One For All URC7955 Bedienungsanleitung

One For All Fernbedienung URC7955

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für One For All URC7955 (2 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
A SIMPLESET
SimpleSet is a quick and easy way of setting up the remote to control the most popular
brands of each device type with only a few key presses, typically in under a minute per
device. The fi rst step is to select which device you are going to set up. The following is a list
of Device Modes on the remote control, and the Device types that can be set up on that
mode:
Device Mode Type of device
TV TV, HDTV, LED, LCD, Plasma, Projector
STB Set Top Box, Satellite Receiver, Cable
Converter, Freeview, DVB-T, IPTV
BLU Blu-ray, DVD, DVD Home Cinema, VCR,
Laser Disk
MEDIA Digital Media Receiver, Streamer, Game
Console*
AUD Audio, AV Receiver, Amplifi er, Tuner, Sound
Bar, Active Speaker System
* The One For All remote can only control games consoles operated by Infra-Red, either
directly or via an adapter. Consoles that are controlled by Bluetooth only cannot be
operated.
For each Device type, there is a list of the top brands, each with a number assigned to it,
for example 6 for a Samsung TV. Locate your device and brand in the list that follows:
To set up your device
1. Turn on your device (not on standby) and point the OFA remote towards it.
2. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode will stay lit.
3. Press the DEVICES key repeatedly until the LED for the device you
want to set up is lit.
4. Hold down the digit for your brand and device as listed above
(e.g. 6 for Samsung TV).
5. The remote will send Power every 3 seconds until your device switches off .
6. As soon as your device switches o ff , release the digit.
7. The LED will blink twice and go out. The remote should now operate
your device.
* If you fi nd one or more keys do not work as you expect, start again at step 1 – the remote will start with the next
code in the memory.
B SET UP BY CODE
If your brand is not listed in section A, you can set up your device by trying codes
individually. To do this:
1. Turn your device on (not on standby).
2. Locate the brand of your device in the code list (pages 160-176).
Codes are listed by Device Type and Brand.
3. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode will stay lit.
4. Press the DEVICES key repeatedly until the LED for the device you
want to set up is lit.
5. Enter the fi rst 4 digit code listed for your brand (e.g. 0556 for a
Bennett TV).
6. The LED will blink twice and go out.
7. Now aim the remote towards your device and press the POWER key.
8. If the device turns off , your remote is ready to use. If not, repeat steps 3-7
with the next code in the list.
* Some codes are quite similar. If you fi nd that one or more keys do not operate as you expect, try again from step 3
with the next code in the list.
Thank you for purchasing the One For All Smart Control.
Now you can control all of your Audio/Video devices with a single remote, while enjoying
extra features such as the ability to combine devices in a single Activity Mode, sending
multiple commands on a single key press (macros) and being able to customise the
remote control to your exact requirements.
There is also a handy companion app for iPhone and Android phones which will allow
you to keep your remote up to date with the latest devices and codes. It also off ers you an
alternative way to set up your remote and store the settings.
To get started with your new remote, the fi rst step is to set it up to control all of your
Home Cinema devices.
A SIMPLESET A SIMPLESET
1 Alba / Bush / Goodmans
2 Grundig
3 LG
4 Panasonic
5 Philips
6 Samsung
7 Sharp
8 Sony
9 TCL / Thomson
0 Toshiba
1 BSkyB / Sky Ireland /
Orange
2 Canal+ / CanalSat / Digital+
3 Dream Multimedia /
TechniSat
4 DStv / Multichoice / Foxtel /
Sky New Zealand
5 freebox / Tricolor TV / Vu+
6 Humax
7 Samsung
8 Sky Italia / SFR / Neuf TV
9 Sky Deutschland / Österreich /
T-Home / Deutsche Telekom
0 UPC / Cablecom / UPC Direct /
Virgin Media
BLU – Blu-ray, DVD
1 Denon
2 Harman/Kardon
3 JVC / LG
4 Marantz / Philips
5 Onkyo
6 Panasonic / Technics
7 Pioneer
8 Samsung
9 Sony
0 Yamaha
STB – Sat, Cable, DVB-T
1 Denon, Harman/Kardon
2 JVC
3 LG
4 Panasonic
5 Philips
6 Pioneer
7 Samsung
8 Sony
9 Toshiba
0 Yamaha
AUD – AV Receiver, Amp, Tuner,
Sound Bar, Speaker Systems
TV
MEDIA – Games Consoles (5 & 8),
Media Players
1 Apple
2 Asus
3 Dune
4 Emtec / A.C.Ryan / DVICO /
Fantec / iconBIT / iNext
5 Microsoft
6 Popcorn Hour / Philips
7 Roku / Sky Austria / Sky
Deutschland / Sky Ireland /
Sky UK
8 Sony
9 Sumvision
0 Western Digital
HOW TO SET UP YOUR REMOTE
HOW TO SET UP YOUR REMOTE HOW TO SET UP YOUR REMOTE HOW TO SET UP YOUR REMOTE
