One For All Evolve 2 Bedienungsanleitung

One For All Fernbedienung Evolve 2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für One For All Evolve 2 (2 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

B  SET UP BY CODE

HOW TO SET UP YOUR REMOTE

If your brand is not listed in section A, you can set up your device by trying codes individually.

To do this:

1. Turn your device on (not on standby).

2. Locate the brand of your device in the code list (pages 126-137). Codes

are listed by Device Type and Brand.

3. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

4. Press the MODE key repeatedly until the LED for the device you want to

set up is lit.

5. Enter the rst 4 digit code listed for your brand (e.g. 4542 for a Aiwa TV).

6. The LED will blink twice and go out.

7. Now aim the remote towards your device and press the POWER key.

8. If the device turns o, your remote is ready to use. If not, repeat steps 3-7 with the next code

in the list.

• Some codes are quite similar. If you nd that one or more keys do not operate as you expect,

try again from step 3 with the next code in the list.

ESPAÑOL

URC7125

SIMPLE SET UP GUIDE

ENGLISH

Open the battery door.

Insert 2 AAA batteries.

ENGLISH

KEY TABLE

HOW TO SET UP YOUR REMOTE

A – SIMPLESET

SimpleSet is a quick and easy way of setting up the remote to control the most popular brands of

each device type with only a few key presses, typically in under a minute per device. The rst step

is to select which device you are going to set up. The following is a list of Device Modes on the

remote control, and the Device types that can be set up on that mode:

Device Mode Type of device

TV TV, HDTV, LED, LCD, Plasma, Projector

STB Set Top Box, Satellite Receiver, Cable Converter,

Freeview, DVB-T, IPTV, Media, Streamer

For each Device type, there is a list of the top brands, each with a number assigned to it,

for example 6 for a Samsung TV. Locate your device and brand in the list that follows:

1Bush

2Grundig

3LG

4Panasonic

5Philips

6Samsung

7Sharp

8Sony

9TCL / Thomson

0Toshiba

STB: Sat, Cable, DVB-T

1BSkyB / Sky Ireland / Orange

2Canal+ / CanalSat / Telefonica /

Movistar / KPN

3TechniSat

4DStv / Multichoice / Foxtel / Sky New

Zealand

5freebox / Vu+ / Deutsche Telekom /

T-Home

6Humax / Tricolor TV

7Vodafone / Kabel Deutschland

8Sky Italia / SFR / Neuf TV

9Sky Deutschland / Österreich

0UPC / Cablecom / Ziggo / Virgin Media /

Telenet

MAGIC: Used to set up

your remote

+/-: Channel Up and Down

MENU: Show the menu of

the current device

EXIT: Exit from the Menu of

the current device

AV: Select the input on

the current device

INFO: Displays info of

current playback

POWER:

Power on/o

PP: Previous Program, Last

Channel

NETTV: NETTV, Netix

Red, Green, Yellow, Blue –

Fastext/Quick access keys

PLAYBACK: Playback keys

for the current device

MODE: Scroll through

the devices your remote is

set up to control

WATCH TV: Combines TV and

STB into one mode

for TV viewing

FAV: Favourite Channels

GUIDE: TV Guide, EPG

SMART: Access internet

and Smart features

of your TV or internet-

connected device

BACK: Back one step in

the Menu of the current device

VOL: Volume Up, Down and

Mute

HOME: Displays the Home

LIST: Displays a list of

recorded programmes

A – SIMPLESET

HOW TO SET UP YOUR REMOTE

To set up your device

1. Turn on your device (not on standby) and point the OFA remote towards it.

2. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

3. Press the MODE key repeatedly until the LED for the device you want to

set up is lit.

4. Hold down the digit for your brand and device as listed above (e.g. 6 for

Samsung TV).

5. The remote will send Power every 3 seconds until your device switches o.

6. As soon as your device switches o, release the digit.

7. The LED will blink twice and go out. The remote should now operate your device.

• If you nd one or more keys do not work as you expect, start again at step 1 – the remote will

start with the next code in the memory.

