One For All URC 7880 Bedienungsanleitung

One For All Fernbedienung URC 7880

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für One For All URC 7880 (2 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

A  SIMPLESET

SimpleSet is a quick and easy way of setting up the remote to control the most popular

brands of each device type with only a few key presses, typically in under a minute per

device. The ﬁ rst step is to select which device you are going to set up. The following is a list

of Device Modes on the remote control, and the Device types that can be set up on that

mode:

Device Mode Type of device

TV TV, HDTV, LED, LCD, Plasma, Projector

STB Set Top Box, Satellite Receiver, Cable Converter,

Freeview, DVB-T, IPTV

BLU Blu-ray, DVD, DVD Home Cinema, VCR, Laser Disk

AUD Audio, AV Receiver, Ampliﬁ er, Tuner

DVD DVD, DVD Home Cinema, Blu-ray, VCR, Laser Disk

GAME Game Console*, Digital Media Receiver, Streamer

MEDIA Digital Media Receiver, Streamer, Game Console*

S. BAR Sound Bar, Active Speaker System

* The One For All remote can only control games consoles operated by Infra-Red, either

directly or via an adapter. Consoles that are controlled by Bluetooth only cannot be

operated.

For each Device type, there is a list of the top brands, each with a number assigned to it,

for example 5 for a Samsung TV. Locate your device and brand in the list that follows:

To set up your device

1. Turn on your device (not on standby) and point the OFA remote towards it.

2. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode key will stay lit.

3. Press the DEVICES key repeatedly until the LED for the device you

want to set up is lit.

4. Hold down the digit for your brand and device as listed above

(e.g. 5 for Samsung TV).

5. The remote will send Power every 3 seconds until your device switches oﬀ .

6. As soon as your device switches oﬀ , release the digit.

7. The LED will blink twice and go out. The remote should now operate

your device.

* If you ﬁ nd one or more keys do not work as you expect, start again at step 1 – the remote will start with the next

code in the memory.

B  SET UP BY CODE

If your brand is not listed in section A, you can set up your device by trying codes

individually. To do this:

1. Turn your device on (not on standby).

2. Locate the brand of your device in the code list (included).

Codes are listed by Device Type and Brand.

3. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode key will stay lit.

4. Press the DEVICES key repeatedly until the LED for the device you

want to set up is lit.

5. Enter the ﬁ rst 4 digit code listed for your brand (e.g. 2049 for

an Insigna TV).

6. The LED will blink twice and go out.

7. Now aim the remote towards your device and press the POWER

key.

8. If the device turns oﬀ , your remote is ready to use. If not, repeat steps 3-7

with the next code in the list.

* Some codes are quite similar. If you ﬁ nd that one or more keys do not operate as you expect, try again from step

3 with the next code in the list.

Thank you for purchasing the One For All Smart Control.

Now you can control all of your Audio/Video devices with a single remote, while enjoying

extra features such as the ability to combine devices in a single Activity Mode, sending

multiple commands on a single key press (macros) and being able to customize the

remote control to your exact requirements.

There is also a handy companion app for iPhone and Android phones which will allow

you to keep your remote up to date with the latest devices and codes. It also oﬀ ers you an

alternative way to set up your remote.

To get started with your new remote, the ﬁ rst step is to set it up to control all of your

Home Cinema devices.

