Nxg NX-W6.2-P Bedienungsanleitung

Nxg Lautsprecher NX-W6.2-P

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Nxg NX-W6.2-P (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
(Continued on reverse)
Where To Place Your In-Wall Speakers
Placement can make all the difference in how your speakers sound, and how easy they will be to
install. Carefully consider where your speakers should be positioned. For optimum performance,
speakers should be mounted to the left and right of the main listening position and a minimum of 8
to 10 feet apart (See Fig. 2). Avoid mounting speakers in stud cavities containing electrical wiring,
heating ducts, water pipes, etc. Make sure the wall or ceiling materials are sturdy enough to sup-
port the weight of the speakers.
In-Wall Placement: Optimum performance will be achieved when your speakers are mounted at
ear level or slightly higher. If you desire to mount them higher in the wall, turn the speaker over so
the tweeter is closer to the listening area.
In-Ceiling Placement: Optimum performance will be achieved when your speakers are mounted
to the left and right of the main listing area.
Pivoting Tweeters (Fig. 3)
The tweeters in all NXG Pro Series speakers may be adjusted, allowing you to tailor the speaker to
better fit the listening area. The overall smoothest response is achieved with the tweeter facing
straight out: however, you may find the sound more pleasing by aiming tweeters toward a particular
listening area. To adjust the tweeter, apply pressure on the ring surrounding the tweeter with your
thumb or finger.
Tweeter Level Adjustment (Fig. 3)
The level switch allows you to tailor the speakers’ frequency response to better match the room’s
acoustics. As an example, if a room has a hardwood floor, which makes it acoustically brighter
sounding, you may want to turn the tweeter level down. You can experiment with the levels to find
the sound that’s most pleasing to you in your particular listening environment.
Speaker Installation In Existing Construction (See Fig. 4 on reverse)
Once you have selected the location for your speakers, you are ready to install them.
You will need the following:
• Stud Finder • Drill & Drill Bits • Wire Cutter/Strippers
• Pencil • Utility Knife or Drywall Saw • Small Level
• Masking Tape • Phillips Screwdriver • Speaker Wire
NXG recommends the use of 16-gauge wire minimum. For wire options consult your retailer or
custom audio contractor.
1. NXG Architectural Speakers are designed to be installed in the wall area between studs. Using a
stud finder, make sure you are between two studs. Using the supplied template and a level to
ensure your template is straight, trace around the outside with a pencil.
2. Cut the hole using your drywall saw. You may want to start with a small hole in the center of the
outline. This will allow you to check for any obstructions that may exist behind the desired location.
CAUTION: Be certain electrical wiring, water pipes or heating ducts do not interfere in the planned
installation areas prior to drilling or cutting the wall.
3. Run speaker wire from your amplifier or speaker switching device to the speaker location.
4. Carefully remove the grille and inner grille backing. (Note: The open cell foam inner grille backing
is designed to hide speaker components from view and may be removed if desired.) If you like the
standard white finish of your NXG speakers, skip to step 5, but if if you want your speakers to blend
in with a colored wall or ceiling, now is the time to paint your speaker’s outer frame and perforated
grille. (Remove the foam inner grille backing and put it aside in a clean and dust free area for later
Congratulations on choosing NXG
In-Wall Loudspeakers. Like all NXG
products, great care has been taken
in their design. Their combination of
advanced engineering and state-of-
the-art materials will provide you with
years of listening pleasure, while
blending smoothly into your home’s
decor. Before you get started, it is a
good idea to identify all the parts and
hardware (See Fig. 1).
FIG. 3
Press on the edge of
the tweeter to rotate
FIG. 2
4
4
2
2
3
3
1
1
Adjust tweeter level
by setting switch
IR sensor knockout
Speaker with self-contained
mounting clamps
Aluminum grille with
foam inner backing
NX-W6.2-P 61/2˝ Two-Way In-Wall Speaker System
FIG. 1
Grille
removal
tool
Black
grille
adhesive
Tweeter Level Switch
Painting masks
Cutout templates
NXG Pro Series In-Wall Speakers can be used as
rear surround sound channels by placing
them (1) behind, (2) on each side of viewer,
or (3) in the ceiling just behind viewing
position. They also make excellent front
channel home theater speakers (4).
FIG. 4
(Continued from front)
NXG Speakers Three-Year Limited Warranty
If the NXG speaker system proves to be defective in workmanship or materials
within three years from the date of the original customer’s purchase, we will, at our
option, repair or replace the defective product.
Limitation of Implied Warranties
Any implied warranties, including warranties of merchantability and fitness for a
particular purpose, are limited in duration to the length of this warranty.
Exclusion of Certain Damages
NXG’s liability for any defective product is limited to repair or replacement of the
product at our option. NXG shall not be liable for incidental or consequential
damages of any kind or character because of product defects. Some states do
not allow limitations on how long an implied warranty lasts and/or do not allow the
exclusion or limitation of incidental or consequential damages, so the above limita-
tions and exclusions may not apply.
This Warranty Does Not Cover:
• Damage caused by abuse, accident, misuse, negligence, or improper operation.
• Any product whose serial number has been altered, defaced, or removed.
• Products that have been altered or modified.
• Normal wear and maintenance.
• Damages caused by shipping. (All claims for shipping damage must be made
with the carrier.)
reinstallation if desired.) The speaker’s outer surface will
accept ordinary latex wall paint or aerosol spray paint. Because
the speaker baffle surface behind the grille should remain
unpainted, you will need to cover this area with the supplied
cardboard paint mask. Cover the speaker’s interior black sur-
face, woofer and tweeter. Paint the outer speaker frame and
grille separately. (Grille painting hint: Use a paint roller that is
nearly out of paint to first paint the inside of the grille, then the
outside. This will avoid paint filling the grille perforations.)
5. Attach the wire to the input terminals on the rear of the
speaker. Remember to maintain proper polarity with the ampli-
fier by attaching the positive (+) lead to the red terminal and the
negative (-) lead to the black terminal.
6. See Fig. 5. With the speaker wire attached to the speaker,
slide the speaker up inside the cut-out hole. Center the speak-
er in the cut-out hole and turn the six locking screws clockwise
until the speaker is drawn up snugly to the wall board from
behind, clamping the speaker in place. Try to tighten each
screw equally. Replace the speaker grill by gently pressing it
into place.
New Construction
1. Determine speaker locations and mark them on your plans
for future reference.
2. If possible, run speaker wires after HVAC and electrical wiring
is in place.
3. Secure speaker wires in place along the run with insulated
staples only and be careful not to pierce the wire’s insulation.
Allow a bit of slack for expansion of building materials.
4. Needless to say, the actual speakers should not be installed
until the wall board is in place. In the meantime, leave several
feet of wire coiled up and secured at the back side of the
mounting hole.
5. To complete the installation follow steps 2 through 5 above.
Operational Check
After making all connections it’s a good idea to make sure
everything is working properly. Turn on your surround or stereo
system making sure the volume control is turned down and that
the balance control is in the center position. Activate a musical or
movie source such as FM, a CD or DVD player. Gently turn up
the volume, you should hear sound coming from your new NXG
speakers. If no sound is heard from any or all speakers, switch
off the system immediately and check for open or loose connec-
tions, wrong polarity or shorts, or proper source selection.
FIG. 5
NX-W6.2-P Specifications
Power Handling: 5 - 120 watts
Efficiency: 90dB @ 1 watt/1 meter
Frequency Response: 40 Hz - 22,000 Hz
Driver Complement: 61
/2˝ (165 mm) metallic anodized graphite-filled
injection-molded RCT cone woofer w/rubber surround
1˝ (25 mm) minimum diffraction, pivoting,
fluid-cooled, high tenacity teteron dome tweeter
Impedance: 8 ohms nominal, 6 ohms minimum
Grille: Corrosion-resistant powder coated aluminum
Overall Dimensions (H x W x D): 12 1/2˝ x 9˝ x 3 1
/2˝
(318 mm x 229 mm x 89 mm)
Required Wall Cut-out (H x W): 10 7
/8˝ x 73/8˝ (276 mm x 187 mm)
Warranty Service
Warranty service must be performed by an authorized service center, usually an NXG
speaker systems dealer or its authorized agent. You may obtain a list of authorized
service centers by contacting NXG. All warranty
repairs must be accompanied by the original bill of
sales. No other document is acceptable or is
required. This warranty gives you specific legal
rights, and you may also have other rights which
vary from state to state.
NXG reserves the right to revise speaker system
specifications without notice.
16648 North 94th Street
Scottsdale, AZ 85260
1-800-733-0008

Produktspezifikationen

Marke: Nxg
Kategorie: Lautsprecher
Modell: NX-W6.2-P

Brauchst du Hilfe?

Wenn Sie Hilfe mit Nxg NX-W6.2-P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Nxg

Nxg

Nxg NX-W5.2-LCR-P Bedienungsanleitung

21 August 2024
Nxg

Nxg NX-W6.2-P Bedienungsanleitung

21 August 2024
Nxg

Nxg NX-C6.2-P Bedienungsanleitung

20 August 2024
Nxg

Nxg NX-C8.3-P Bedienungsanleitung

19 August 2024
Nxg

Nxg NX-C8.2-P Bedienungsanleitung

18 August 2024
Nxg

Nxg NX-AW5 Bedienungsanleitung

10 Juli 2024
Nxg

Nxg Onyx NX-C8.2-ENC-X Bedienungsanleitung

15 November 2023

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024