Evolve_2_QSG_UK_URC7125_711733_RDN1010519.qxp_Opmaak 1 01-05-19 17:11 Pagina 1

LEARNING

Your One For All remote control can learn any function from any other working remote control.

This can be useful if you are missing one or more functions from your original remote control and

would like to add them to the ONE FOR ALL. You can learn onto any key except MAGIC or MODE.

You can also learn a complete device if you can’t nd a code.

To learn, rstly make sure you have all your original remote controls to hand, and that they have

working batteries in. To learn functions, the original remote should be approximately 3cm from

the OFA remote, pointing towards it as shown below:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current device will stay lit.

2. Press the MODE key repeatedly until the LED for the device you want to

learn functions on is lit.

3. Press 975 – the LED will blink twice.

4. Press and release the key you want to learn a function onto (for example

the HOME key) – The red LED will blink continuously.

5. Press and release the key on the original remote.

6. The LED will blink twice to indicate the key has been learned correctly.

7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple

remotes, but only one function per key.

8. When you learned all the functions you require, press and hold the

MAGIC key until the LED blinks twice and turns o.

HINTS

• If the LEDs shows one long blink at step 6, the function was not learned correctly, please try

again from step 4.

• If you nd one or more keys don’t work properly after set up, you can re-enter the learning

mode at any time by repeating the procedure from step 1.

TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current device will stay lit.

2. Using the MODE key, make sure the LED for the device you want to delete functions

from is lit.

3. Press 976 – the LED will blink twice

4. Press the key to delete twice – the LED will blink twice.

Repeat the above procedure for each key you want to delete.

ACTIVITIES

The Watch TV feature combines TV and STB into a single mode. In this mode the Volume and AV

keys will control the TV, and the rest of the keys will control the STB.

As the AV key is intended to select the input on your TV and most TVs use a menu to select from a

list of inputs, when the AV key is pressed in Watch TV Mode, the Menu Up, Down, Left, Right and

OK keys temporarily control the TV. If the OK key is pressed, or no key is pressed for ten seconds,

these keys will revert to controlling the STB.

If you hold down the Power key for 2 seconds in Watch TV Mode, the remote will send the Power

function for TV and STB.

MACROS

PROGRAM A MACRO

You can program any key on your OFA remote (except MAGIC or MODE) to send multiple

commands on a single press –a Macro. This can be useful for controlling multiple devices to put

them in a certain state – for instance you could put your TV on HDMI 1 and press Power on the

Set Top Box to start watching TV.

To program a macro, the procedure is as follows:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current device will stay lit.

2. Press 995 – the LED will blink twice.

3. Next select the key you want to program the Macro on.

4. Now use the MODE key to select the device you want the rst function

of the Macro to come from, for example TV.

5. Next, press the key you want to include in the Macro, for example the

AV key.

6. Repeat steps 4 (if necessary) and 5 to add more keys to the Macro. You can include up to 15

key presses .

7. To store the Macro, hold down the MAGIC key until the LED blinks twice.

• If the LED shows a long blink when you press a key in steps 4 or 5, you have entered too

many keys, please try again.

DELETING A MACRO

If you want to remove a macro from a key, please perform the following:

1. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

2. Press 995 – the LED will blink twice.

3. Press the key the macro is programmed on.

4. Now hold down the MAGIC key until the LED blinks twice – the Macro is

deleted.

VOLUME LOCK

If you always use one device to control volume, for example your TV, you can set up the One For

All to always control that device, regardless of which device your remote is controlling. To do this:

1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current

device will stay lit.

2. Press 993 – the LED will blink twice.

3. Use the MODE key to select the Device you want to lock the Volume to.

4. Press MAGIC once – the LED will blink twice and volume is now locked.

To unlock the volume and set every device back to controlling its own volume, the procedure is:

1. Hold down MAGIC until the LED under the TV key blinks twice. The LED under the current

mode key will stay lit.