A  SIMPLESET A  SIMPLESET

1 Hisense

2 LG

3 Panasonic

4 Philips, Magnavox

5 Samsung

6 Sharp

7 Sony

8 TCL, RCA

9 Toshiba

0 VIZIO

AUD – AV Receiver, Amp, Tuner

1 Bose

2 Denon

3 Harman/Kardon

4 Marantz, Philips

5 Onkyo, Integra

6 Pioneer

7 RCA

8 Samsung

9 Sony

0 Yamaha

STB – Sat, Cable, DVB-T

1 AT&T, DIRECTV, Sky Mexico

2 Bell, Bell MTS

3 Charter, Spectrum, Time Warner

Cable, Bright House Networks

4 Comcast, Xﬁ nity

5 Cox Communications

6 DISH Network, Dish Mexico

7 Optimum, Suddenlink

8 Shaw, Shaw Direct

9 TiVo

0 Verizon, Frontier

GAME, MEDIA – Games Consoles (5 & 8), Media Players

1 Apple

2 D-Link

3 Microsoft

4 Netgear

5 NVIDIA

6 Roku

7 Sling Media

8 TiVo

9 Western Digital

0 Xiaomi

BLU, DVD – Blu-ray, DVD

1 Insignia

2 LG

3 Panasonic

4 Philips, Magnavox

5 Pioneer

6 Samsung

7 Sharp

8 Sony

9 Toshiba

0 Yamaha

S. BAR – Sound Bar, Speaker Systems

1 Bose

2 JBL, ZVOX

3 LG

4 Panasonic

5 Philips, Magnavox

6 Sonos, RCA

7 Samsung

8 Sony

9 VIZIO

0 Yamaha

HOW TO SET UP YOUR REMOTE

HOW TO SET UP YOUR REMOTE HOW TO SET UP YOUR REMOTE HOW TO SET UP YOUR REMOTE

URC 7880

ENGLISH SIMPLE SET UP GUIDE

WELCOME, PREPARE YOUR

REMOTE FOR INSTALLATION

Open the battery door.

Insert 4 AAA batteries.

ENGLISH KEY TABLE

INPUT

DEVICES – Scroll through

the devices your remote

is set up to control MAGIC – Used to set up

your remote

POWER – Power on/oﬀ

DELIMITER –

Selects Sub Channels

BACK – Back one step

in the Menu of the

current device

ACTIVITY – Scrolls

through up to 5

Activity Modes –

Watch TV, Watch

Movie, Listen to

Music, Play Game and

Custom. See Activities

for details.

EXIT – Exit from the

Menu of the current

device

VOL – Volume Up, Down

and Mute

MENU – Shows the menu

of the current device

GUIDE – TV Guide, EPG

HOME –

Select the Home Menu

+/- – Channel Up and

Down

PP – Previous

Program, Last Channel

APP Shortcut Keys –

See ‘App Shortcut

Feature’

Red, Green, Yellow,

Blue – Fastext/Quick

access keys

PLAYBACK – Playback

keys for the current

device

APPS - Brings up

the Applications Menu

INPUT – Select the input

on the current device

Smart 8 CANADA VS QSG.indd 1 02-08-19 14:31

Your One For All remote control can learn any function from any other working remote

control. This can be useful if you are missing one or more functions from your original

remote control and would like to add them to the Smart Control. You can learn onto any

key except Magic, Devices or Activity.

You can also learn a complete device if you can’t ﬁ nd a code.

To learn, ﬁ rstly make sure you have all your original remote controls to hand, and that

they have working batteries in. To learn functions, the original remote should be

approximately 3cm from the OFA remote, pointing towards it as shown below:

1. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current mode key will stay lit.

2. Using the DEVICES key, make sure the LED for the device you want to

learn functions on is lit.

3. Press 975 – the LED will blink twice.

4. Press and release the key you want to learn a function onto (for example

the A key) – The Watch TV, Listen To Music and Custom LEDs will light up.

5. Press and release the key on the original remote.

6. The LED will blink twice to indicate the key has been learned correctly.

7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple

remotes, but only one function per key.

8. When you learned all the functions you require, press and hold the

MAGIC key until the LED blinks twice and turns oﬀ .

Hints

• If the LEDs shows one long blink at step 6, the function was not learned correctly, please try

again from step 4.

• If you ﬁ nd one or more keys don’t work properly after set up, you can re-enter the learning

mode at any time by repeating the procedure from step 1.

If you always use one device to control volume, for example your TV or an AV Receiver, you

can set up the Smart Control to always control that device, regardless of which device your

remote is controlling.

To do this:

1. Hold down MAGIC until the LED under the device blinks twice. The LED under the

current mode key will stay lit.

2. Press 993 – the LED will blink twice.

3. Use the DEVICES key to select the Device you want to lock the Volume to.

4. Press MAGIC once – the LED will blink twice and volume is now locked.

If there is one particular device you would like to exclude from the Volume Lock (and

control its own volume), you can do this by the following:

1. Hold down MAGIC until the LED under the device blinks twice. The LED under the

current mode key will stay lit.

2. Press 993 – the LED will blink twice.

3. Use the DEVICES key to select the Device you remove from Volume Lock.

4. Press VOLUME DOWN – the LED will blink four times and device is now removed.

To unlock the volume and set every device back to controlling its own volume, the

procedure is:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode key will stay lit.

2. Press 993 – the LED will blink twice.

3. Press VOLUME UP – the LED will blink four times and Volume is now unlocked.

Please note that Volume Lock only applies in Device Mode – Activities are unaﬀ ected.

PROGRAM A MACRO

You can program any key on your OFA remote (except MAGIC, DEVICES and the three App

Shortcut keys) to send multiple commands on a single press –a Macro. This can be useful

for controlling multiple devices to put them in a certain state – for instance you could put

your TV on HDMI 1 and press Play on the Blu-ray player to start watching a movie. A key

programmed with a Macro will send the same Macro regardless of the device mode, so it

is best to select a key you don’t use, or use one of the spare A, B or C keys.

To program a macro, the procedure is as follows:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode key will stay lit.

2. Press 995 – the LED will blink twice.

3. Next select the key you want to program the Macro on.

4. Now use the DEVICES key to select the device you want the ﬁ rst

function of the Macro to come from, for example TV.

5. Next, press the key you want to include in the Macro, for example

the INPUT key.

6. Repeat steps 4 (if necessary), and 5 to add more keys to the Macro. You can include up

to 15 key presses.

7. To store the Macro, hold down the MAGIC key until the LED blinks

twice.

* Remember to press the keys in the same order you would using your original remotes – so if you pressed AV on the TV

remote and then Play on the Blu-ray remote to watch a movie, do it in the same order on the Smart Control.

* If the LED shows a long blink when you press a key in steps 3 or 4, you have entered too many keys, please try again.

TO DELETE A MACRO

If you want to remove a macro from a key, please perform the following:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode key will stay lit.

2. Press 995 – the LED will blink twice.

3. Press the key the macro is programmed on.

4. Now hold down the MAGIC key until the LED blinks twice –

the Macro is deleted.

MACROS ON ACTIVITIES

Another handy feature of the Smart Control is to put Macros on Activities; you could for

example program the Watch TV Activity to send a Macro to turn on the TV and Set Top

Box when selected. To do this, simply use the Activity key to select the Activity in step 3 of

the procedure “Program a Macro”. Next time you use the Activity, the Macro will be sent 3

seconds after you select it using the Activity key.

If you want to delete a Macro from the Activity, select it during step 3 of “To Delete a

Macro”.

LEARNING MACROS MACROS

VOLUME LOCK

The Smart Control features 3 App Shortcut keys for viewing digital TV, streamed over the

internet. If your original remote control already had a key for this - for example many newer

TVs have a Netﬂ ix key - then this key will perform exactly the same as the key on your

original remote. However if you did not have a key like this, but still had the ability to watch

a streaming service, you can use this key as a shortcut by programming a macro on it. Most

AV devices which are connected to the internet, such as Smart TVs or streaming Set Top

Boxes have one or more applications they can run to access TV viewing via the internet.

Examples of these would be Netﬂ ix, YouTube, Amazon Prime, BBC iPlayer or similar.

To program the macro, you ﬁ rst need to know the device you use to access the service, and

then the sequence of keys you need to press to always bring up the service you prefer, For

example, some Panasonic TVs will start Netﬂ ix by pressing the Apps key, then Menu Down

Twice, and ﬁ nally the OK key. Or on an Apple TV, the sequence is Menu, Menu Down and OK.

Once you have determined the sequence for your device, follow these steps:

1. Sit in front of your device with It switched on (not on standby)

Hold down the App Shortcut key until the LED blinks twice and stays lit

3. Use the DEVICES key to select the device you want to use for the

App Shortcut

macro (e.g. TV)

4. Now perform the sequence of keys exactly as would normally.

The remote will operate your device and the macro is recorded in

real time - so if it normally takes a few seconds for your device to

react don’t worry.

5. One you have ﬁ nished the sequence - and the Streaming Service

has started on your device - hold down the

App Shortcut

key until

the LED blinks twice and goes out. The macro is now stored.

Tips

• Make sure the Smart Control Is operating the device in question before programming

• If you ﬁ nd the Macro doesn’t work as expected, you can just repeat the same sequence to

reprogram

• When programming, wait for your device to respond ﬁ rst, the remote will remember the

timing

• The

App Shortcut

macro is tied to one device, remember to make sure you are watching the

correct device.

