Orient Technologies R880NP Bedienungsanleitung

Orient Technologies Drucker R880NP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Orient Technologies R880NP (34 Seiten) in der Kategorie Drucker. Dieser Bedienungsanleitung war für 62 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/34

UUSER’S MANUAL

Receipt Printer

BTP-R880NP

Shandong New Beiyang Information Technology Co., Ltd

BTP-R880NP User’s Manual

Declaration

Information in this document is subject to change without notice. SHANDONG NEW BEIYANG

INFORMATION TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”) reserves the right to

improve products as new technology, components, software, and firmware become available. If users need

further data about this product or have any doubt about safety issues that might arise from using it, please

feel free to contact your local dealer.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose without the express written permission of SNBC.

Printed in China

Version 1.0

Trademarks

Our registered trademarks: and

Warning and Caution

Warning: Items shall be strictly followed to avoid damages to body and devices.

Caution: Items with important information and prompts for operating the printer.

The control system of SNBC has been approved of the following certification:

ISO9001 quality control system certification

ISO14001 environmental control system certification

OHSAS18001 profession health safety control system certification

IECQ QC080000 hazardous material process control system certification

BTP-R880NP has been approved of the following certification:

BTP-R880NP User’s Manual

General Safety Information

Before installing and using the printer, please read the following items carefully.

1. Safety instructions

Don’t touch the tear bar of printer.

The print head is a thermal element and it is at high temperature during printing or just after

operation, therefore please do not touch it and its peripherals for safety reasons.

The thermal head is an ESD-sensitive device. To prevent damage, do not touch either its

printing part or connecting parts.

2. Caution

1) Install the printer on a flat and stable place.

2) Reserve adequate space around the printer so that convenient operation and maintenance can be

performed.

3) Keep the printer away from water source.

4) Do not use or store the printer in a place exposed to heat of fire, moisture, serious pollution and direct

sunlight.

5) Do not place the printer on a place exposed to vibration or impact.

6) No dew condensation is allowed to the printer. In case of such condensation, do not turn on the power

until it has completely evaporated.

7) Connect the DC adapter to an appropriate grounding outlet. Avoid sharing a single electrical with large

power motors and other devices that may cause the fluctuation in voltage.

8) Disconnect the DC adapter when the printer is not used for a long time.

9) Don’t spill water or other materials on the printer. If this happens, turn off the power immediately.

10) Do not allow the printer to start printing when there is no recording paper installed, otherwise the print

head and platen roller will be damaged.

11) To ensure quality print and normal lifetime, use recommended or good quality paper.

12) Shut down the printer when c to avoid damage to the onnecting or disconnecting interfaces connectors

control board.

13) Set the print darkness to a lower grade as long as the print quality is acceptable. This will help to keep

the print head durable.

14) The printer should only be disassembled or repaired by a technician, who is certified by the

manufacturer.

15) Keep this manual safe and at hand for ready reference.

16) The following content about cutter only applies to printers with cutter.

Produktspezifikationen

Marke:	Orient Technologies
Kategorie:	Drucker
Modell:	R880NP
USB Anschluss:	Ja
WLAN:	Ja
Gewicht:	1700 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Verkabelt & Kabellos
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	5 - 45 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 90 %
Typ:	POS-Drucker
Temperaturbereich bei Lagerung:	-40 - 60 °C
Luftfeuchtigkeit bei Lagerung:	20 - 93 %
Abmessungen (BxTxH):	145 x 200 x 145 mm
Maximale Auflösung:	203 x 180 DPI
Standard-Schnittstellen:	USB, Wireless LAN
Drucktechnologie:	Thermodruck
Puffergröße:	64 KB
Druckgeschwindigkeit (metrisch):	230 mm/sek
Unterstützte Papierbreite:	82.5 ± 0.5, 80 ± 0.5, 76 ± 0.5, 69.5 ± 0.5, 57.5 ± 0.5 mm
Maximaler Rollendurchmesser:	83 mm
Maximum Druckweite:	80 mm
integrierte Barcodes:	1D, 2D, CODABAR (NW-7), EAN13, EAN8, ITF-14, MaxiCode, PDF417, QR Code, UPC-A, UPC-E