Nitecore TM26GT Bedienungsanleitung

Nitecore Taschenlampe TM26GT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Nitecore TM26GT (2 Seiten) in der Kategorie Taschenlampe. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

User Manual

Features

·Small and lightweight 3500-lumen LED Flashlight

·Utilizes 4 x CREE XP-L HI V3 LEDs

·Integrated multi-function OLED display

·Incorporates Precision Digital Optics Technology (PDOT)

Maximum intensity of 124,000cd

Beam distance up to 704 meters

·Thermal protection circuit prevents overheating

·Compatible with both 18650 Li-ion and CR123 batteries

·Intelligent charging circuit with voltage detection for safe and fast charging

·Exceptionally long runtime using 4 × 18650 Li-ion or 8 × CR123 batteries

·Capable of running on 1 × 18650 or 2 x CR123 batteries in emergency

situations

·Eight rapidly switchable brightness levels and modes to select from

·Innovative single button two-stage switch provides a user-friendly interface

(Chinese Patent: Z L201120062948.1)

·Toughened ultra-clear mineral glass with anti-reflective coating

·A power indicator built into the on/off switch indicates remaining battery power

(Chinese Patent: ZL201220057767.4)

·Stainless steel bezel ring protects core components from damage

·Constructed from aerospace-grade aluminum alloy

·HAIII military grade hard-anodized

·Waterproof in accordance with IPX-8 (two meters submersible)

Dimensions

Length: 142mm (5.6”)

Head diameter: 68 mm (2.68”)

Head side-length: 57mm (2.24”)

Tube diameter: 50mm (1.96”)

Weight: 442g (15.50oz) (without battery)

Accessories

Charger, quality holster, lanyard, and spare O-ring

Battery Options

Operating Instructions

Battery Installation

Unscrew the battery compartment, insert 4 × 18650 Li-ion or 8 × CR123

batteries with the positive (+) ends pointing toward the flashlight head. Tighten

the battery compartment. In special circumstances, TM26GT can run on as few

as one 18650 or two CR123 batteries.

Thanks for purchasing NITECORE!

Output & Runtime

NOTICE

The above data has been measured in accordance with the international

flashlight testing standards ANSI/NEMA FL1 using 4 x Nitecore 18650（3.7V

3400mAh) and 8 x Nitecore CR123 3V 1700mAh batteries under laboratory （

conditions. The data may vary during real-world use due to battery type,

individual usage habits and environmental factors.

The All-Round Flashlight Expert TM 26GT

Note 1: Using less batteries than standard specification increases battery

output voltage, and may lead to potential dangers. Nitecore

recommends using this feature only when necessary and for short

periods of time. Please see point number 1 in the warning section

below.

Note 2: After installing batteries, “NITECORE” will be displayed on the OLED

screen for 2.5 seconds followed by battery voltage (accurate to

0.01V) for 4 seconds, after which the TM26GT will enter into standby

mode.

WARNING

1. Using less than 4 x 18650 or 8 x CR123 batteries can lead to turbo mode

malfunctioning, trigger the overload protection circuit in Li-ion batteries and

can even lead to explosion of batteries. As such Nitecore recommends that

this function is used with caution and only when necessary.

2. Insert batteries with the positive (+) ends pointing outward.

3. Do not mix rechargeable and non-rechargeable batteries.

4. Do not mix batteries of different types/brands.

5. Do not mix batteries of different charge levels.

6. Do not use lithium batteries without a protection circuit board.

7. This product does not support unprotected flat-top 18650 Li-ion batteries.

Please also ensure that all the 18650 batteries used in the TM26GT have a

button top configuration or they will not make contact with terminals in the

battery compartment. We recommend Nitecore 18650 batteries for the best

performance and reliability.

Charging the TM26GT

1. Connect the charging cable to the flashlight and the A/C power adapter to

the wall outlet as shown in the adjacent image. Fully charging four depleted

18650 batteries takes approximately 7 hours.

2. Under normal charging conditions, the on/off switch’s blue indicator light will

blink twice every second and the OLED screen will display the word

‘Charging...” together with battery voltage.

3. If a problem is detected during charging, the TM26GT will stop charging, the

blue indicator will blink rapidly and the OLED display will show the word

“ERROR”. This is usually caused by faulty or incorrectly inserted batteries.

4. When charging is complete, the blue indicator will remain on, and

“CHG.FINISHED” along with battery voltage will be displayed on the OLED

screen.

*Warning: Charge 18650 rechargeable Li-ion batteries only. Do not attempt to

charge non-rechargeable batteries, CR123 or RCR123 batteries.

TYPE

Nominal voltage

Compatible

Primary Lithium battery * CR123 3V Yes (Compatible but can

NOT be recharged)

Yes (Compatible but can

NOT be recharged)

18650 Rechargeable Li-ion battery 18650 3.7V Yes (Recommended and

can be recharged)

Rechargeable Li-ion battery * RCR123 3.7V

TURBO HIGH MID LOW

LUMENS

1700

LUMENS

3500

LUMENS

540

LUMENS

1h15min

h min30

h min15

h min45

LOWER

LUMENS

1000

750

704m (Beam Distance)

124,000cd (Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m (Impact Resistant)

8×CR123

4×18650

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng

Road, Guangzhou, China 510600

the words “LOCK OUT” as a reminder.

2. When TM26GT is kept in a backpack or left unused for extended

periods, Nitecore recommends the battery compartment is loosened to

cut off the power entirely, thus saving battery power and preventing

accidental activation of the flashlight.

Power Tips

1. With the light turned, the power indicator will blink once every two

seconds when power levels are below 50%.

2. With the light turned, the power indicator will blink rapidly when power

levels are below 10%.

Note: When the light is being used in ultra-low mode, the blue power

indicator will turn off to help conserve power.

Thermal Protection

As the TM26GT is very compact, extended operation in Turbo mode will

cause the body temperature to continually rise, thus, making it too hot to

comfortably hold. As a result, Nitecore does not recommend using the

TM26 in Turbo mode for extended periods. The TM26 has an integrated

thermal protection circuit which prevents overheating. With the light

turned on in Search/Turbo mode, for user safety and to protect the

flashlight from failure, the TM26 will automatically reduce its output to

prevent overheating once it has reached 60 degrees.

Precaution: When the flashlight is hot, do not attempt to cool it by

submerging it in liquid. Due to the differences in internal

and external air pressure the TM26 may suffer irreparable

water damage.

Changing / Charging Batteries

When the power indicator blinks rapidly it means the batteries need to be

replaced or recharged. Alternatively if the light becomes dim or

unresponsive to adjustment this also indicates batteries need to be

replaced or recharged.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a

thin coating of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective /

malfunctioning NITECORE® product can be repaired free of charge for a period

of 60 months (5 years) from the date of purchase. Beyond 60 months (5 years),

a limited warranty applies, covering the cost of labor and maintenance, but not

the cost of accessories or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by

unauthorized

parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please

contact a local NITECORE® distributor or send an email to

service@nitecore.com

※All images, text and statements specified herein this user manual are for

reference purpose only. Should any discrepancy occurs between this manual

and information specified on www.nitecore.com, information on our official

website shall prevail. Sysmax Industry Co., Ltd. reserves the rights to interpret

and amend the content of this document at any time without prior notice.

General Operation

NB: The TM26GT utilizes a 2-stage switch. The light’s numerous functions can

be accessed according to the depth the switch is pressed.

The TM26GT has two modes: Daily mode and Search mode. With the TM26GT

turned off, pressing the switch partway down will activate Daily mode.

Alternatively, with the TM26GT turned off, pressing the switch all the way down

will activate search mode. The TM26GT is turned off by pressing the switch all

the way down.

Brightness Selection in Daily Mode

1. In Daily mode, press the switch partway down to select a brightness level of

ultra-low, low, medium or high. The selected brightness level will be

memorized when the light is turned off.

2. In Daily mode, press the switch partway down and hold to enter turbo mode.

A second partway press will revert back to the brightness level last used.

Brightness Selection in Search Mode

In Search mode, press the switch partway down to cycle between high and

turbo-high levels. There is no memory effect in Search mode.

Momentary Daily / Search Mode

1. With the TM26GT turned off, press the switch partway down and hold to

activate Momentary Daily mode. Release the switch to turn the light off

again.

