Nitecore NU10 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Nitecore NU10 (2 Seiten) in der Kategorie Taschenlampe. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
使用头
开关
开关 控制灯白色光操作
R键 控制色光源操
1.开启的3秒内,连续按下开关按键,头灯即可按:超低亮→中亮→高亮→待机,顺序循环切换。
2.在头灯处于点亮状态的3秒内,无任何按键操作,再次按下开关键,头灯关闭并进入待机状态。
注:高亮态下工作45钟后,头将降低亮以防止内温度过热
使用特档位(SOS/标)
在头灯关闭状态下,长按开关键3秒后,头灯进入SOS功能。3秒内,每次单击开关键,头灯按
照:SOS→信标→待机,顺序切换。3秒内无任何按键操作,再次单击直接进入待机。
使用红工作
在头关闭态下,按R键 ,红开启(13流)。开启3秒内再次下,头灯
照:红光照明→警示慢闪→待机,顺序循环切换。若3秒内无任何操作,亦可单击R键关闭红光。
定/
在头关闭态下,同按下双按 ,位于开键的红色示灯闪烁次提头灯
定。锁定后无法开启照明,锁定状态下按任意按钮红色指示灯均闪一下以作提示。如需解锁,
再次下双键。
量提
在头关闭态下,按开关 1,位于开键的电量示灯将闪提示剩余量:
闪烁次表电量大于50%,烁两次表电量少于50%,闪烁一表示电量于10%将近
耗尽。注:当电池电量不足,头灯会出现亮度变暗或者无法调光的情况。此时,应对头灯
进行电。
本产自带USB充功能。掀头灯机身USB保护盖把USB
充电线一端接至USB插孔,一端接上源(适配、电
或其充电备)即可电。充电间约2小时。
充电示:当头处于常充电状位于关按 背面
的红指示将长亮;充电成后,绿指示亮起
注意事项
请根适用当地法律法规处置备/电池
保固
NITECORE 产品拥有售后保固服务。在购买本产品的15天内,如果有任何质量问题均可向®
销商要求免费更换。在购买本产品的24个月内享受免费保固服务。在超过24个月免费保
期后,本产品享有终身有限度保固服务,如需要更换重要部件则需收取成本费用。
本保固规则不适用于以下情况
1. 人为破坏,拆解,改装本产品。
2. 错误操作导致产品损坏。
对奈特科产品有任疑问,欢联系当地代理商或邮件到4008869828@nitecore.cn
本说明书的所有图片、陈述及文字信息仅供参考,请以官网www.nitecore.cn实际信
息为准。广州希脉创新科技有限公司拥有对说明书内容的最终解释权和修改权。
产品特性
·轻巧便携式小头灯
·NU10:采用5颗高性能LED
·NU10 CRI:高显色性灯珠,CRI≥90
·红白双光源组
·内置可充电锂电池,最长续航时间150小时
·自带智能锂电池充电电路,Micro-USB
直充
·双按键开关设计,单手即可操作
·具备3档亮度和两种特殊功能可选(SOS,
信标
·开关按键内藏电量指示灯,可提示电池剩
余电
·泛光照明系统,60°照明角度调节
·灯体采用PC料制造,坚固耐用
·超轻设计,方便携带
·1米防摔能力
体积
尺寸:60.5mm×35mm×29mm(含支架)
重量65克(电池
配件
USB线,头灯带,支
·1·
·3·
NU10/NU10 CRI
使用说明书
亮度&时间
· ·2
®
奈特科尔—全能照明专家
注:以上数据按照国际手电筒测量标准
ANSI/NEMA FL1述之测量法,所使
池为内置电池(3.7V 900mAh)不同
使用环境可能会对以上数据产生影响。
使用主白光
在头灯关闭状态下,按下开关键,主灯白光开启并进入亮度调节模式:
7小时
160流明 160流明 160流明
3515
3
坎德拉 21
坎德拉
60
坎德拉
310
坎德拉
39
IP66(防护等级)
1米(防跌落高度)
高亮
35流明
中亮
1流明
超低亮
13流明
红光 SOS 信标
8小时
45分钟
150小时 5小时
15分钟
7小时
115流明 115流明 115流明
3014
1.5
坎德拉
21
坎德拉
46
坎德拉
220
坎德拉
29
IP66(防护等级)
1米(防跌落高度)
高亮
22流明
中亮
1流明
超低亮
13流明
红光 SOS 信标
8小时
45分钟
150小时 5小时
15分钟
NU10
NU10 CRI
广州希脉创新科技有限公司
咨询热线:+86-20-83862000
销售邮箱:info@nitecore.com
址:www.nitecore.cn
址:广东省广州市天河区高普路1021号5楼6355
编:510653
NU18101022
更多信息请关注新浪微博:NITECORE奈特科
Features
·Lightweight portable headlamp
·NU10:Fitted with 5 high performance LEDs
·NU10 CRI: High colour rendering capability, CRI≥90
·White and red dual outputs
·Built-in Li-ion battery provides runtime up to 150 hours
·Onboard USB charging circuit
·Dual switch design for easy one-handed operation
·3 brightness levels and 2 special modes (SOS, location beacon)
·Built-in power indicator
·Flood-illumination with 6 adjustable angle
·Made from durable PC materials
·Impact resistant to 1 metre
Dimensions
Size: 2.38×1.38” ×1.15
Weight: 2.29oz(with battery)
Output & Runtime
Operating Instructions
Dual Switch
The power switch controls the white light, and the R switch controls the red light.
White Light Illumination
With the light turned off, press the power switch to turn the white light on:
1. Within 3 second from the white light activation, pressing the power switch
repeatedly will cycle through Low-Mid-High-Standby.
2. Pressing the power switch after the white light has been left on in any setting
for more than 3 second will turn the light off.
Note: The NU10 will step down from “High” to the next available output after it has been
on that mode for 45 minutes, this is designed to prevent overheating.
Special Modes(SOS mode / LocationBeacon)
With the light turned off, hold down the power switch for 3 second to enter SOS mode,
press the power switch again within 3 second interval switches the NU10 from
SOS-Beacon-Standby (pressing the power switch again when no action is taken after 3
second turns the light off).
Red Light Illumination
With the light turned off, press the R switch to turn the red light (13 lumens) on, pressing
the R switch again repeatedly within 3 second to cycle through Red illumination-Red
flashing-standby, press the R switch when no action is taken after 3 second will turn the
red light off.
®
