Novation Launchpad Pro Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Novation Launchpad Pro (28 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
Programmer’s Reference Guide
Document number: FFFA001331-02
Version 1.01
Written by John Wilson and Lottie Thomas
Edited by Alex Godfrey & Ed Fry
© Focusrite Audio Engineering LTD
© Focusrite Audio Engineering LTD
2
Table of Contents
About this Guide 3
Number Systems and MIDI conventions 3
Bootloader 3
Basic Features 4
Basic Layouts 4
Basic 4Communication
Set- 5up Screen
Colours 6
Note Layout 6
Drum Layout 8
Fader Layout 9
Programmer Layout 16
Device Inquiry 18
Advanced Features 20
Lighting LEDs Using SysEx Messages 20
Flashing 21
Pulsing 21
RGB Mode 22
MIDI Clock 23
Text scrolling 23
System Exclusive Messages 25
Other SysEx Messages 28
© Focusrite Audio Engineering LTD
3
About this Guide
Launchpad Pro communicates using MIDI over USB and MIDI jack, operating in both directions. This manual,
describing the MIDI communication format, is all the information you need to be able to write software that
is customised for Launchpad Pro.
This is not an exhaustive document. Certain extra System Exclusive messages are used for authentication,
and for remote firmware upgrade. These are beyond the scope of this document, however, it is worth
knowing that they exist in case you encounter them while you are playing with Launchpad Pro.
Number Systems and MIDI conventions
There are three ways of expressing MIDI data in this manual. The first, where appropriate, is a plain English
description of the message. When we describe a musical note, middle C is deemed to be ‘C3’ or note 60.
MIDI channel 1 is considered to be the lowest- - . numbered MIDI channel and channels range from 1 16
MIDI messages are also expressed in plain data, with decimal and hexadecimal equivalents. The hexadecimal
number will always be followed by an ‘h’ and the decimal equivalent given in brackets. For example a Note
O h n message on channel 1 is signified by the status byte 90 (144).
Bootloader
Launchpad Pro has a bootloader mode that allows the user to configure and save certain settings. The
bootloader is accessed by holding the button device n. Setup whilst switching the o
The top two rows of square buttons he device The device ID can be used to set t USB ID of Launchpad Pro.
ranges from 1 – 16 and the selected ID is represented by an orange button This also sets the USB . identity,
which h h.ranges from 51 to 60 The default ID from the factory is 1. If more than one Launchpad Pro is to be
used on USB, then each device must have a different USB ID selected.
Figure 1: Bootloader display

Produktspezifikationen

Marke: Novation
Kategorie: niet gecategoriseerd
Modell: Launchpad Pro

Brauchst du Hilfe?

Wenn Sie Hilfe mit Novation Launchpad Pro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd Novation

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-