. Keep the above flammable materials, surfaces or substances at least 1m
from the front of the product and keep them away from the sides and rear.
14. Do not use the heater in any areas where petrol, paint or other flammable liquids are stored
e.g. Garages or workshops as a hot, arcing or sparking parts inside the heater.
15. Don’t use this heater in the immediate surroundings of a bath, a shower or a swimming
pool. Never locate the heater where it may fall into bathtub or other water container.
16. This heater is hot when in use. To avoid burns and personal injury, do not let bare skin
touch hot surfaces. If provided, use handles when moving the product.
17. Be sure that no other appliances are in use on the same electrical circuit as your product as
an overload can occur.
18. This heater is filled with a precise quantity of special oil.
19. Repair requiring opening of the oil container are only to be made by the manufacturer or his
service agent who should be contacted if there is an oil leakage.
20. Regulations concerning the disposal of oil when scrapping the appliance have to be
followed.
21. The heater should not be used in a room, of which the floor area is less than 5 M 2.
22. The cord shouldn’t be placed nearby the hot surface of the appliance.
http://www.orion.ua3
PARTS DESCRIPTION
ASSEMBLY
The heater is packaged with the feet unattached. You must attach them before operating the
heater.
WARNING: Do not operate without feet attached. Do operate the heater only in upright
position (feet on the bottom, controls on the top), any other position could create a
hazardous situation.
1. Turn the heater upside down.
2. Position the wheel base assemblies between the end fins.
3. Attach them to the heater using the U-bolts and wing nuts supplied.
4. Tighten the wing nuts.
5. Turn the heater the right way up.
OPERATION YOUR OIL RADIATOR
1. Place the heater on the floor at least 90 cm away from the wall and any other objects such
as furniture, curtains or plants. (Make sure the power supply used corresponds to the one
on the rating label).
2. Set all the controls to OFF position and insert the plug into a socket-outlet with well
grounded. Be sure that plug fits firmly.
3. Rotate the thermostat knob clockwise to MAX position and switch the heater on as follow:
the switch I for low heat, the switch II for medium heat and both switches on for high heat.
1. Carry handle
2. Thermostat knob
3. Power switch
4. Cord storage
5. Radiant fins
6. Castor
1
2
3
5
4 6


Produktspezifikationen

Marke: Orion
Kategorie: Ölkühler
Modell: OOR-0S7

Brauchst du Hilfe?

Wenn Sie Hilfe mit Orion OOR-0S7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten