OLLO TT-03 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr OLLO TT-03 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
P5
H1
I
A1
E1
P7
TOP
T1
CAUTION:This stand is intended for use only with the maximum
weight indicated .Use of this product with flat screen televisions exceeding
the maximum weight capacity may cause instability resulting in property
damage and / or bodily harm.
Do not attempt to assemble this product until all instructions and warnings
have been read and properly understood .Please keep these instructions for
future reference .
M6X25M6X12 M8X18 M5X25 M8X30
M8
M5X12
1x
4x 4x4x 4x4x 4x 4x4x
1x 1x 2x 1x
P1 P2 P3 P4 P5
2
1
1x 2x 1x 2x
P6 P7 P10 P11
1x
P9
M6 M6X16M8 M8X35
3x 4x 12x 2x8x 2x 1x 4x2x1x
++
1x 1x 1x 4x
T1 T2 T3 T4
5.0 4.0
NOTE: Tighten the threaded rod connector (G1) ,to the base plate and then firmly
tighten the threaded rod (P9) to the connector.
P9
G1
Install threaded connector and threaded rod
1 1 1 1 1 1 1 1
16X 6.6X1.6
24X 9X2
22X 8X2
1x
P8
FRONT VIEW
REAR VIEW
Attach rubber feet to underside of glass base the rubber feet
"J" come in a strip of 4,it is printed with 3M logo on the
underside.
J X4
OK
TOP
This side up !
BACK
BOTTOM
This side against glass !
Explanation of part P7
The bolt ” I” passes through this hole.
No bolt inserted.
No bolt inserted.
This part is aligned with the front hole in
glass to ensure correct positioning.
3M LOGO
FRONT
P3
T2
B1X4
D1X4
D1X4
C1X4
5-1
5-2
6
Attach The Mount Arms To
The Back Of The TV And
Secure TV To The Mount
You will hear a”click” when
locked. Test by hand to m
sure the mount arm is loc
before leaving TV unattend
We have included sev
different types of screws for
purpose, they are marked A
and you will need only one
these sets so you will have e
unused pieces when y
installation is finished, This
normal. If the correct screw is
included we suggest you con
your local hardware store.
7
Secure top plate Match grooves to rectangular fins.Please note the .
position of the three holes on P2, the three holes are offset and they
should be positioned closest to the front with a larger gap at the bottom.
Attach fins There are two height adjustment.
After Mounting The TV , Adjust The Tilt To Desired Angle
P4 P4
A B CD E F
GG
H
Place rectangular column(P1) over threaded rod,seating the
column perimeter over the corresponding grooves on the
base isolation pad.
NOTE: The cable management holes must face the rear.
P1
T2
TOP
BOTTOM
P11
D1X4 C1X4
Loosen these screws on
each side to adjust the
tilt angle.
Tighten screws to lock
in tilt angle.
3
PULL PULL
T2
4Assemble the friction plates
G1
P10
E1
A1
T3
H1
A1
F1
P8
P2
TOP
BOTTOM
SMALLER GAP
LARGER GAP
T3
P7
P6


Produktspezifikationen

Marke: OLLO
Kategorie: Nicht kategorisiert
Modell: TT-03

Brauchst du Hilfe?

Wenn Sie Hilfe mit OLLO TT-03 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert OLLO

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-