Numark tt 1650 Bedienungsanleitung

Numark Plattenspieler tt 1650

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Numark tt 1650 (16 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
TT-1650
Operating Instructions
(1) TT-1650 Turntable (1) Aluminum Platter
(1) IEC Power Cable
(1) RCA Cord w/
Ground Wire
(1) Slipmat
INSIDE THE BOX:
(1) Headshell w/
Cartrdige
(1) Counter Weight
PAGE 1 SAFETY PRECAUTIONS
Thank you for buying this Numark product.
Please read these operating instructions so you will know how to operate this equipment properly.
After you have finished reading these instructions, keep them for future reference.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use
shielded cables and connectors for connections.
IMPORTANT NOTICE:
RECORD THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT BELOW.
MODEL NO:
SERIAL NO:
SAFETY PRECAUTIONS
READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is
operated.
RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future
reference.
HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
CLEANING
Unplug this product from the wall outlet before cleaning. The product should
be cleaned only with a polishing cloth or a soft dry cloth. Never clean with
furniture wax, benzene, insecticides or other volatile liquids since they may
corrode the cabinet.
ATTACHMENTS
Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
WATER AND MOISTURE
Do not use this product near water - for example, near a bathtub, washbowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool;
and the like.
ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury to a child or adult and
serious damage to the product. Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer, or sold with the product. Any
mounting of the product should follow the manufacturer's instructions, and
should use a mounting accessory recommended by the manufacturer.
CART
A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company.
LOCATION
The appliance should be installed in a stable location.
NONUSE PERIODS
The power cord of the appliance should be unplugged from the outlet when
left unused for a long period.
GROUNDING OR POLARIZATION
If this product is equipped with a polarized alternating current line plug (a
plug having one blade wider than the other), it will fit into the outlet only
one way. This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug. If this product is equipped with a three-
wire grounding type plug, a plug having a third (grounding) pin, it will only
fit into a grounding type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the grounding type
plug.
POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where
they exit from the product.
OUTDOORS ANTENNA GROUNDING
If an outside antenna or cable system is connected to the product, be sure
the antenna or cable system is grounded to provide some protection against
voltage surges and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
LIGHTNING
For added protection for this product during a lightning storm, or when it is
left unattended and unused for long periods, unplug it from the wall outlet
and disconnect the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.
POWER LINES
An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
OVERLOADING
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY - Never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
SERVICING
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
If the product has been dropped or damaged in any way.
When the product exhibits a distinct change in performance - this indicates a
need for service.
REPLACEMENT PARTS
When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in
proper operating condition.
HEAT
The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce
heat.
PAGE 2TABLE OF CONTENTS
IMPORTANT
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
NOTICE
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
NOTICE
The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION!
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
TABLE OF CONTENTS
Controls 3-4
Setup & Installation 5
Platter Setup 6
Cartridge Setup 7
Tone Arm Setup 8
Cable Connections 9
Operation 10
Warranty Information 11
Return Information 12
Specifications 13
Troubleshooting 14

Produktspezifikationen

Marke: Numark
Kategorie: Plattenspieler
Modell: tt 1650

Brauchst du Hilfe?

Wenn Sie Hilfe mit Numark tt 1650 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Plattenspieler Numark

Numark

Numark TTUSB Bedienungsanleitung

4 Oktober 2024
Numark

Numark NTX1000 Bedienungsanleitung

5 August 2024
Numark

Numark PT-01 Bedienungsanleitung

26 Juli 2024
Numark

Numark TT250USB Bedienungsanleitung

13 Juli 2024
Numark

Numark NXT1000 Bedienungsanleitung

7 Juli 2024
Numark

Numark tt 1650 Bedienungsanleitung

15 Mai 2023

Bedienungsanleitung Plattenspieler

Neueste Bedienungsanleitung für -Kategorien-

ION

ION PROFILE PRO Bedienungsanleitung

16 Oktober 2024
Bauhn

Bauhn ARTTS-0824 Bedienungsanleitung

15 Oktober 2024
TEAC

TEAC LP-R500 Bedienungsanleitung

14 Oktober 2024
Pro-Ject

Pro-Ject RPM 9.2 Evolution Bedienungsanleitung

10 Oktober 2024
Audio-Technica

Audio-Technica AT-LP60XBT Bedienungsanleitung

10 Oktober 2024
Lenco

Lenco LS-500 Bedienungsanleitung

9 Oktober 2024
Audio-Technica

Audio-Technica VM610MONO Bedienungsanleitung

8 Oktober 2024
Ricatech

Ricatech RTT95 Bedienungsanleitung

5 Oktober 2024
NAD

NAD C555i Bedienungsanleitung

5 Oktober 2024
Pro-Ject

Pro-Ject 2Xperience SB Sgt. Pepper Limited Edition Bedienungsanleitung

4 Oktober 2024