2. Press 993 – the LED will blink twice.

3. Press VOLUME UP – the LED will blink twice and Volume is now unlocked.

Universal Electronics BV

Europe & International

Colosseum 2, 7521 PT Enschede

The Netherlands

URC7125

711733

RDN-1010519

2 - 5 CM

THE NETTV FEATURE

The Evolve features a “NETTV” key for viewing digital TV,

streamed over the internet. If your original remote control

already had a key for this - for example many newer TVs have

a Netix key - then this key will perform exactly the same as

the key on your original remote. However if you did not have

a key like this, but still had the ability to watch a streaming

service, you can use this key as a shortcut by programming a

macro on it. Most AV devices which are connected to the internet, such as Smart TVs or streaming

Set Top Boxes have one or more applications they can run to access TV viewing via the internet.

Examples of these would be Netix, YouTube, Amazon Prime, BBC iPlayer or similar.

To program the macro, you rst need to know the device you use to access the service, and then

the sequence of keys you need to press to always bring up the service you prefer, For example,

some Panasonic TVs will start Netix by pressing the Apps key, then Menu Down Twice, and

nally the OK key. Or on an Apple TV, the sequence is Menu, Menu Down and OK.

Once you have determined the sequence for your device, follow these steps:

1. Sit in front of your device with It switched on (not on standby)

2. Hold down the NETTV key until the LED blinks twice and stays lit

3. Use the MODE key to select the device you want to use for the NETTV macro (e.g. TV)

4. Now perform the sequence of keys exactly as would normally. The remote will operate your

device and the macro is recorded in real time - so if it normally takes a few seconds for your

device to react don’t worry.

5. One you have nished the sequence - and the Streaming Service has started on your device -

hold down the NETTV key until the LED blinks twice and goes out. The macro is now stored.

Tips

• Make sure the Evolve Is operating the device in question before programming

If you nd the Macro doesn’t work as expected, you can just repeat the same sequence

to reprogram

• When programming, wait for your device to respond rst, the remote will remember

the timing

• The NETTV macro is tied to one device, remember to make sure you are watching

the correct device.

English - PRODUCT DISPOSAL

This product bears the selective sorting symbol for waste electrical and electronic equipment

(WEEE). This means that this product must be handled pursuant to European directive

2012/19 / EU in order to be recycled or dismantled to minimize its impact on the

environment.

User has the choice to give this product to a competent recycling organization or to the retailer

when user buys a new electrical or electronic equipment.

BATTERY DISPOSAL

(EUROPEAN DIRECTIVE 2006/66/EC)

Please do not dispose your batteries with your normal household waste but inform yourself about

the local separate collection for empty batteries to dispose them correctly. This will help preventing

potential negative eects on the environment and/or human health.

UNIVERSAL ELECTRONICS INC/ONE FOR ALL warrants to the original purchaser that this product

will be free from defects in materials and workmanship under normal and correct use for a period

of one (1) year from the date of original purchase. This product will be replaced free of charge if it

has been proven to be defective within the one (1) year warranty period. This warranty does not

cover cartons, carrying cases, batteries, broken or marred cabinets or any other item used in con-

nection with the product. Any further obligation than listed above is excluded. Please notice that

we need your purchase receipt so that we may establish your eligibility for service. If you have

bought this product for purposes which are not related to your trade, business or profession, please

remember that you may have legal rights under your national legislation governing the sale of con-

sumer goods. This guarantee does not aect those rights.

www.oneforall.com

Evolve_2_QSG_UK_URC7125_711733_RDN1010519.qxp_Opmaak 1 01-05-19 17:11 Pagina 5

Produktspezifikationen

Marke:	One For All
Kategorie:	Fernbedienung
Modell:	Evolve 2
Gewicht:	94 g
Produktfarbe:	Schwarz
Akku-/Batterietyp:	AAA
Eingebautes Display:	Nein
Paketgewicht:	334 g
Anzahl unterstützter Akkus/Batterien:	2
Verpackungsabmessungen (BxTxH):	45.4 x 232 x 21 mm
Markenkompatibilität:	Jede Marke
Maximale Reichweite:	- m
Wiederaufladbar:	Nein
Anzahl der unterstützten Geräte:	2
Beleuchtete Tasten:	Nein
Fernbedienung Nutzung:	CABLE, DTT, IPTV, SAT, TNT, TV
Eingangssignal:	Drucktasten