The All-Round Flashlight Expert User Manual
NU10/NU10 CRI
SYSMAX Innovations Co., Ltd.
TEL:+86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
AddressUnit 6355, 5/F, No. 1021 Gaopu
Road,Tianhe District, Guangzhou,
510653, Guangdong, China
Please find us on facebook:
NITECORE Flashlight
Made in China
NU18101022
Thanks for purchasing NITECORE!
Lockout/Unlock
Hold down both the power switch and R switch until the built-in power indicator blinks
once to enter lockout mode, all 5 main LEDs will be rendered inoperative in lockout mode,
to unlock, hold down both switches until the power indicator blinks once again.
Power Tips
The built-in power indicator is designed to provide an approximation for remaining battery
level, with the light turned off, hold down the power switch for 1 second, the power
indicator under the power switch will blink to indicate battery level: 3 blinks represent
battery level above 50%, 2 blinks represent battery level below 50%, 1 blink represents
battery level below 10%.
Note: Recharge the NU10 when output appears to be dim or unresponsive.
Recharge
The NU10 comes with a USB cord included. Raise the micro-USB port cover on the NU10
to expose the charging port, connect the port to a power supply with the USB cord
provided. Fully charges the product take approximately 2 hours.
Warnings
Dispose of the device/batteries in accordance with applicable local laws and regulations.
Warranty Details
All NITECORE products are warranted for quality. Any defective /malfunctioning
NITECORE Tube can be repaired free of charge for a period of 24 months from
the date of purchase. Beyond 24 months, a limited warranty applies, covering
the cost of labor and maintenance, but not the cost of accessories or
replacement parts. The warranty is nullified in either or both of the following
situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
For the latest information on NITECORE products and services, please contact ®
a local NITECORE distributor or send an email to service@nitecore.com.®
All images, text and statements specified herein this user manual are for
reference purpose only. Should any discrepancy occurs between this manual
and information specified on www.nitecore.com, information on our official
website shall prevail. SYSMAX Innovations Co., Ltd. reserves the rights to interpret
and amend the content of this document at any time without prior notice.
Accessories
USB cord, head band, holder
NU10 CRI
NU10
Note: The built-in power indicator will be lit to
indicate charging in progress, and will turn green
when the process is completed.
NOTICE: Stated data has been
measured in accordance with the
international flashlight testing standards
ANSI/NEMA FL1 using an integrated
and fully charged 3.7V 900mAh
rechargeable Li-ion battery under
laboratory conditions. End-user results
may vary due to individual usage habits
and environmental conditions.
NOTICE: Stated data has been
measured in accordance with the
international flashlight testing standards
ANSI/NEMA FL1 using an integrated
and fully charged 3.7V 900mAh
rechargeable Li-ion battery under
laboratory conditions. End-user results
may vary due to individual usage habits
and environmental conditions.
HIGH MID
LUMENS LUMENS LUMEN LUMENS LUMENS LUMENS
IP66
(Rated)
1m
(Impact Resistant)
7h
160 160 160
35m15m
3 21cd cd60cd310cd
3m9m
35 1 13
SOS Beacon
8h
45min
150h5h
15min
HIGH MID ULTRALOW RED
HIGH MID
LUMENS LUMENS LUMEN LUMENS LUMENS LUMENS
IP66
(Rated)
1m
(Impact Resistant)
7h
115 115 115
30m14m
1.5 21cd cd46cd220cd
2m9m
22 1 13
SOS Beacon
8h
45min 150h5h
15min
HIGH MID ULTRALOW RED


Produktspezifikationen

Marke: Nitecore
Kategorie: Taschenlampe
Modell: NU10

Brauchst du Hilfe?

Wenn Sie Hilfe mit Nitecore NU10 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Taschenlampe Nitecore

Bedienungsanleitung Taschenlampe

Neueste Bedienungsanleitung für -Kategorien-