URC 7955
ENGLISH SIMPLE SET UP GUIDE
WELCOME, PREPARE YOUR
REMOTE FOR INSTALLATION
Open the battery door.
Insert 4 AAA batteries.
URC7955
RDN-1080716
710834
ENGLISH
PRODUCT DISPOSAL
EUROPEAN DIRECTIVE 2002/96/EC
The crossed out wheeled bin symbol on this product
ensures that this product is manufactured using high
quality components that can be recycled and reused
according to European Directive 2002/96/EC. Please do
not dispose this product with your normal household
waste but inform yourself about the local separate
collection for electrical and electronic products to
dispose this product correctly. This will help preventing
potential negative eff ects on the environment and/or
human health.
BATTERY DISPOSAL AND SAFETY
EUROPEAN DIRECTIVE 2006/66/EC
Please do not dispose your batteries with your normal
household waste but inform yourself about the local
separate collection for empty batteries to dispose them
correctly. This will help preventing potential negative
eff ects on the environment and/or human health.
Keep batteries away from fi re, out of direct sunlight, and
away from other sources of heat.
UNIVERSAL ELECTRONICS INC/ONE FOR ALL warrants to
the original purchaser that this product will be free from
defects in materials and workmanship under normal
and correct use for a period of one (1) year from the date
of original purchase. This product will be replaced free
of charge if it has been proven to be defective within
the one (1) year warranty period. This warranty does not
cover cartons, carrying cases, batteries, broken or marred
cabinets or any other item used in connection with the
product. Any further obligation than listed above is ex-
cluded. Please notice that p1-we need your purchase receipt
so that p1-we may establish your eligibility for service. If
you have bought this product for purposes which are
not related to your trade, business or profession, please
remember that you may have legal rights under your
national legislation governing the sale of consumer
goods. This guarantee does not aff ect those rights.
UK
www.oneforall.com
Ireland
www.oneforall.com
South Africa
0861100551
support@oneforall.co.za
www.connoisseur.co.za
www.oneforall.com
New Zealand
0800 1425569
sales@amber.co.nz
www.amber.co.nz
www.oneforall.com
Australia
1 300 888 298
ofa.support@ambertech.com.au
www.ambertech.com.au
www.oneforall.com
Universal Electronics BV –
Europe & International
P.O. Box 3332, 7500 DH Enschede
The Netherlands
KEY TABLE
DEVICES – Scroll through
the devices your remote
is set up to control MAGIC – Used to set up
your remote
POWER – Power on/o
INFO – Displays info of
current playback
FAV –
Favourite Channels
BACK – Back one step
in the Menu of the
current device
ACTIVITY – Scrolls
through up to 3
Activity Modes –
Watch TV, Watch
Movie and Listen to
Music . See Activities
for details.
EXIT – Exit from the
Menu of the current
device
VOL – Volume Up, Down
and Mute
MENU – Shows the menu
of the current device
GUIDE – TV Guide, EPG
SMART – Access internet
and Smart features of
your TV or internet-
connected device
+/- – Channel Up and
Down
PP – Previous
Program, Last Channel
Red, Green, Yellow,
Blue – Fastext/Quick
access keys
PLAYBACK – Playback
keys for the current
device
NETTV – Access TV
Streaming - See Net TV
Feature
LIST – Displays a list of
recorded programmes
AV – Select the input on
the current device
Your One For All remote control can learn any function from any other working remote
control. This can be useful if you are missing one or more functions from your original
remote control and would like to add them to the Smart Control. You can learn onto any
key except Magic, Devices or Activity.
You can also learn a complete device if you can’t find a code.
To learn, firstly make sure you have all your original remote controls to hand, and that they
have working batteries in. To learn functions, the original remote should be
approximately 3cm from the OFA remote, pointing towards it as shown below:
1. Hold down MAGIC until the LED under the device blinks twice. The LED
under the current mode will stay lit.
2. Using the DEVICES key, make sure the LED for the device you want to learn
functions on is lit.
3. Press 975 – the LED will blink twice.
4. Press and release the key you want to learn a function onto (for example
the FAV key) – The Watch TV and Listen To Music LEDs will light up.
5. Press and release the key on the original remote.
6. The LED under the device will blink twice to indicate the key has been learned correctly.
7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple
remotes, but only one function per key.
8. When you have learned all the functions you require, press and hold the
MAGIC key until the LED blinks twice and turns off.
