Novation nio 2|4 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Novation nio 2|4 (30 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/30
FA0163-01
INTRO
Welcome to the nio User Guide. This document should provide all the information you need to learn how to operate the
stylish USB interface. After detailing all of the controls and connections one by one, there are sections describing how
to record various sources, as well as defining output streams a and b and how to create monitor mixes. If you haven’t
already, you may want to also check out the printed Getting Started Guide in the box and the nio Tutorial movies on the
Novation website.
If you are having difficulty operating nio and cannot find the solution in this guide, go to the online answerbase at
www.novationmusic.com and type any relevant keywords into the search box.
WHAT’S IN THE BOX?
In the box with nio, you’ll find:
• Printed Getting Started Guide – to help you with the install process, plugging in and learning about basic operation
• Resources disc – contains the installer and full User Guide pdf
• USB cable – use this to connect to the computer after installation is complete
• Free software disc (e.g. Xcite+ pack) – contains any accompanying software and samples
GETTING STARTED
As outlined in the printed Getting Started Guide, the first stage of setting up nio is to run the installer. Separate PC
and Mac installers for nio can be found on the nio resources disc. Running the installer carries out the following actions:
• Installs the Audio driver
• Installs the MIDI driver
• Installs the FX Rack software
PC SETUP
1. Close all running programs
2. With nio disconnected from your computer, locate the nio PC installer on the resources disc and double-click to run it
3. You may be asked to restart your computer to complete installation
4. Once the installer has finished, or once your computer has restarted, connect nio to your computer. A balloon will appear
whilst Windows installs the device:
XP Vista
5. Wait for the balloon to tell you ‘Device driver software successfully installed’ (Win Vista) or ‘Your new device is installed
and ready to use’ (Win XP)
2
MAC SETUP
1. Close all running applications
2. With nio disconnected from your computer, locate the nio Mac installer on the resources disc and double-click to run it
3. You may be asked to restart your computer to complete installation
4. Once the installer has finished, or once your computer has restarted, connect nio to your computer
Nio can now be used as an Audio and MIDI device with your computer. To apply the nio FX to the audio inputs, launch the
nio FX Rack software from the Start menu (Windows) or your Applications folder (Mac).
FRONT PANEL CONTROLS
1. Sets the level of Headphones 1
2. Chooses the signal sent to Outputs 1 and 2. This can be ‘a’
(nio outputs 1/2 from the sequencer) or ‘mon’ (the monitor mix
created in the ‘monitor’ section below - 12 16and )
3. Sets the level of Outputs 1 and 2 on the rear panel
4. Shows the level of Input 1 or Output 1 (dependent on the position
of the ‘meters’ switch below - 14)
5. Sets the gain (level) of Input 1
6. Sets the gain (level) of Input 2
7. Shows the level of Input 2 or Output 2 (dependent on the position
of the ‘meters’ switch below - 14)
8. Sets the level of Outputs 3 and 4 on the rear panel
9. Chooses the signal sent to Outputs 3 and 4. This can be ‘a’ (nio
outputs 1/2 from the sequencer), ‘b’ (nio outputs 3/4 from the
sequencer) or ‘mon’ (the monitor mix created in the ‘monitor’
section below - 12 and 16)
10. Sets the level of Headphones 2
11. Indicates when nio’s Direct FX software is in use
12. Creates the blend of inputs and ‘playback’ (recorded) tracks for the monitor mix. In the extreme clockwise position,
only inputs are heard, whilst in the fully anticlockwise position, only the mix created by the a-b mix dial to the left is heard
13. Pans the inputs left and right respectively (stereo) or both centrally (mono) in the monitoring section (“mon” mix)
14. Selects the source shown by the LED meters above. Choices are Inputs 1/2 in the left position and Outputs 1/2 in
the right position
15. Selects the signal sent to the 2 pairs of headphones. Choices are ‘a’ (nio outputs 1/2 from the sequencer), ‘b’
(nio outputs 3/4 from the sequencer) or ‘mon’ (the monitor mix created in the ‘monitor’ section above - 12 and 16)
16. Creates a blend between ‘a’ (nio outputs 1/2 from the sequencer) and ‘b’ (nio outputs 3/4 from the sequencer).
This becomes the a-b ‘mix’ of playback tracks that can be blended with the inputs using the dial to the right to create
the monitor mix
3


Produktspezifikationen

Marke: Novation
Kategorie: Nicht kategorisiert
Modell: nio 2|4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Novation nio 2|4 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Novation

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-