Optoma HD806 Bedienungsanleitung

Optoma Videostrahl HD806

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Optoma HD806 (50 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/50

English

Table of contents

Table of Contents ...................................................................................1

Usage Notice ..........................................................................................2

Safety Information .........................................................................................2

Precautions....................................................................................................3

Eye Safety Warnings .....................................................................................5

Introduction.............................................................................................6

Product Features ...........................................................................................6

Package Overview.........................................................................................7

Product Overview ..........................................................................................8

Main Unit ................................................................................................................ 8

Control Panel ......................................................................................................... 9

Connection Ports ................................................................................................. 10

Remote Control .................................................................................................... 11

Installation ............................................................................................12

Connecting the Projector .............................................................................12

Powering On/Off the Projector.....................................................................13

Powering On the Projector ................................................................................... 13

Powering Off the projector ................................................................................... 14

Warning Indicator ................................................................................................. 14

Adjusting the Projected Image.....................................................................15

Adjusting the Projector’s Height ........................................................................... 15

Adjusting the Projector’s Zoom / Focus ............................................................... 16

Adjusting Projected Image Size ........................................................................... 16

User Controls ....................................................................................... 17

Control Panel & Remote Control .................................................................17

On-screen Display Menus ...........................................................................20

How to operate .................................................................................................... 20

Menu Tree ............................................................................................................ 21

Image ................................................................................................................... 22

Display ................................................................................................................ 26

Setup .................................................................................................................... 29

System ................................................................................................................. 32

Appendices...........................................................................................36

Troubleshooting ........................................................................................... 36

Image Problems .................................................................................................. 36

Intermission Problems ........................................................................................ 38

Projector Status Indication .................................................................................. 39

Remote Control Problems ................................................................................... 40

Replacing the Lamp.....................................................................................41

Compatibility Modes ....................................................................................42

RS232 Commands and Protocol Function List............................................43

Ceiling Mount Installation ............................................................................46

Optoma Global Ofces ................................................................................47

Regulation & Safety notices ........................................................................49

Usage Notice

Safety Information

The lightning ash with arrowheard within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous volt-

age” within the product’s enclosure that may be of sufcient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of import operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Inter-

ference-Causing Equipment Regulations.

Important Safety Instruction

1. Read these instructions –before using this projector.

2. Keep these instructions –for future reference.

3. Follow all instructions.

4. Install in accordance with the manufacturer’s instructions

A. Do not block any ventilation openings

To ensure reliable operation of the projector and to protect it from over-

heating, put the projector in a position and location that will not inter-

fere with its proper ventilation. For example, do not place the projector

on a bed, sofa, carpet, or similar surface that may block the ventilation

openings. Do not put it in an enclosure, such as a bookcase or a cabinet

that may keep air from owing through its ventilation openings.

B. Do not use this projector near water or moisture. To reduce the risk

of re or electric shock, do not expose the projector to rain or moisture.

, such as radiators, heaters, C. Do not install near any heat sources

stoves or other apparatus (including ampliers) that produce heat.

5. Clean only with a dry cloth.

6. Only use attachments/accessories specied by the manufacturer.

7. Refer all servicing to qualied service personnel. Servicing is required

when the projector has been damaged in any way:

▀■ Such as power supply cord or plug is damaged.

▀■ Liquid has been spilled or objects have fallen into the apparatus.

▀■ The projector has been exposed to rain or moisture, does not oper-

ate normally, or has been dropped.

Do not attempt to service this projector yourself. Opening or removing

covers may expose you to dangerous voltages or other hazards. Please

call Optoma to be referred to an authorized service center near you.

8. Do not let objects or liquids enter the projector –as they may touch

dangerous voltage points or short-out parts that could result in a re or

electric shock.

9. See projector enclosure for safety related markings.

10. The projector should not be adjusted or repaired by anyone except

properly qualied service personnel.

English

Usage Notice

Precautions

Please follow all warnings, precautions and mainte-

nance as recommended in this user’s guide.