Hints
• If the LEDs shows one long blink at step 6, the function was not learned correctly, please try again
from step 4.
• If you find one or more keys don’t work properly after set up, you can re-enter the learning mode
at any time by repeating the procedure from step 1.
If you always use one device to control volume, for example your TV or an AV Receiver, you
can set up the Smart Control to always control that device, regardless of which device your
remote is controlling.
To do this:
1. Hold down MAGIC until the LED under the device blinks twice. The LED under the
current mode will stay lit.
2. Press 993 – the LED will blink twice.
3. Use the DEVICES key to select the Device you want to lock the Volume to.
4. Press MAGIC once – the LED will blink twice and volume is now locked.
To unlock the volume and set every device back to controlling its own volume, the
procedure is:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode will stay lit.
2. Press 993 – the LED will blink twice.
3. Press VOLUME UP – the LED will blink four times and Volume is now unlocked.
Please note that Volume Lock only applies in Device Mode – Activities are unaffected.
2. Press 995 – the LED will blink twice.
3. Next select the key you want to program the Macro on.
4. Now use the DEVICES key to select the device you want the first
function of the Macro to come from, for example TV.
5. Next, press the key you want to include in the Macro, for example
the AV key.
6. Repeat steps 4 (if necessary), and 5 to add more keys to the Macro. You can include up
to 15 key presses.
7. To store the Macro, hold down the MAGIC key until the LED blinks
twice.
* Remember to press the keys in the same order you would using your original remotes – so if you pressed AV on the TV
remote and then Play on the Blu-ray remote to watch a movie, do it in the same order on the Smart Control.
* If the LED shows a long blink when you press a key in steps 4 or 5, you have entered too many keys, please try again.
TO DELETE A MACRO
If you want to remove a macro from a key, please perform the following:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode will stay lit.
2. Press 995 – the LED will blink twice.
3. Press the key the macro is programmed on.
4. Now hold down the MAGIC key until the LED blinks twice –
the Macro is deleted.
PROGRAM A MACRO
You can program any key on your OFA remote (except Magic and Devices) to send
multiple commands on a single press –a Macro. This can be useful for controlling multiple
devices to put them in a certain state – for instance you could put your TV on HDMI 1
and press Play on the Blu-ray player to start watching a movie. A key programmed with a
Macro will send the same Macro regardless of the device mode, so it is best to select a key
you don’t use.
To program a macro, the procedure is as follows:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode will stay lit.
The Smart Control features a “NETTV” key for viewing digital TV, streamed over the inter-
net. If your original remote control already had a key for this - for example many newer TVs
have a Netflix key - then this key will perform exactly the same as the key on your original
remote. However if you did not have a key like this, but still had the ability to watch a
streaming service, you can use this key as a shortcut by programming a macro on it. Most
AV devices which are connected to the internet, such as Smart TVs or streaming Set Top
Boxes have one or more applications they can run to access TV viewing via the internet.
Examples of these would be Netflix, YouTube, Amazon Prime, BBC iPlayer or similar.
To program the macro, you first need to know the device you use to access the service,
and then the sequence of keys you need to press to always bring up the service you prefer,
For example, some Panasonic TVs will start Netflix by pressing the Apps key, then Menu
Down Twice, and finally the OK key. Or on an Apple TV, the sequence is Menu, Menu Down
and OK.
Once you have determined the sequence for your device, follow these steps:
1. Sit in front of your device with It switched on (not on standby)
2. Hold down the NETTV key until the LED blinks twice and stays lit
3. Use the DEVICES key to select the device you want to use for the
NETTV macro (e.g. TV)
4. Now perform the sequence of keys exactly as would normally. The
remote will operate your device and the macro is recorded in real
time - so if it normally takes a few seconds for your device to react
don’t worry.
5. One you have finished the sequence - and the Streaming Service
has started on your device - hold down the NETTV key until the LED
blinks twice and goes out. The macro is now stored.
Tips
• Make sure the Smart Control Is operating the device in question before programming