APP SHORTCUT FEATURE

INPUT

One For All

is a registered trademark of Universal Electronics BV

Industry Canada Regulatory Information

CAN ICES-3 (B)/NMB-3 (B)

712044

RDN1020819

Customer Support:

www.oneforall-canada.ca

OFA warranty / terms & conditions:

www.oneforall-canada.ca

Imported into Canada by:

Universal Electronics BV –

Europe & International

P.O. Box 3332, 7500 DH Enschede The Netherlands

www.oneforall.com

2 - 5 CM

GU ID E

INPUT

An Activity is a grouping of two or more devices into a single mode based upon what

you’re doing while using your remote - for example TV and Set Top Box can be combined

together into a Watch TV mode. In this mode keys will control only the relevant device, so

in this example the Volume keys would control the TV, but the channel keys would control

the Set Top Box.

The OFA Smart Control features 5 Activity Modes; Watch TV, Watch Movie, Listen To Music,

Play Game and Custom. Each of these modes has a choice of devices to combine.

These are:

WATCH TV

Combination 1: TV + STB (Default)

Combination 2: TV + STB + AUD

Combination 3: TV + AUD

Combination 4: TV + S.BAR

Combination 5: TV + STB + S.BAR

WATCH MOVIE

Combination 1: TV + BLU (Default)

Combination 2: TV + BLU + AUD

Combination 3: TV + DVD

Combination 4: TV + DVD + AUD

Combination 5: TV + BLU + S.BAR

Combination 6: TV + DVD + S.BAR

LISTEN TO MUSIC

Combination 1: TV + AUD + MEDIA (Default)

Combination 2: TV + S.BAR + MEDIA

Combination 3: TV + AUD + BLU

Combination 4: AUD only

Combination 5: S.BAR only

TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode key will stay lit.

2. Using the DEVICES key, make sure the LED for the device you want

to delete functions from is lit.

3. Press 976 – the LED will blink twice.

4. Press the key to delete twice – the LED will blink twice.

Repeat the above procedure for each key you want to delete.

PLAY GAME

Combination 1: TV + GAME (Default)

Combination 2: TV + GAME + AUD

Combination 3: TV + GAME + S.BAR

CUSTOM

Combination 1: TV + MEDIA (Default)

Combination 2: TV + MEDIA + AUD

Combination 3: TV + MEDIA + S.BAR

Combination 4: TV + GAME

Combination 5: TV + GAME + AUD

Combination 6: TV + GAME + S.BAR

If you set up the default devices for any Activity on the remote (for example a TV and STB

for Watch TV) that Activity will be set up automatically on the remote. If you would like to

change to a diﬀ erent combination, the procedure is as follows:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode key will stay lit.

2. Use the ACTIVITY key to scroll through the Activities until the

one you want to set is ﬂ ashing.

3. Press the number of the combination you want to set – e.g 2

for TV + STB + AUD in Watch TV.

4. The LED will blink twice and go out.

To access the Activities, simply press the ACTIVITY key to scroll through until the desired

one is lit. You can return to controlling by device by using the DEVICES key.

INPUT Shift

As the INPUT key is intended to select the input on your TV and most TVs use a menu to

select from a list of inputs, when the INPUT key is pressed in an Activity, the Menu Up,

Down, Left, Right and OK keys temporarily control the TV. If the OK key is pressed, or no

key is pressed for ten seconds, these keys will revert to controlling the relevant device for

the Activity (e.g. STB in Watch TV Mode).

Power Macro

If you hold down the Power key for 2 seconds in any Activity, the remote will send the

Power function for each device contained within that Activity. So for example, holding

Power in the default setting for Watch TV will turn both the TV and Set Top Box on or oﬀ .

LEARNING

ACTIVITIES

Smart 8 CANADA VS QSG.indd 2 02-08-19 14:32

Produktspezifikationen

Marke:	One For All
Kategorie:	Fernbedienung
Modell:	URC 7880
Eingebaute Lautsprecher:	Nein
AC-Netzadapter:	Nein
Produktfarbe:	Schwarz
Akku-/Batterietyp:	AAA
Menge pro Packung:	1 Stück(e)
Plug & Play:	Ja
Anzahl unterstützter Akkus/Batterien:	4
Verbesserung des Videotexts:	Ja
Schnittstelle:	IR Wireless
Akkus/Batterien enthalten:	Nein
Markenkompatibilität:	Universal
Anzahl der unterstützten Geräte:	8
Beleuchtete Tasten:	Nein
Fernbedienung Nutzung:	Audio, DVD/Blu-ray, Game console, Media player, Soundbar speaker, TV
Eingangssignal:	Drucktasten
Mobile App-Unterstützung:	Ja