When the lamp reaches

the end of its life, the

projector will not

turn back on until the

lamp module has been

replaced. To replace

the lamp, follow the

procedures listed under

“Replacing the Lamp”

section on page 41.

▀■ Warning- Do not look into the projector’s lens when the

lamp is on. The bright light may hurt your

eyes.

▀■ Warning- To reduce the risk of re or electric shock, do

not expose this projector to rain or moisture.

▀■ Warning- Please do not open or disassemble the projec-

tor as this may cause electric shock.

▀■ Warning- When replacing the lamp, please allow unit to

cool down, and follow all replacement instruc-

tions. See page 41.

▀■ Warning- This projector will detect the life of the lamp

itself. Please be sure to change the lamp when

it shows warning messages.

▀■ Warning- Reset the “Lamp Reset” function from the on-

screen display “System|Lamp Setting” menu

after replacing the lamp module (refer to page

35).

▀■ Warning- When switching the projector off, please

ensure the cooling cycle has been completed

before disconnecting power. Allow 90 seconds

for the projector to cool down.

▀■ Warning- Do not use lens cap when projector is in

operation.

▀■ Warning- When the lamp is approaching to the end

of its life time, the message “Replacement

suggested” will show on the screen. Please

contact your local reseller or service center to

change the lamp as soon as possible.

NoteNote

Produktspezifikationen

Marke:	Optoma
Kategorie:	Videostrahl
Modell:	HD806
Bildschirmdiagonale:	0.95 "
Marktpositionierung:	Heimkino
Eingebaute Lautsprecher:	Nein
WLAN:	Nein
Gewicht:	4.5 g
Übertragungstechnik:	Kabelgebunden
Betriebstemperatur:	5 - 35 °C
Fernbedienung enthalten:	Ja
Stromverbrauch (Standardbetrieb):	435 W
Anzahl HDMI-Anschlüsse:	2
Stromverbrauch (Standby):	14 W
Temperaturbereich bei Lagerung:	-20 - 60 °C
Geräuschpegel:	32 dB
Energiebedarf:	100 - 240V, 50 - 60Hz
Analoges Signalformatsystem:	NTSC, PAL, SECAM
RS-232 port:	1
Composite Video-Eingang:	1
Komponenteneingang Video (YPbPr/YCbCr):	1
3D:	Ja
DVI Anschluss:	Ja
Lampentyp:	UHP
Full-HD:	Ja
Geräuschunterdrückung:	Ja
Kabelsperre-Slot:	Ja
Slot-Typ Kabelsperre:	Kensington
Abmessungen (BxTxH):	406 x 310 x 117 mm
Integrierter Kartenleser:	Nein
Projektorhelligkeit:	2000 ANSI Lumen
Projektionstechnologie:	DLP
Anzahl der Farben:	1,073 Milliarden Farben
Trapezkorrektur, vertikal:	5 °
Projektionsflächenkapazität:	30 - 300 "
Projektionsabstand:	1.5 - 10 m
Fokus:	Manuell
Serielle Schnittstelle:	RS-232
Seitenverhältnis:	16:9
Kompatibilität:	UXGA, SXGA+, WXGA, SXGA, XGA, SVGA, VGA, VESA, PC / Macintosh
Lebensdauer der Lichtquelle:	3000 h
Lampenleistung:	300 W
Typ der Lichtquelle:	Lampe
Brennweitenbereich:	39.12 - 46.94 mm
Anzahl S-Video-Eingänge:	1
HD-Ready:	Nein
TV Tuner integriert:	Nein
Einheitlichkeit:	80 %
Zoomverhältnis:	1.2:1
Offset:	136 %
Projektionsverhältnis:	1.85 - 2.22:1
Verbrauch (Energiesparmodus):	375 W
Gewicht (imperial):	10 Pfund
Fokusbereich der Linse:	F2.6 - 2.82
Digitale Grammatikkorrektur:	Ja
Display-Auflösung:	1920 x 1080 Pixel
Ethernet/LAN:	Nein