• If you find the Macro doesn’t work as expected, you can just repeat the same
sequence to reprogram
• When programming, wait for your device to respond first, the remote will remember
the timing
• The NETTV macro is tied to one device, remember to make sure you are watching the
correct device.
MACROS ON ACTIVITIES
Another handy feature of the Smart Control is to put Macros on Activities; you could for
example program the Watch TV Activity to send a Macro to turn on the TV and Set Top
Box when selected. To do this, simply use the Activity key to select the Activity in step 3 of
the procedure “Program a Macro”. Next time you use the Activity, the Macro will be sent 3
seconds after you select it using the Activity key.
If you want to delete a Macro from the Activity, select it during step 3 of “To Delete a
Macro”.
Your One For All Smart Control contains codes for all popular devices and brands, but new
codes are added to our online database every day. Using the One For All App on
your iPhone or Android phone will allow you to upgrade any new codes into your
remote using Bluetooth Smart, also known as Bluetooth Low Energy*. This will ensure that
the remote will never become obsolete. You can also use the app to set up all devices,
giving you the ability to enter the model numbers of your equipment to get the right code
first time. It can also help with selecting the right inputs for your Activities. *
* Dependent on device and commands available.
If you would like to download the app, follow the links below:
* Please ensure your phone is compatible with Bluetooth Smart. A list can be found by scanning the QR code above.
Universal Electronics, declares that this product is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
A copy of the EC declaration of Conformity is available at http://www.oneforall.com/DOC_URC7955
One For All is a registered trademark of Universal Electronics B.V.
P.O. Box 3332, 7500 DH, Enschede, The Netherlands
LEARNING MACROS
MACROS
THE NETTV FEATURE
VOLUME LOCK THE NETTV FEATURE
THE OFA APP
www.ofa.com/smartcontrol
An Activity is a grouping of two or more devices into a single mode based upon what
you’re doing while using your remote - for example TV and Set Top Box can be combined
together into a Watch TV mode. In this mode keys will control only the relevant device, so
in this example the Volume keys would control the TV, but the channel keys would control
the Set Top Box.
The OFA Smart Control features 3 Activity Modes; Watch TV, Watch Movie and Listen To
Music. Each of these modes has a choice of devices to combine.
These are:
WATCH TV
Combination 1: TV + STB (Default)
Combination 2: TV + STB + AUD
Combination 3: TV + AUD
WATCH MOVIE
Combination 1: TV + BLU (Default)
Combination 2: TV + BLU + AUD
Combination 3: TV + MEDIA
Combination 4: TV + MEDIA + AUD
LISTEN TO MUSIC
Combination 1: TV + AUD + MEDIA (Default)
Combination 2: AUD + BLU
Combination 3: AUD only
TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode will stay lit.
2. Using the DEVICES key, make sure the LED for the device you want
to delete functions from is lit.
3. Press 976 – the LED will blink twice.
4. Press the key to delete twice – the LED will blink twice.
Repeat the above procedure for each key you want to delete.
If you set up the default devices for any Activity on the remote (for example a TV and STB
for Watch TV) that Activity will be set up automatically on the remote. If you would like to
change to a different combination, the procedure is as follows:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode will stay lit.
2. Use the ACTIVITY key to scroll through the Activities until the
one you want to set is flashing.
3. Press the number of the combination you want to set – e.g 2
for TV + STB + AUD in Watch TV.
4. The LED will blink twice and go out.
To access the Activities, simply press the ACTIVITY key to scroll through until the desired
one is lit. You can return to controlling by device by using the DEVICES key.
AV Shift
As the AV key is intended to select the input on your TV and most TVs use a menu to select
from a list of inputs, when the AV key is pressed in an Activity, the Menu Up, Down, Left,
Right and OK keys temporarily control the TV. If the OK key is pressed, or no key is pressed
for ten seconds, these keys will revert to controlling the relevant device for the Activity
(e.g. STB in Watch TV Mode).
Power Macro
If you hold down the Power key for 2 seconds in any Activity, the remote will send the
Power function for each device contained within that Activity. So for example, holding
Power in the default setting for Watch TV will turn both the TV and Set Top Box on or off.
LEARNING
ACTIVITIES
ACTIVITIES
2 - 5 CM
GUI DE