2. With the TM26GT turned off, press the switch all the way down and hold to

enter Momentary search mode. Release the switch to turn the light off again.

Standby Mode

With the TM26GT turned on, press the switch all the way down and release

within one second to enter standby mode. In this mode, the light will consume

small amounts of power to maintain the settings in the MCU (Micro Control

Unit). When in standby mode the power indicator light will flash once every

three seconds to show the location of the light.

OLED Display

1. When the TM26GT is turned on, the OLED display will activate automatically

and show lumen output, brightness mode, battery voltage, battery status,

approximate runtime and temperature. After displaying this information for

several seconds the OLED display will turn off. The display can be

reactivated by pressing the display switch and the information can be cycled

through with subsequent presses of the switch.

2. When in Standby mode, a single press on the OLED display switch will

activate the OLED and display battery voltage for 10 seconds.

3. When using Nitecore’s NBP52 high-performance battery pack, the actual

runtime will be twice the figure displayed on the OLED panel.

Note: The TM26GT has an integrated thermal protection circuit which

prevents overheating. Please refer to the “Thermal protection” section of

this manual for details.

Special Strobe / SOS mode and

Location Beacon

With the light turned on, press the switch all the way down twice in quick

succession to access strobe mode. When in strobe mode, press the switch

partway down to cycle through SOS, location beacon and strobe modes. To

select any of these modes simply release the switch when it is displayed. To

turn off the light (enter into standby mode) fully press and release the switch.

Note: When in any of the special modes, the OLED display will remain on to

display which mode is being used.

Demonstration Mode

When entering standby mode simultaneously press and hold the display switch

and the on/off switch to enter into Demonstration mode. In Demonstration

mode, the OLED screen will cycle through the TM26’s various messages.

Simply press any button to exit Demonstration mode.

Lockout Function

With the light turned on, press the switch all the way down and hold for more

than one second. The light will turn off and enter lockout mode. Lockout mode

consumes almost no battery power and prevents the light from accidental

activation. Simply press and hold the switch all the way down for more than

one second to exit lockout mode.

Note:

1. If the display button is pressed in lockout mode, the OLED display will show

Thanks for purchasing NITECORE!

The All-Round Flashlight Expert

Please find us on facebook: NITECORE Flashlights

20151015

Produktspezifikationen

Marke:	Nitecore
Kategorie:	Taschenlampe
Modell:	TM26GT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Nitecore TM26GT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Taschenlampe Nitecore

Nitecore MH40 Pro Bedienungsanleitung

6 September 2024

Nitecore HU2000 Bedienungsanleitung

6 September 2024

Nitecore EDC27 UHi Bedienungsanleitung

4 September 2024

Nitecore MT1C Pro Bedienungsanleitung

4 September 2024

Nitecore MT2C Pro Bedienungsanleitung

4 September 2024

Nitecore TM9K Pro Bedienungsanleitung

3 September 2024

Nitecore EDC25 Bedienungsanleitung

3 September 2024

Nitecore NU45 Bedienungsanleitung

2 September 2024

Nitecore TUBE V2.0 Bedienungsanleitung

2 September 2024

Nitecore UT27 Pro Bedienungsanleitung

31 August 2024

Bedienungsanleitung Taschenlampe

Neueste Bedienungsanleitung für -Kategorien-

Ledlenser P9R Core LEP Bedienungsanleitung

15 Oktober 2024

Led Lenser P5R Bedienungsanleitung

12 Oktober 2024

Nordride 5110 Spor Smart A Bedienungsanleitung

7 Oktober 2024

Varta 17631 Bedienungsanleitung

7 Oktober 2024

Varta 18803 Bedienungsanleitung

4 Oktober 2024

Brennenstuhl TL 1201 AF Bedienungsanleitung

1 Oktober 2024

Brennenstuhl TL 601 AF Bedienungsanleitung

1 Oktober 2024

Livarno IAN 66776 Bedienungsanleitung

28 September 2024

Klein Tools KHH56308 Bedienungsanleitung

24 September 2024

Goobay 44561 Bedienungsanleitung

22 September 2024