Produktspezifikationen

Marke: One For All
Kategorie: Fernbedienung
Modell: URC7955

Brauchst du Hilfe?

Wenn Sie Hilfe mit One For All URC7955 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Fernbedienung One For All

One For All

One For All Smart Control PS3 URC 7965 Bedienungsanleitung

19 September 2024
One For All

One For All URC 1110 Bedienungsanleitung

3 September 2024
One For All

One For All Smart Control Pro URC 7966 Bedienungsanleitung

27 August 2024
One For All

One For All Essence 8 URC 1281 Bedienungsanleitung

19 August 2024
One For All

One For All URC 7955 Smart Control 5 Bedienungsanleitung

16 August 2024
One For All

One For All URC 1914 Bedienungsanleitung

6 August 2024
One For All

One For All URC7955 Bedienungsanleitung

29 Juli 2024
One For All

One For All Contour TV URC 1210 Bedienungsanleitung

27 Juli 2024
One For All

One For All URC 6420 Simple 2 Bedienungsanleitung

27 Juli 2024
One For All

One For All URC 4811 Bedienungsanleitung

26 Juli 2024

Bedienungsanleitung Fernbedienung

Neueste Bedienungsanleitung für -Kategorien-

Neewer

Neewer RT112 Bedienungsanleitung

8 Oktober 2024
Neewer

Neewer RT113 Bedienungsanleitung

8 Oktober 2024
Logitech

Logitech Harmony 600 Bedienungsanleitung

5 Oktober 2024
Furman

Furman RS-2 Bedienungsanleitung

5 Oktober 2024
Hannspree

Hannspree YES-001016 Bedienungsanleitung

3 Oktober 2024
Canon

Canon RS-80N3 Bedienungsanleitung

3 Oktober 2024
Alpine

Alpine RUE-M300 Bedienungsanleitung

2 Oktober 2024
Meliconi

Meliconi universal 4 Bedienungsanleitung

23 September 2024
Energy Sistem

Energy Sistem 4100 Bedienungsanleitung

23 September 2024
Humax

Humax RS505 Bedienungsanleitung

23 September 2024